diff options
Diffstat (limited to 'docs/interfaces')
| -rw-r--r-- | docs/interfaces/bridging.rst | 43 | ||||
| -rw-r--r-- | docs/interfaces/l2tpv3.rst | 6 | ||||
| -rw-r--r-- | docs/interfaces/vxlan.rst | 52 |
3 files changed, 54 insertions, 47 deletions
diff --git a/docs/interfaces/bridging.rst b/docs/interfaces/bridging.rst index e42d76ad..dbd5f0db 100644 --- a/docs/interfaces/bridging.rst +++ b/docs/interfaces/bridging.rst @@ -5,15 +5,23 @@ Interfaces in VyOS can be bridged together to provide software switching of Layer-2 traffic. A bridge is created when a bridge interface is defined. In the example below -we will be creating a bridge for VLAN 100 and assigning a VIF to the bridge. +we create a bridge named br100 with eth1 and eth2 as the bridge member ports. .. code-block:: sh set interfaces bridge 'br100' - ~~set interfaces ethernet eth1 vif 100 bridge-group bridge br100~~ - set interfaces bridge br100 member interface eth1 - -Interfaces assigned to a bridge-group do not have address configuration. An IP + set interfaces bridge br100 member interface eth1 + set interfaces bridge br100 member interface eth2 + +Each bridge member can be assiged a port cost and priority using the following +commands: + +.. code-block:: sh + + set interfaces bridge br100 member interface eth1 cost 10 + set interfaces bridge br100 member interface eth1 priority 1024 + +Interfaces assigned to a bridge do not have address configuration. An IP address can be assigned to the bridge interface itself, however, like any normal interface. @@ -29,16 +37,17 @@ Example Result: bridge br100 { address 192.168.100.1/24 address 2001:db8:100::1/64 - } - [...] - ethernet eth1 { - [...] - vif 100 { - bridge-group { - bridge br100 + member { + interface eth1 { + cost 10 + priority 1024 + } + interface eth2 { } } + } + [...] In addition to normal IP interface configuration, bridge interfaces support Spanning-Tree Protocol. STP is disabled by default. @@ -46,20 +55,16 @@ Spanning-Tree Protocol. STP is disabled by default. .. note:: Please use caution when introducing spanning-tree protocol on a network as it may result in topology changes. -To enable spanning-tree use the -`set interfaces bridge <name> stp true` command: +To enable spanning-tree use the `set interfaces bridge <name> stp` command: .. code-block:: sh - set interfaces bridge br100 stp true + set interfaces bridge br100 stp STP `priority`, `forwarding-delay`, `hello-time`, and `max-age` can be -configured for the bridge-group. The MAC aging time can also be configured +configured for the bridge. The MAC aging time can also be configured using the `aging` directive. -For member interfaces, the bridge-group `priority` and `cost` can be -configured. - The `show bridge` operational command can be used to display configured bridges: diff --git a/docs/interfaces/l2tpv3.rst b/docs/interfaces/l2tpv3.rst index 2238c970..4cc296ca 100644 --- a/docs/interfaces/l2tpv3.rst +++ b/docs/interfaces/l2tpv3.rst @@ -95,14 +95,14 @@ Bridge: # remote side in this example: # set interfaces bridge br0 address '172.16.30.18/30' set interfaces bridge br0 address '172.16.30.17/30' - set interfaces ethernet eth0 bridge-group bridge 'br0' + set interfaces bridge br0 member interface eth0 set interfaces ethernet eth0 description 'L2 VPN Physical port' L2TPv3: .. code-block:: sh - set interfaces l2tpv3 l2tpeth0 bridge-group bridge 'br0' + set interfaces bridge br0 member interface 'l2tpeth0' set interfaces l2tpv3 l2tpeth0 description 'L2 VPN Tunnel' set interfaces l2tpv3 l2tpeth0 destination-port '5000' set interfaces l2tpv3 l2tpeth0 encapsulation 'ip' @@ -116,4 +116,4 @@ L2TPv3: set interfaces l2tpv3 l2tpeth0 tunnel-id '10' .. _`Wikipedia L2TPv3`: http://en.wikipedia.org/wiki/L2TPv3 -.. _`RFC3921`: https://tools.ietf.org/html/rfc3931
\ No newline at end of file +.. _`RFC3921`: https://tools.ietf.org/html/rfc3931 diff --git a/docs/interfaces/vxlan.rst b/docs/interfaces/vxlan.rst index 75628953..2795fc75 100644 --- a/docs/interfaces/vxlan.rst +++ b/docs/interfaces/vxlan.rst @@ -49,7 +49,6 @@ Configuration commands interfaces vxlan <vxlan[0-16777215]> address # IP address of the VXLAN interface - bridge-group # Configure a L2 bridge-group description # Description group <ipv4> # IPv4 Multicast group address (required) ip # IPv4 routing options @@ -120,16 +119,18 @@ Leaf2 configuration: ! Our first vxlan interface set interfaces bridge br241 address '172.16.241.1/24' - set interfaces ethernet eth1 vif 241 bridge-group bridge 'br241' - set interfaces vxlan vxlan241 bridge-group bridge 'br241' + set interfaces bridge br241 member interface 'eth1.241' + set interfaces bridge br241 member interface 'vxlan241' + set interfaces vxlan vxlan241 group '239.0.0.241' set interfaces vxlan vxlan241 link 'eth0' set interfaces vxlan vxlan241 vni '241' ! Our seconds vxlan interface set interfaces bridge br242 address '172.16.242.1/24' - set interfaces ethernet eth1 vif 242 bridge-group bridge 'br242' - set interfaces vxlan vxlan242 bridge-group bridge 'br242' + set interfaces bridge br242 member interface 'eth1.242' + set interfaces bridge br242 member interface 'vxlan242' + set interfaces vxlan vxlan242 group '239.0.0.242' set interfaces vxlan vxlan242 link 'eth0' set interfaces vxlan vxlan242 vni '242' @@ -143,16 +144,18 @@ Leaf3 configuration: ! Our first vxlan interface set interfaces bridge br241 address '172.16.241.1/24' - set interfaces ethernet eth1 vif 241 bridge-group bridge 'br241' - set interfaces vxlan vxlan241 bridge-group bridge 'br241' + set interfaces bridge br241 member interface 'eth1.241' + set interfaces bridge br241 member interface 'vxlan241' + set interfaces vxlan vxlan241 group '239.0.0.241' set interfaces vxlan vxlan241 link 'eth0' set interfaces vxlan vxlan241 vni '241' ! Our seconds vxlan interface set interfaces bridge br242 address '172.16.242.1/24' - set interfaces ethernet eth1 vif 242 bridge-group bridge 'br242' - set interfaces vxlan vxlan242 bridge-group bridge 'br242' + set interfaces bridge br242 member interface 'eth1.242' + set interfaces bridge br242 member interface 'vxlan242' + set interfaces vxlan vxlan242 group '239.0.0.242' set interfaces vxlan vxlan242 link 'eth0' set interfaces vxlan vxlan242 vni '242' @@ -175,11 +178,11 @@ advertised. .. code-block:: sh - set interfaces ethernet eth1 vif 241 bridge-group bridge 'br241' - set interfaces vxlan vxlan241 bridge-group bridge 'br241' + set interfaces bridge br241 member interface 'eth1.241' + set interfaces bridge br241 member interface 'vxlan241' -Binds eth1 vif 241 and vxlan241 to each other by putting them in the same -bridge-group. Internal VyOS requirement. +Binds eth1.241 and vxlan241 to each other by making them both member interfaces of +the same bridge. .. code-block:: sh @@ -221,6 +224,10 @@ vxlan interface as routing interface. interfaces { bridge br0 { + member { + interface vxlan0 { + } + } } ethernet eth0 { address dhcp @@ -228,9 +235,6 @@ vxlan interface as routing interface. loopback lo { } vxlan vxlan0 { - bridge-group { - bridge br0 - } group 239.0.0.1 vni 0 } @@ -246,22 +250,23 @@ Here is a working configuration that creates a VXLAN between two routers. Each router has a VLAN interface (26) facing the client devices and a VLAN interface (30) that connects it to the other routers. With this configuration, traffic can flow between both routers' VLAN 26, but can't escape since there is no L3 -gateway. You can add an IP to a bridge-group to create a gateway. +gateway. You can add an IP to a bridge to create a gateway. .. code-block:: sh interfaces { bridge br0 { + member { + interface eth0.26 { + } + interface vxlan0 { + } + } } ethernet eth0 { duplex auto smp-affinity auto speed auto - vif 26 { - bridge-group { - bridge br0 - } - } vif 30 { address 10.7.50.6/24 } @@ -269,9 +274,6 @@ gateway. You can add an IP to a bridge-group to create a gateway. loopback lo { } vxlan vxlan0 { - bridge-group { - bridge br0 - } group 239.0.0.241 vni 241 } |