diff options
Diffstat (limited to 'docs/interfaces/wireless.rst')
| -rw-r--r-- | docs/interfaces/wireless.rst | 92 |
1 files changed, 62 insertions, 30 deletions
diff --git a/docs/interfaces/wireless.rst b/docs/interfaces/wireless.rst index ceb41b5d..e94eb09a 100644 --- a/docs/interfaces/wireless.rst +++ b/docs/interfaces/wireless.rst @@ -1,7 +1,7 @@ -.. _wireless: +.. _wireless-interface: -Wireless Interfaces -------------------- +Wireless (Wi-Fi) +---------------- :abbr:`WLAN (Wireless LAN)` interface provide 802.11 (a/b/g/n/ac) wireless support (commonly referred to as Wi-Fi) by means of compatible hardware. If your @@ -35,7 +35,7 @@ Configuring Access-Point The following example creates a WAP. When configuring multiple WAP interfaces, you must specify unique IP addresses, channels, Network IDs commonly refered -to as :addr:`SSID (Service Set Identifier), and MAC addresses. +to as :abbr:`SSID (Service Set Identifier)`, and MAC addresses. The WAP in this example has the following characteristics: @@ -84,8 +84,8 @@ Resulting in To get it to work as a access point with this configuration you will need to set up a DHCP server to work with that network. You can - of course - also -bridge the Wireless interface with any configured bridge (:ref:`bridge`) on -the system. +bridge the Wireless interface with any configured bridge +(:ref:`bridge-interface`) on the system. WPA/WPA2 enterprise ******************* @@ -196,10 +196,8 @@ about all wireless interfaces. .. code-block:: sh vyos@vyos:~$ show interfaces wireless info - Interface Type SSID Channel - mon.wlan0 monitor ? ? - wlan0 AP testing 3 - + Interface Type SSID Channel + wlan0 access-point VyOS-TEST-0 1 .. option:: show interfaces wireless detail @@ -209,13 +207,29 @@ information about all wireless interfaces. .. code-block:: sh vyos@vyos:~$ show interfaces wireless detail - wlan0: <NO?CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN0 - link/ether 00:21:91:d1:18:ca brd ff:ff:ff:ff:ff:ff - RX: bytes packets errors dropped overrun mcast - 0 0 0 0 0 0 - TX: bytes packets errors dropped carrier collisions - 0 0 0 0 0 0 - + wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 + link/ether XX:XX:XX:XX:XX:c3 brd XX:XX:XX:XX:XX:ff + inet xxx.xxx.99.254/24 scope global wlan0 + valid_lft forever preferred_lft forever + inet6 fe80::xxxx:xxxx:fe54:2fc3/64 scope link + valid_lft forever preferred_lft forever + + RX: bytes packets errors dropped overrun mcast + 66072 282 0 0 0 0 + TX: bytes packets errors dropped carrier collisions + 83413 430 0 0 0 0 + + wlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 + link/ether XX:XX:XX:XX:XX:c3 brd XX:XX:XX:XX:XX:ff + inet xxx.xxx.100.254/24 scope global wlan0 + valid_lft forever preferred_lft forever + inet6 fe80::xxxx:xxxx:ffff:2ed3/64 scope link + valid_lft forever preferred_lft forever + + RX: bytes packets errors dropped overrun mcast + 166072 5282 0 0 0 0 + TX: bytes packets errors dropped carrier collisions + 183413 5430 0 0 0 0 .. option:: show interfaces wireless <wlanX> @@ -225,12 +239,17 @@ The wireless interface identifier can range from wlan0 to wlan999. .. code-block:: sh vyos@vyos:~$ show interfaces wireless wlan0 - wlan0: <NO?CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN0 - link/ether 00:21:91:d1:18:ca brd ff:ff:ff:ff:ff:ff - RX: bytes packets errors dropped overrun mcast - 0 0 0 0 0 0 - TX: bytes packets errors dropped carrier collisions - 0 0 0 0 0 0 + wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 + link/ether XX:XX:XX:XX:XX:c3 brd XX:XX:XX:XX:XX:ff + inet xxx.xxx.99.254/24 scope global wlan0 + valid_lft forever preferred_lft forever + inet6 fe80::xxxx:xxxx:fe54:2fc3/64 scope link + valid_lft forever preferred_lft forever + + RX: bytes packets errors dropped overrun mcast + 66072 282 0 0 0 0 + TX: bytes packets errors dropped carrier collisions + 83413 430 0 0 0 0 .. option:: show interfaces wireless <wlanX> brief @@ -241,8 +260,10 @@ The wireless interface identifier can range from wlan0 to wlan999. .. code-block:: sh vyos@vyos:~$ show interfaces wireless wlan0 brief - Interface IP Address State Link Description - wlan0 192.168.40.1/24 up up + Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down + Interface IP Address S/L Description + --------- ---------- --- ----------- + wlan0 192.0.2.254/24 u/u .. option:: show interfaces wireless <wlanX> queue @@ -250,7 +271,6 @@ The wireless interface identifier can range from wlan0 to wlan999. Use this command to view wireless interface queue information. The wireless interface identifier can range from wlan0 to wlan999. - .. code-block:: sh vyos@vyos:~$ show interfaces wireless wlan0 queue @@ -272,7 +292,19 @@ in station mode. .. code-block:: sh vyos@vyos:~$ show interfaces wireless wlan0 scan - Access-point SSID Chan Signal (dbm) - 00:53:00:b5:8b:d6 VyOS-TEST-NET 1 -77 - 00:53:29:10:45:03 GUESTS 11 -67 - 00:53:ab:20:45:03 Hotspot 10 -68 + Address SSID Channel Signal (dbm) + 00:53:3b:88:6e:d8 WLAN-576405 1 -64.00 + 00:53:3b:88:6e:da Telekom_FON 1 -64.00 + 00:53:00:f2:c2:a4 BabyView_F2C2A4 6 -60.00 + 00:53:3b:88:6e:d6 Telekom_FON 100 -72.00 + 00:53:3b:88:6e:d4 WLAN-576405 100 -71.00 + 00:53:44:a4:96:ec KabelBox-4DC8 56 -81.00 + 00:53:d9:7a:67:c2 WLAN-741980 1 -75.00 + 00:53:7c:99:ce:76 Vodafone Homespot 1 -86.00 + 00:53:44:a4:97:21 KabelBox-4DC8 1 -78.00 + 00:53:44:a4:97:21 Vodafone Hotspot 1 -79.00 + 00:53:44:a4:97:21 Vodafone Homespot 1 -79.00 + 00:53:86:40:30:da Telekom_FON 1 -86.00 + 00:53:7c:99:ce:76 Vodafone Hotspot 1 -86.00 + 00:53:44:46:d2:0b Vodafone Hotspot 1 -87.00 + |