diff options
Diffstat (limited to 'docs/interfaces/wireless.rst')
| -rw-r--r-- | docs/interfaces/wireless.rst | 72 |
1 files changed, 67 insertions, 5 deletions
diff --git a/docs/interfaces/wireless.rst b/docs/interfaces/wireless.rst index 406e6685..c1af9cdc 100644 --- a/docs/interfaces/wireless.rst +++ b/docs/interfaces/wireless.rst @@ -133,6 +133,7 @@ about all wireless interfaces. mon.wlan0 monitor ? ? wlan0 AP testing 3 + .. option:: show interfaces wireless detail Use this command to view operational status and detailes wireless-specific @@ -142,8 +143,69 @@ information about all wireless interfaces. vyos@vyos:~$ show interfaces wireless detail wlan0: <NO?CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN0 - link/ether 00:21:91:d1:18:ca brd ff:ff:ff:ff:ff:ff - RX: bytes packets errors dropped overrun mcast - 0 0 0 0 0 0 - TX: bytes packets errors dropped carrier collisions - 0 0 0 0 0 0
\ No newline at end of file + link/ether 00:21:91:d1:18:ca brd ff:ff:ff:ff:ff:ff + RX: bytes packets errors dropped overrun mcast + 0 0 0 0 0 0 + TX: bytes packets errors dropped carrier collisions + 0 0 0 0 0 0 + + +.. option:: show interfaces wireless <wlanX> + +This command shows both status and statistics on the specified wireless interface. +The wireless interface identifier can range from wlan0 to wlan999. + +.. code-block:: sh + + vyos@vyos:~$ show interfaces wireless wlan0 + wlan0: <NO?CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN0 + link/ether 00:21:91:d1:18:ca brd ff:ff:ff:ff:ff:ff + RX: bytes packets errors dropped overrun mcast + 0 0 0 0 0 0 + TX: bytes packets errors dropped carrier collisions + 0 0 0 0 0 0 + + +.. option:: show interfaces wireless <wlanX> brief + +This command gives a brief status overview of a specified wireless interface. +The wireless interface identifier can range from wlan0 to wlan999. + +.. code-block:: sh + + vyos@vyos:~$ show interfaces wireless wlan0 brief + Interface IP Address State Link Description + wlan0 192.168.40.1/24 up up + + +.. option:: show interfaces wireless <wlanX> queue + +Use this command to view wireless interface queue information. +The wireless interface identifier can range from wlan0 to wlan999. + + +.. code-block:: sh + + vyos@vyos:~$ show interfaces wireless wlan0 queue + qdisc pfifo_fast 0: root bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 + Sent 810323 bytes 6016 pkt (dropped 0, overlimits 0 requeues 0) + rate 0bit 0pps backlog 0b 0p requeues 0 + + +.. option:: show interfaces wireless <wlanX> scan + +This command is used to retrive information about WAP within the range of your +wireless interface. This command is usefull on wireless interfaces configured +in station mode. + +.. note:: Scanning is not supported on all wireless drivers and wireless + hardware. Refer to your driver and wireless hardware documentation for + further details. + +.. code-block:: sh + + vyos@vyos:~$ show interfaces wireless wlan0 scan + Access-point SSID Chan Signal (dbm) + 00:53:00:b5:8b:d6 VyOS-TEST-NET 1 -77 + 00:53:29:10:45:03 GUESTS 11 -67 + 00:53:ab:20:45:03 Hotspot 10 -68 |