diff options
Diffstat (limited to 'docs/services/pppoe-server.rst')
| -rw-r--r-- | docs/services/pppoe-server.rst | 56 |
1 files changed, 53 insertions, 3 deletions
diff --git a/docs/services/pppoe-server.rst b/docs/services/pppoe-server.rst index 1316898e..9c457af5 100644 --- a/docs/services/pppoe-server.rst +++ b/docs/services/pppoe-server.rst @@ -33,9 +33,10 @@ Connections can be locally checked via the command .. code-block:: sh show pppoe-server sessions - ifname | username | calling-sid | ip | type | comp | state | uptime - -------+----------+-------------------+------------+-------+------+--------+---------- - ppp0 | foo | 08:00:27:fa:3e:50 | 10.1.1.100 | pppoe | | active | 00:04:15 + ifname | username | ip | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes + -------+----------+------------+-------------------+-------------+--------+----------+----------+---------- + ppp0 | foo | 10.1.1.100 | 08:00:27:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B + To use a radius server, you need to switch to authentication mode radius and @@ -52,5 +53,54 @@ server configured, if you wish to achieve redundancy. RADIUS provides the IP addresses in the example above via Framed-IP-Address. +Bandwidth Shaping +================= + +Bandwidth rate limits can be set for local users or RADIUS based attributes. + +Local user setup +================ + +The rate-limit is set in kbit/sec. + +.. code-block:: sh + + set service pppoe-server access-concentrator 'ACN' + set service pppoe-server authentication local-users username foo password 'bar' + set service pppoe-server authentication local-users username foo rate-limit download '20480' + set service pppoe-server authentication local-users username foo rate-limit upload '10240' + set service pppoe-server authentication mode 'local' + set service pppoe-server client-ip-pool start '10.1.1.100' + set service pppoe-server client-ip-pool stop '10.1.1.111' + set service pppoe-server dns-servers server-1 '10.100.100.1' + set service pppoe-server dns-servers server-2 '10.100.200.1' + set service pppoe-server interface 'eth1' + set service pppoe-server local-ip '10.1.1.2' + + +Once the user is connected, the user session is using the set limits and can be displayed via 'show pppoe-server sessions'. + +.. code-block:: sh + + show pppoe-server sessions + ifname | username | ip | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes + -------+----------+------------+-------------------+-------------+--------+----------+----------+---------- + ppp0 | foo | 10.1.1.100 | 08:00:27:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B + + +RADIUS shaper setup +=================== + +The current attribute 'Filter-ID' is being used as default and can be setup within RADIUS: + +Filter-ID=2000/3000 (means 2000Kbit down-stream rate and 3000Kbit up-stream rate) + +The command below enables it, assuming the RADIUS connection has been setup and is working. + +.. code-block:: sh + + set service pppoe-server authentication radius-settings rate-limit enable + +Other attributes can be used, but they have to be in one of the dictionaries in /usr/share/accel-ppp/radius. .. _`accel-ppp`: https://accel-ppp.org/ |