diff options
Diffstat (limited to 'docs/services')
| -rw-r--r-- | docs/services/pppoe-server.rst | 39 |
1 files changed, 33 insertions, 6 deletions
diff --git a/docs/services/pppoe-server.rst b/docs/services/pppoe-server.rst index fa61eb14..f34d5fef 100644 --- a/docs/services/pppoe-server.rst +++ b/docs/services/pppoe-server.rst @@ -4,7 +4,7 @@ PPPoE server VyOS utilizes `accel-ppp`_ to provide PPPoE server functionality. It can be used with local authentication or a connected RADIUS server. -.. note:: Please be aware, due to an upstream bug, config changes/commits +.. note:: **Please be aware, due to an upstream bug, config changes/commits will restart the ppp daemon and will reset existing PPPoE connections from connected users, in order to become effective.** @@ -38,6 +38,33 @@ Connections can be locally checked via the command ppp0 | foo | 10.1.1.100 | 08:00:27:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B +Client IP address pools +======================= + +To automatically assign the client an IP address as tunnel endpoint, a client IP pool is needed. The source can be either RADIUS or a local suhbnet or IP range defintion. + +Once the local tunnel endpoint ``set service pppoe-server local-ip '10.1.1.2'`` has been defined, the client IP pool can be either defined as a range or as subnet using CIDR notation. +If the CIDR notation is used, multiple subnets can be setup which are used sequentially. + +**Client IP address via IP range defintion** + +.. code-block:: sh + + set service pppoe-server client-ip-pool start '10.1.1.100' + set service pppoe-server client-ip-pool stop '10.1.1.111' + + +**Client IP subnets via CIDR notation** + +.. code-block:: sh + + set service pppoe-server client-ip-pool subnet '10.1.1.0/24' + set service pppoe-server client-ip-pool subnet '10.1.2.0/24' + set service pppoe-server client-ip-pool subnet '10.1.3.0/24' + + + +**RADIUS based IP pools (Framed-IP-Address)** To use a radius server, you need to switch to authentication mode radius and of course need to specify an IP for the server. You can have multiple RADIUS @@ -54,12 +81,12 @@ server configured, if you wish to achieve redundancy. RADIUS provides the IP addresses in the example above via Framed-IP-Address. Bandwidth Shaping -================= +^^^^^^^^^^^^^^^^^ Bandwidth rate limits can be set for local users or RADIUS based attributes. -Local user setup -================ +Bandwidth Shaping for local users +================================= The rate-limit is set in kbit/sec. @@ -88,8 +115,8 @@ Once the user is connected, the user session is using the set limits and can be ppp0 | foo | 10.1.1.100 | 08:00:27:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B -RADIUS shaper setup -=================== +RADIUS based shaper setup +========================= The current attribute 'Filter-Id' is being used as default and can be setup within RADIUS: |