diff options
Diffstat (limited to 'docs/operation/ip-commands.rst')
| -rw-r--r-- | docs/operation/ip-commands.rst | 258 |
1 files changed, 0 insertions, 258 deletions
diff --git a/docs/operation/ip-commands.rst b/docs/operation/ip-commands.rst deleted file mode 100644 index eba4fd90..00000000 --- a/docs/operation/ip-commands.rst +++ /dev/null @@ -1,258 +0,0 @@ -.. _ip-commands: - -########### -IP commands -########### - -IPv4 -==== - -System configuration commands ------------------------------ - -.. cfgcmd:: set system ip disable-forwarding - - Use this command to disable IPv4 forwarding on all interfaces. - -.. cfgcmd:: set system ip arp table-size <number> - - Use this command to define the maximum number of entries to keep in - the ARP cache (1024, 2048, 4096, 8192, 16384, 32768). - -.. cfgcmd:: set system ip multipath layer4-hashing - - Use this command to use Layer 4 information for IPv4 ECMP hashing. - - -Operational commands --------------------- - -show commands -^^^^^^^^^^^^^ - -See below the different parameters available for the IPv4 **show** command: - -.. code-block:: none - - vyos@vyos:~$ show ip - Possible completions: - access-list Show all IP access-lists - as-path-access-list - Show all as-path-access-lists - bgp Show Border Gateway Protocol (BGP) information - community-list - Show IP community-lists - extcommunity-list - Show extended IP community-lists - forwarding Show IP forwarding status - groups Show IP multicast group membership - igmp Show IGMP (Internet Group Management Protocol) information - large-community-list - Show IP large-community-lists - multicast Show IP multicast - ospf Show IPv4 Open Shortest Path First (OSPF) routing information - pim Show PIM (Protocol Independent Multicast) information - ports Show IP ports in use by various system services - prefix-list Show all IP prefix-lists - protocol Show IP route-maps per protocol - rip Show Routing Information Protocol (RIP) information - route Show IP routes - - -reset commands -^^^^^^^^^^^^^^ - -And the different IPv4 **reset** commands available: - -.. code-block:: none - - vyos@vyos:~$ reset ip - Possible completions: - arp Reset Address Resolution Protocol (ARP) cache - bgp Clear Border Gateway Protocol (BGP) statistics or status - igmp IGMP clear commands - multicast IP multicast routing table - route Reset IP route - -IPv6 -==== - -System configuration commands ------------------------------ - -.. cfgcmd:: set system ipv6 disable - - Use this command to disable assignment of IPv6 addresses on all - interfaces. - -.. cfgcmd:: set system ipv6 disable-forwarding - - Use this command to disable IPv6 forwarding on all interfaces. - -.. cfgcmd:: set system ipv6 neighbor table-size <number> - - Use this command to define the maximum number of entries to keep in - the Neighbor cache (1024, 2048, 4096, 8192, 16384, 32768). - -.. cfgcmd:: set system ipv6 strict-dad - - Use this command to disable IPv6 operation on interface when - Duplicate Address Detection fails on Link-Local address. - -.. cfgcmd:: set system ipv6 multipath layer4-hashing - - Use this command to user Layer 4 information for ECMP hashing. - - -Operational commands --------------------- - -Show commands -^^^^^^^^^^^^^ - -.. opcmd:: show ipv6 neighbors - - Use this command to show IPv6 Neighbor Discovery Protocol information. - -.. opcmd:: show ipv6 groups - - Use this command to show IPv6 multicast group membership. - -.. opcmd:: show ipv6 forwarding - - Use this command to show IPv6 forwarding status. - -.. opcmd:: show ipv6 route - - Use this command to show IPv6 routes. - - Check the many parameters available for the `show ipv6 route` command: - - .. code-block:: none - - vyos@vyos:~$ show ipv6 route - Possible completions: - <Enter> Execute the current command - <X:X::X:X> Show IPv6 routes of given address or prefix - <X:X::X:X/M> - bgp Show IPv6 BGP routes - cache Show kernel IPv6 route cache - connected Show IPv6 connected routes - forward Show kernel IPv6 route table - isis Show IPv6 ISIS routes - kernel Show IPv6 kernel routes - ospfv3 Show IPv6 OSPF6 routes - ripng Show IPv6 RIPNG routes - static Show IPv6 static routes - summary Show IPv6 routes summary - table Show IP routes in policy table - vrf Show IPv6 routes in VRF - - -.. opcmd:: show ipv6 prefix-list - - Use this command to show all IPv6 prefix lists - - There are different parameters for getting prefix-list information: - - .. code-block:: none - - vyos@vyos:~$ show ipv6 prefix-list - Possible completions: - <Enter> Execute the current command - <WORD> Show specified IPv6 prefix-list - detail Show detail of IPv6 prefix-lists - summary Show summary of IPv6 prefix-lists - -.. opcmd:: show ipv6 access-list - - Use this command to show all IPv6 access lists - - You can also specify which IPv6 access-list should be shown: - - .. code-block:: none - - vyos@vyos:~$ show ipv6 access-list - Possible completions: - <Enter> Execute the current command - <text> Show specified IPv6 access-list - -.. opcmd:: show ipv6 bgp - - Use this command to show IPv6 Border Gateway Protocol information. - - - In addition, you can specify many other parameters to get BGP - information: - - .. code-block:: none - - vyos@vyos:~$ show ipv6 bgp - Possible completions: - <Enter> Execute the current command - <X:X::X:X> Show BGP information for given address or prefix - <X:X::X:X/M> - community Show routes matching the communities - community-list - Show routes matching the community-list - filter-list Show routes conforming to the filter-list - large-community - Show routes matching the large-community-list - large-community-list - neighbors Show detailed information on TCP and BGP neighbor connections - prefix-list Show routes matching the prefix-list - regexp Show routes matching the AS path regular expression - route-map Show BGP routes matching the specified route map - summary Show summary of BGP neighbor status - - -.. opcmd:: show ipv6 ospfv3 - - Use this command to get information about OSPFv3. - - You can get more specific OSPFv3 information by using the parameters - shown below: - - .. code-block:: none - - vyos@vyos:~$ show ipv6 ospfv3 - Possible completions: - <Enter> Execute the current command - area Show OSPFv3 spf-tree information - border-routers - Show OSPFv3 border-router (ABR and ASBR) information - database Show OSPFv3 Link state database information - interface Show OSPFv3 interface information - linkstate Show OSPFv3 linkstate routing information - neighbor Show OSPFv3 neighbor information - redistribute Show OSPFv3 redistribute External information - route Show OSPFv3 routing table information - -.. opcmd:: show ipv6 ripng - - Use this command to get information about the RIPNG protocol - -.. opcmd:: show ipv6 ripng status - - Use this command to show the status of the RIPNG protocol - - -Reset commands -^^^^^^^^^^^^^^ - -.. opcmd:: reset ipv6 bgp <address> - - Use this command to clear Border Gateway Protocol statistics or - status. - - -.. opcmd:: reset ipv6 neighbors <address | interface> - - Use this command to reset IPv6 Neighbor Discovery Protocol cache for - an address or interface. - -.. opcmd:: reset ipv6 route cache - - Use this command to flush the kernel IPv6 route cache. - An address can be added to flush it only for that route. - |