diff options
Diffstat (limited to 'docs/vpn')
| -rw-r--r-- | docs/vpn/wireguard.rst | 15 |
1 files changed, 7 insertions, 8 deletions
diff --git a/docs/vpn/wireguard.rst b/docs/vpn/wireguard.rst index 9b3d36f4..bb0b8880 100644 --- a/docs/vpn/wireguard.rst +++ b/docs/vpn/wireguard.rst @@ -35,7 +35,7 @@ peer will encrypt all traffic to your system using this public key. .. code-block:: none - vyos@vyos:~$ show wireguard keypairs pubkey default + vyos@vyos:~$ show wireguard keypairs pubkey default hW17UxY7zeydJNPIyo3UtGnBHkzTK/NeBOrDSIU9Tx0= @@ -61,7 +61,7 @@ Interface configuration The next step is to configure your local side as well as the policy based trusted destination addresses. If you only initiate a connection, -the listen port and endpoint is optional, if you however act as a server +the listen port and address/port is optional, if you however act as a server and endpoints initiate the connections to your system, you need to define a port your clients can connect to, otherwise it's randomly chosen and may make it difficult with firewall rules, since the port may @@ -79,14 +79,12 @@ one. set interfaces wireguard wg01 address '10.1.0.1/24' set interfaces wireguard wg01 description 'VPN-to-wg02' set interfaces wireguard wg01 peer to-wg02 allowed-ips '10.2.0.0/24' - set interfaces wireguard wg01 peer to-wg02 endpoint '192.168.0.142:12345' + set interfaces wireguard wg01 peer to-wg02 address '192.168.0.142:12345' + set interfaces wireguard wg01 peer to-wg02 port '12345' set interfaces wireguard wg01 peer to-wg02 pubkey 'XMrlPykaxhdAAiSjhtPlvi30NVkvLQliQuKP7AI7CyI=' set interfaces wireguard wg01 port '12345' set protocols static interface-route 10.2.0.0/24 next-hop-interface wg01 -.. note:: The `endpoint` must be an IP and not a fully qualified domain - name (FQDN). Using a FQDN will result in unexpected behavior. - The last step is to define an interface route for 10.2.0.0/24 to get through the WireGuard interface `wg01`. Multiple IPs or networks can be defined and routed, the last check is allowed-ips which either prevents @@ -112,7 +110,8 @@ the public key, which needs to be shared with the peer. set interfaces wireguard wg01 address '10.2.0.1/24' set interfaces wireguard wg01 description 'VPN-to-wg01' set interfaces wireguard wg01 peer to-wg02 allowed-ips '10.1.0.0/24' - set interfaces wireguard wg01 peer to-wg02 endpoint '192.168.0.124:12345' + set interfaces wireguard wg01 peer to-wg02 address '192.168.0.124' + set interfaces wireguard wg01 peer to-wg02 port '12345' set interfaces wireguard wg01 peer to-wg02 pubkey 'u41jO3OF73Gq1WARMMFG7tOfk7+r8o8AzPxJ1FZRhzk=' set interfaces wireguard wg01 port '12345' set protocols static interface-route 10.1.0.0/24 next-hop-interface wg01 @@ -153,7 +152,7 @@ Road Warrior Example -------------------- With WireGuard, a Road Warrior VPN config is similar to a site-to-site -VPN. It just lacks the ``endpoint`` address. +VPN. It just lacks the ``address`` and ``port`` statements. In the following example, the IPs for the remote clients are defined in the peers. This would allow the peers to interact with one another. |