1 files changed, 63 insertions, 16 deletions
diff --git a/docs/routing/igmp-proxy.rst b/docs/routing/igmp-proxy.rst
index d08c42e2..3e69dcc5 100644
--- a/docs/routing/igmp-proxy.rst
+++ b/docs/routing/igmp-proxy.rst
@@ -1,26 +1,73 @@
 .. _igmp_proxy:
 
+##########
 IGMP Proxy
-==========
+##########
 
-Internet Group Management Protocol (IGMP)
+:abbr:`IGMP (Internet Group Management Protocol)` proxy sends IGMP host messages
+on behalf of a connected client. The configuration must define one, and only one
+upstream interface, and one or more downstream interfaces.
 
-A IGMP Proxy to send IGMP host messages on behalf of a connected client.
-The configuration must define one upstream interface, and one or more downstream interfaces.
-If multicast traffic originates outside the upstream subnet, the "alt-subnet" option can be used in order to define legal multicast sources.
+Configuration
+=============
 
-simple example:
----------------
+.. cfgcmd:: set protocols igmp-proxy interface <interface> role <upstream | downstream>
 
-Interface eth1 LAN is behind NAT. In order to subscribe 10.0.0.0/23 subnet multicast which is in eth0 WAN we need igmp-proxy.
+   * **upstream:** The upstream network interface is the outgoing interface
+     which is responsible for communicating to available multicast data sources.
+     There can only be one upstream interface.
+
+   * **downstream:** Downstream network interfaces are the distribution
+     interfaces to the destination networks, where multicast clients can join
+     groups and receive multicast data. One or more downstream interfaces must
+     be configured.
+
+.. cfgcmd:: set protocols igmp-proxy interface <interface> alt-subnet <network>
+
+   Defines alternate sources for multicasting and IGMP data. The network address
+   must be on the following format 'a.b.c.d/n'. By default the router will
+   accept data from sources on the same network as configured on an interface.
+   If the multicast source lies on a remote network, one must define from where
+   traffic should be accepted.
+
+   This is especially useful for the upstream interface, since the source for
+   multicast traffic is often from a remote location.
+
+   This option can be supplied multiple times.
+
+.. cfgcmd:: set protocols igmp-proxy disable-quickleave
+
+   Disables quickleave mode. In this mode the daemon will not send a Leave IGMP
+   message upstream as soon as it receives a Leave message for any downstream
+   interface. The daemon will not ask for Membership reports on the downstream
+   interfaces, and if a report is received the group is not joined again
+   upstream.
+
+   If it's vital that the daemon should act exactly as a real multicast client
+   on the upstream interface, this function should be enabled.
+
+   Enabling this function increases the risk of bandwidth saturation.
+
+.. cfgcmd:: set protocols igmp-proxy disable
+
+   Disable this service.
+
+Example
+-------
+
+Interface `eth1` LAN is behind NAT. In order to subscribe `10.0.0.0/23` subnet
+multicast which is in `eth0` WAN we need to configure igmp-proxy.
 
 .. code-block:: none
 
-  # show protocols igmp-proxy
-  interface eth0 {
-      alt-subnet 10.0.0.0/23
-      role upstream
-  }
-  interface eth1 {
-      role downstream
-  }
-\ No newline at end of file
+  set protocols igmp-proxy interface eth0 role upstream
+  set protocols igmp-proxy interface eth0 alt-subnet 10.0.0.0/23
+  set protocols igmp-proxy interface eth1 role downstream
+
+Operation
+=========
+
+.. opcmd:: restart igmp-proxy
+
+   Restart the IGMP proxy process.
+