diff options
Diffstat (limited to 'docs/routing/ospf.rst')
| -rw-r--r-- | docs/routing/ospf.rst | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/docs/routing/ospf.rst b/docs/routing/ospf.rst index 06840214..1e70f644 100644 --- a/docs/routing/ospf.rst +++ b/docs/routing/ospf.rst @@ -17,13 +17,13 @@ OSPFv2 (IPv4) In order to have a VyOS system exchanging routes with OSPF neighbors, you will at least need to configure the area and a network, -.. code-block:: console +.. code-block:: none set protocols ospf area 0 network 192.168.0.0/24 as well as the router ID. -.. code-block:: console +.. code-block:: none set protocols ospf parameters router-id 10.1.1.1 @@ -33,7 +33,7 @@ Below you can see a typical configuration using 2 nodes, redistribute loopback a **Node 1** -.. code-block:: console +.. code-block:: none set interfaces loopback lo address 10.1.1.1/32 set protocols ospf area 0 network 192.168.0.0/24 @@ -50,7 +50,7 @@ Below you can see a typical configuration using 2 nodes, redistribute loopback a **Node 2** -.. code-block:: console +.. code-block:: none set interfaces loopback lo address 10.2.2.2/32 set protocols ospf area 0 network 192.168.0.0/24 @@ -69,7 +69,7 @@ A typical configuration using 2 nodes. **Node 1:** -.. code-block:: console +.. code-block:: none set protocols ospfv3 area 0.0.0.0 interface eth1 set protocols ospfv3 area 0.0.0.0 range 2001:db8:1::/64 @@ -78,7 +78,7 @@ A typical configuration using 2 nodes. **Node 2:** -.. code-block:: console +.. code-block:: none set protocols ospfv3 area 0.0.0.0 interface eth1 set protocols ospfv3 area 0.0.0.0 range 2001:db8:2::/64 @@ -93,7 +93,7 @@ Example configuration for WireGuard interfaces: **Node 1** -.. code-block:: console +.. code-block:: none set interfaces wireguard wg01 address 'fe80::216:3eff:fe51:fd8c/64' set interfaces wireguard wg01 address '192.168.0.1/24' @@ -108,7 +108,7 @@ Example configuration for WireGuard interfaces: **Node 2** -.. code-block:: console +.. code-block:: none set interfaces wireguard wg01 address 'fe80::216:3eff:fe0a:7ada/64' set interfaces wireguard wg01 address '192.168.0.2/24' @@ -123,7 +123,7 @@ Example configuration for WireGuard interfaces: **Status** -.. code-block:: console +.. code-block:: none vyos@ospf01:~$ sh ipv6 ospfv3 neighbor Neighbor ID Pri DeadTime State/IfState Duration I/F[State] |