diff options
Diffstat (limited to 'docs/services/lldp.rst')
| -rw-r--r-- | docs/services/lldp.rst | 103 |
1 files changed, 51 insertions, 52 deletions
diff --git a/docs/services/lldp.rst b/docs/services/lldp.rst index da52adb0..4b1743e6 100644 --- a/docs/services/lldp.rst +++ b/docs/services/lldp.rst @@ -73,65 +73,64 @@ Operation Displays information about all neighbors discovered via LLDP. -.. code-block:: none + .. code-block:: none - vyos@vyos:~# show lldp neighbors - Capability Codes: R - Router, B - Bridge, W - Wlan r - Repeater, S - Station - D - Docsis, T - Telephone, O - Other + vyos@vyos:~$ show lldp neighbors + Capability Codes: R - Router, B - Bridge, W - Wlan r - Repeater, S - Station + D - Docsis, T - Telephone, O - Other - Device ID Local Proto Cap Platform Port ID - --------- ----- ----- --- -------- ------- - Switch0815 eth0 LLDP B Cisco IOS Software, Gi0/4 + Device ID Local Proto Cap Platform Port ID + --------- ----- ----- --- -------- ------- + BR2.vyos.net eth0 LLDP R VyOS 1.2.4 eth1 + BR3.vyos.net eth0 LLDP RB VyOS 1.2.4 eth2 + SW1.vyos.net eth0 LLDP B Cisco IOS Software GigabitEthernet0/6 .. opcmd:: show lldp neighbors detail Get detailed information about LLDP neighbors. -.. code-block:: none - - vyos@vyos:~# show lldp neighbors detail - ------------------------------------------------------------------------------- - LLDP neighbors: - ------------------------------------------------------------------------------- - Interface: eth0, via: LLDP, RID: 1, Time: 12 days, xxxx:xxxx:40 - Chassis: - ChassisID: mac 00:50:40:20:03:00 - SysName: Switch0815 - SysDescr: Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 15.0(2)SE11, RELEASE SOFTWARE (fc3) - Technical Support: http://www.cisco.com/techsupport - Copyright (c) 1986-2017 by Cisco Systems, Inc. - Compiled Sat 19-Aug-17 09:34 by prod_rel_team - MgmtIP: 192.0.2.201 - Capability: Bridge, on - Port: - PortID: ifname Gi0/4 - PortDescr: GigabitEthernet0/4 - TTL: 120 - PMD autoneg: supported: yes, enabled: yes - Adv: 10Base-T, HD: yes, FD: yes - Adv: 100Base-TX, HD: yes, FD: yes - Adv: 1000Base-T, HD: no, FD: yes - MAU oper type: 1000BaseTFD - Four-pair Category 5 UTP, full duplex mode - VLAN: 1, pvid: yes - LLDP-MED: - Device Type: Network Connectivity Device - Capability: Capabilities, yes - Capability: Policy, yes - Capability: Location, yes - Capability: Inventory, yes - LLDP-MED Network Policy for: Voice, Defined: no - Priority: Best effort - PCP: 0 - DSCP Value: 0 - LLDP-MED Network Policy for: Voice Signaling, Defined: no - Priority: Best effort - PCP: 0 - DSCP Value: 0 - Inventory: - Hardware Revision: WS-C2960G-8TC-L (PowerPC405):C0 - Software Revision: 15.0(2)SE11 - Manufacturer: Cisco Systems, Inc. - Model: WS-C2960G-8TC-L + .. code-block:: none + + vyos@vyos:~$ show lldp neighbors detail + ------------------------------------------------------------------------------- + LLDP neighbors: + ------------------------------------------------------------------------------- + Interface: eth0, via: LLDP, RID: 28, Time: 0 day, 00:24:33 + Chassis: + ChassisID: mac 00:53:00:01:02:c9 + SysName: BR2.vyos.net + SysDescr: VyOS 1.3-rolling-201912230217 + MgmtIP: 192.0.2.1 + MgmtIP: 2001:db8::ffff + Capability: Bridge, on + Capability: Router, on + Capability: Wlan, off + Capability: Station, off + Port: + PortID: mac 00:53:00:01:02:c9 + PortDescr: eth0 + TTL: 120 + PMD autoneg: supported: no, enabled: no + MAU oper type: 10GigBaseCX4 - X copper over 8 pair 100-Ohm balanced cable + VLAN: 201 eth0.201 + VLAN: 205 eth0.205 + LLDP-MED: + Device Type: Network Connectivity Device + Capability: Capabilities, yes + Capability: Policy, yes + Capability: Location, yes + Capability: MDI/PSE, yes + Capability: MDI/PD, yes + Capability: Inventory, yes + Inventory: + Hardware Revision: None + Software Revision: 4.19.89-amd64-vyos + Firmware Revision: 6.00 + Serial Number: VMware-42 1d 83 b9 fe c1 bd b2-7 + Manufacturer: VMware, Inc. + Model: VMware Virtual Platform + Asset ID: No Asset Tag + ------------------------------------------------------------------------------- .. opcmd:: show lldp neighbors interface <interface> |