5 files changed, 44 insertions, 46 deletions
diff --git a/docs/interfaces/bond.rst b/docs/interfaces/bond.rst
index 21088c02..eea35e2c 100644
--- a/docs/interfaces/bond.rst
+++ b/docs/interfaces/bond.rst
@@ -256,6 +256,13 @@ Bond options
    The maximum number of targets that can be specified is 16. The default value
    is no IP addresses.
 
+VLAN
+====
+
+.. cmdinclude:: ../_include/interface-vlan.txt
+   :var0: bond
+   :var1: bond0
+
 *******
 Example
 *******
diff --git a/docs/interfaces/bridge.rst b/docs/interfaces/bridge.rst
index 058d7b01..045ae2a8 100644
--- a/docs/interfaces/bridge.rst
+++ b/docs/interfaces/bridge.rst
@@ -113,56 +113,27 @@ links providing fault tolerance if an active link fails.
    Designated Bridges. Hello packets are used to communicate information
    about the topology throughout the entire Bridged Local Area Network.
 
-Enable VLAN-aware bridge
--------------------------
+VLAN
+====
 
-.. cfgcmd:: set interfaces bridge <interface> member interface <member> native-vlan <vlan-id>
-
-   Set the native VLAN ID flag of the interface. When a data packet without a VLAN tag enters
-   the port, the data packet will be forced to add a tag of a specific vlan id. When the vlan 
-   id flag flows out, the tag of the vlan id will be stripped
-
-.. cfgcmd:: set interfaces bridge <interface> member interface <member> allowed-vlan <vlan-id>
-
-   Allows specific VLAN IDs to pass through the bridge member interface
-
-.. cfgcmd:: set interfaces bridge <interface> member interface <member> allowed-vlan <n-m>
-
-   `n` and `m` represent a VLAN ID, which identifies a VLAN ID range and allows all VLAN IDS in this range to pass through the bridge member interface
-
-VLAN (802.1q) configuration
----------------------------
-
-IEEE 802.1q, often referred to as Dot1q, is the networking standard that supports
-virtual LANs (VLANs) on an IEEE 802.3 Ethernet network. The standard defines a
-system of VLAN tagging for Ethernet frames and the accompanying procedures to be
-used by bridges and switches in handling such frames. The standard also contains
-provisions for a quality-of-service prioritization scheme commonly known as IEEE
-802.1p and defines the Generic Attribute Registration Protocol.
-
-Portions of the network which are VLAN-aware (i.e., IEEE 802.1q conformant) can
-include VLAN tags. When a frame enters the VLAN-aware portion of the network, a
-tag is added to represent the VLAN membership. Each frame must be distinguishable
-as being within exactly one VLAN. A frame in the VLAN-aware portion of the network
-that does not contain a VLAN tag is assumed to be flowing on the native VLAN.
-
-The standard was developed by IEEE 802.1, a working group of the IEEE 802
-standards committee, and continues to be actively revised. One of the notable
-revisions is 802.1Q-2014 which incorporated IEEE 802.1aq (Shortest Path Bridging)
-and much of the IEEE 802.1d standard.
-
-802.1q VLAN interfaces are represented as virtual sub-interfaces in VyOS. The
-term used for this is ``vif``.
+.. cmdinclude:: ../_include/interface-vlan.txt
+   :var0: bridge
+   :var1: br0
 
-.. cfgcmd:: set interfaces bridge <interface> vif <vlan-id>
+.. cfgcmd:: set interfaces bridge <interface> member interface <member>
+   native-vlan <vlan-id>
 
-  Create a new VLAN interface on interface `<interface>` using the VLAN number
-  provided via `<vlan-id>`.
+   Set the native VLAN ID flag of the interface. When a data packet without a
+   VLAN tag enters the port, the data packet will be forced to add a tag of a
+   specific vlan id. When the vlan id flag flows out, the tag of the vlan id
+   will be stripped
 
-  You can create multiple VLAN interfaces on a physical interface. The VLAN ID
-  range is from 1 to 4094.
+.. cfgcmd:: set interfaces bridge <interface> member interface <member>
+   allowed-vlan <vlan-id>
 
-  .. note:: Only 802.1Q-tagged packets are accepted on Bridge vifs.
+   Allows specific VLAN IDs to pass through the bridge member interface. This
+   can either be an individual VLAN id or a range of VLAN ids delimited by a
+   hyphen.
 
 *******
 Example
diff --git a/docs/interfaces/ethernet.rst b/docs/interfaces/ethernet.rst
index 71a340b1..343a7d59 100644
--- a/docs/interfaces/ethernet.rst
+++ b/docs/interfaces/ethernet.rst
@@ -49,6 +49,13 @@ Ethernet options
 
    VyOS default will be `auto`.
 
+VLAN
+====
+
+.. cmdinclude:: ../_include/interface-vlan.txt
+   :var0: ethernet
+   :var1: eth0
+
 *********
 Operation
 *********
diff --git a/docs/interfaces/pseudo-ethernet.rst b/docs/interfaces/pseudo-ethernet.rst
index b373a617..d4eb8eff 100644
--- a/docs/interfaces/pseudo-ethernet.rst
+++ b/docs/interfaces/pseudo-ethernet.rst
@@ -56,3 +56,10 @@ Pseudo Ethernet/MACVLAN options
 
    Specifies the physical `<ethX>` Ethernet interface associated with a Pseudo
    Ethernet `<interface>`.
+
+VLAN
+====
+
+.. cmdinclude:: ../_include/interface-vlan.txt
+   :var0: pseudo-ethernet
+   :var1: peth0
diff --git a/docs/interfaces/wireless.rst b/docs/interfaces/wireless.rst
index 75c42f29..b51eb274 100644
--- a/docs/interfaces/wireless.rst
+++ b/docs/interfaces/wireless.rst
@@ -274,7 +274,6 @@ VHT (Very High Throughput) capabilities (802.11ac)
 
   Station supports receiving VHT variant HT Control field
 
-
 Wireless options (Station/Client)
 =================================
 
@@ -373,6 +372,13 @@ Resulting in
   }
 
 
+VLAN
+====
+
+.. cmdinclude:: ../_include/interface-vlan.txt
+   :var0: wireless
+   :var1: wlan0
+
 *********
 Operation
 *********