diff options
Diffstat (limited to 'docs/routing/bgp.rst')
| -rw-r--r-- | docs/routing/bgp.rst | 144 |
1 files changed, 0 insertions, 144 deletions
diff --git a/docs/routing/bgp.rst b/docs/routing/bgp.rst deleted file mode 100644 index f0550fd4..00000000 --- a/docs/routing/bgp.rst +++ /dev/null @@ -1,144 +0,0 @@ -.. _routing-bgp: - -Border Gateway Protocol (BGP) ------------------------------ - -IPv4 -^^^^ - -A simple eBGP configuration: - -**Node 1:** - -.. code-block:: none - - set protocols bgp 65534 neighbor 192.168.0.2 ebgp-multihop '2' - set protocols bgp 65534 neighbor 192.168.0.2 remote-as '65535' - set protocols bgp 65534 neighbor 192.168.0.2 update-source '192.168.0.1' - set protocols bgp 65534 address-family ipv4-unicast network '172.16.0.0/16' - set protocols bgp 65534 parameters router-id '192.168.0.1' - -**Node 2:** - -.. code-block:: none - - set protocols bgp 65535 neighbor 192.168.0.1 ebgp-multihop '2' - set protocols bgp 65535 neighbor 192.168.0.1 remote-as '65534' - set protocols bgp 65535 neighbor 192.168.0.1 update-source '192.168.0.2' - set protocols bgp 65535 address-family ipv4-unicast network '172.17.0.0/16' - set protocols bgp 65535 parameters router-id '192.168.0.2' - - -Don't forget, the CIDR declared in the network statement MUST **exist in your -routing table (dynamic or static), the best way to make sure that is true is -creating a static route:** - -**Node 1:** - -.. code-block:: none - - set protocols static route 172.16.0.0/16 blackhole distance '254' - -**Node 2:** - -.. code-block:: none - - set protocols static route 172.17.0.0/16 blackhole distance '254' - - -IPv6 -^^^^ - -A simple BGP configuration via IPv6. - -**Node 1:** - -.. code-block:: none - - set protocols bgp 65534 neighbor 2001:db8::2 ebgp-multihop '2' - set protocols bgp 65534 neighbor 2001:db8::2 remote-as '65535' - set protocols bgp 65534 neighbor 2001:db8::2 update-source '2001:db8::1' - set protocols bgp 65534 neighbor 2001:db8::2 address-family ipv6-unicast - set protocols bgp 65534 address-family ipv6-unicast network '2001:db8:1::/48' - set protocols bgp 65534 parameters router-id '10.1.1.1' - -**Node 2:** - -.. code-block:: none - - set protocols bgp 65535 neighbor 2001:db8::1 ebgp-multihop '2' - set protocols bgp 65535 neighbor 2001:db8::1 remote-as '65534' - set protocols bgp 65535 neighbor 2001:db8::1 update-source '2001:db8::2' - set protocols bgp 65535 neighbor 2001:db8::1 address-family ipv6-unicast - set protocols bgp 65535 address-family ipv6-unicast network '2001:db8:2::/48' - set protocols bgp 65535 parameters router-id '10.1.1.2' - -Don't forget, the CIDR declared in the network statement **MUST exist in your -routing table (dynamic or static), the best way to make sure that is true is -creating a static route:** - -**Node 1:** - -.. code-block:: none - - set protocols static route6 2001:db8:1::/48 blackhole distance '254' - -**Node 2:** - -.. code-block:: none - - set protocols static route6 2001:db8:2::/48 blackhole distance '254' - -Route Filter -^^^^^^^^^^^^ - -Route filter can be applied using a route-map: - -**Node1:** - -.. code-block:: none - - set policy prefix-list AS65535-IN rule 10 action 'permit' - set policy prefix-list AS65535-IN rule 10 prefix '172.16.0.0/16' - set policy prefix-list AS65535-OUT rule 10 action 'deny' - set policy prefix-list AS65535-OUT rule 10 prefix '172.16.0.0/16' - set policy prefix-list6 AS65535-IN rule 10 action 'permit' - set policy prefix-list6 AS65535-IN rule 10 prefix '2001:db8:2::/48' - set policy prefix-list6 AS65535-OUT rule 10 action 'deny' - set policy prefix-list6 AS65535-OUT rule 10 prefix '2001:db8:2::/48' - set policy route-map AS65535-IN rule 10 action 'permit' - set policy route-map AS65535-IN rule 10 match ip address prefix-list 'AS65535-IN' - set policy route-map AS65535-IN rule 10 match ipv6 address prefix-list 'AS65535-IN' - set policy route-map AS65535-IN rule 20 action 'deny' - set policy route-map AS65535-OUT rule 10 action 'deny' - set policy route-map AS65535-OUT rule 10 match ip address prefix-list 'AS65535-OUT' - set policy route-map AS65535-OUT rule 10 match ipv6 address prefix-list 'AS65535-OUT' - set policy route-map AS65535-OUT rule 20 action 'permit' - set protocols bgp 65534 neighbor 2001:db8::2 route-map export 'AS65535-OUT' - set protocols bgp 65534 neighbor 2001:db8::2 route-map import 'AS65535-IN' - -**Node2:** - -.. code-block:: none - - set policy prefix-list AS65534-IN rule 10 action 'permit' - set policy prefix-list AS65534-IN rule 10 prefix '172.17.0.0/16' - set policy prefix-list AS65534-OUT rule 10 action 'deny' - set policy prefix-list AS65534-OUT rule 10 prefix '172.17.0.0/16' - set policy prefix-list6 AS65534-IN rule 10 action 'permit' - set policy prefix-list6 AS65534-IN rule 10 prefix '2001:db8:1::/48' - set policy prefix-list6 AS65534-OUT rule 10 action 'deny' - set policy prefix-list6 AS65534-OUT rule 10 prefix '2001:db8:1::/48' - set policy route-map AS65534-IN rule 10 action 'permit' - set policy route-map AS65534-IN rule 10 match ip address prefix-list 'AS65534-IN' - set policy route-map AS65534-IN rule 10 match ipv6 address prefix-list 'AS65534-IN' - set policy route-map AS65534-IN rule 20 action 'deny' - set policy route-map AS65534-OUT rule 10 action 'deny' - set policy route-map AS65534-OUT rule 10 match ip address prefix-list 'AS65534-OUT' - set policy route-map AS65534-OUT rule 10 match ipv6 address prefix-list 'AS65534-OUT' - set policy route-map AS65534-OUT rule 20 action 'permit' - set protocols bgp 65535 neighbor 2001:db8::1 route-map export 'AS65534-OUT' - set protocols bgp 65535 neighbor 2001:db8::1 route-map import 'AS65534-IN' - -We could expand on this and also deny link local and multicast in the rule 20 -action deny. |