summaryrefslogtreecommitdiff
path: root/docs/vpn
diff options
context:
space:
mode:
Diffstat (limited to 'docs/vpn')
-rw-r--r--docs/vpn/dmvpn.rst12
-rw-r--r--docs/vpn/gre-ipsec.rst14
-rw-r--r--docs/vpn/l2tp.rst16
-rw-r--r--docs/vpn/openvpn.rst38
-rw-r--r--docs/vpn/pptp.rst6
-rw-r--r--docs/vpn/site2site_ipsec.rst12
-rw-r--r--docs/vpn/wireguard.rst26
7 files changed, 62 insertions, 62 deletions
diff --git a/docs/vpn/dmvpn.rst b/docs/vpn/dmvpn.rst
index aebbda97..9da6dde2 100644
--- a/docs/vpn/dmvpn.rst
+++ b/docs/vpn/dmvpn.rst
@@ -47,7 +47,7 @@ can be set to "0.0.0.0". If you do set the `remote-ip` directive at any point, t
HUB Configuration
^^^^^^^^^^^^^^^^^
-.. code-block:: console
+.. code-block:: none
interfaces
tunnel <tunN> {
@@ -119,7 +119,7 @@ HUB Configuration
HUB Example Configuration:
-.. code-block:: console
+.. code-block:: none
set interfaces ethernet eth0 address '198.51.100.41/30'
set interfaces ethernet eth1 address '192.168.1.1/24'
@@ -171,7 +171,7 @@ SPOKE Configuration
SPOKE1 Configuration:
-.. code-block:: console
+.. code-block:: none
interfaces
tunnel <tunN> {
@@ -248,7 +248,7 @@ SPOKE1 Configuration:
SPOKE1 Example Configuration
-.. code-block:: console
+.. code-block:: none
set interfaces ethernet eth0 address 'dhcp'
set interfaces ethernet eth1 address '192.168.2.1/24'
@@ -294,7 +294,7 @@ SPOKE1 Example Configuration
SPOKE2 Configuration
-.. code-block:: console
+.. code-block:: none
interfaces
tunnel <tunN> {
@@ -371,7 +371,7 @@ SPOKE2 Configuration
SPOKE2 Example Configuration
-.. code-block:: console
+.. code-block:: none
set interfaces ethernet eth0 address 'dhcp'
set interfaces ethernet eth1 address '192.168.3.1/24'
diff --git a/docs/vpn/gre-ipsec.rst b/docs/vpn/gre-ipsec.rst
index 3ca36b9f..38849f67 100644
--- a/docs/vpn/gre-ipsec.rst
+++ b/docs/vpn/gre-ipsec.rst
@@ -40,7 +40,7 @@ and the RIGHT router is 203.0.113.45
On the LEFT:
-.. code-block:: console
+.. code-block:: none
# GRE tunnel
set interfaces tunnel tun0 encapsulation gre
@@ -90,7 +90,7 @@ RIGHT router has a dynamic address on eth0.
On the LEFT:
-.. code-block:: console
+.. code-block:: none
set interfaces loopback lo address 192.168.99.1/32
@@ -101,7 +101,7 @@ On the LEFT:
On the RIGHT:
-.. code-block:: console
+.. code-block:: none
set interfaces loopback lo address 192.168.99.2/32
@@ -119,7 +119,7 @@ address, so we'll have to use RSA keys.
First, on both routers run the operational command "generate vpn rsa-key bits
2048". You may choose different length than 2048 of course.
-.. code-block:: console
+.. code-block:: none
vyos@left# run generate vpn rsa-key bits 2048
Generating rsa-key to /config/ipsec.d/rsa-keys/localhost.key
@@ -131,7 +131,7 @@ First, on both routers run the operational command "generate vpn rsa-key bits
Then on the opposite router, add the RSA key to your config.
-.. code-block:: console
+.. code-block:: none
set vpn rsa-keys rsa-key-name LEFT rsa-key KEYGOESHERE
@@ -140,7 +140,7 @@ for the peer on the dynamic side.
On the LEFT (static address):
-.. code-block:: console
+.. code-block:: none
set vpn rsa-keys rsa-key-name RIGHT rsa-key <PUBLIC KEY FROM THE RIGHT>
@@ -165,7 +165,7 @@ On the LEFT (static address):
On the RIGHT (dynamic address):
-.. code-block:: console
+.. code-block:: none
set vpn rsa-keys rsa-key-name LEFT rsa-key <PUBLIC KEY FROM THE LEFT>
diff --git a/docs/vpn/l2tp.rst b/docs/vpn/l2tp.rst
index 3d1a5ee7..a91399e2 100644
--- a/docs/vpn/l2tp.rst
+++ b/docs/vpn/l2tp.rst
@@ -6,7 +6,7 @@ L2TP over IPsec
Example for configuring a simple L2TP over IPsec VPN for remote access (works
with native Windows and Mac VPN clients):
-.. code-block:: console
+.. code-block:: none
set vpn ipsec ipsec-interfaces interface eth0
set vpn ipsec nat-traversal enable
@@ -36,7 +36,7 @@ for NAT-traversal:
Example:
-.. code-block:: console
+.. code-block:: none
set firewall name OUTSIDE-LOCAL rule 40 action 'accept'
set firewall name OUTSIDE-LOCAL rule 40 destination port '50'
@@ -55,7 +55,7 @@ Example:
Also note that if you wish to allow the VPN to be used for external access you
will need to add the appropriate source NAT rules to your configuration.
-.. code-block:: console
+.. code-block:: none
set nat source rule 110 outbound-interface 'eth0'
set nat source rule 110 source address '192.168.255.0/24'
@@ -64,7 +64,7 @@ will need to add the appropriate source NAT rules to your configuration.
To be able to resolve when connected to the VPN, the following DNS rules are
needed as well.
-.. code-block:: console
+.. code-block:: none
set vpn l2tp remote-access dns-servers server-1 '8.8.8.8'
set vpn l2tp remote-access dns-servers server-2 '8.8.4.4'
@@ -75,7 +75,7 @@ needed as well.
Established sessions can be viewed using the **show vpn remote-access**
operational command.
-.. code-block:: console
+.. code-block:: none
vyos@vyos:~$ show vpn remote-access
Active remote access VPN sessions:
@@ -92,7 +92,7 @@ like RADIUS_ (FreeRADIUS_ or Microsoft `Network Policy Server`_, NPS) is used.
VyOS supports either `local` or `radius` user authentication:
-.. code-block:: console
+.. code-block:: none
set vpn l2tp remote-access authentication mode <local|radius>
@@ -100,7 +100,7 @@ In addition one or more RADIUS_ servers can be configured to server for user
authentication. This is done using the `radius server` and `radius server key`
nodes:
-.. code-block:: console
+.. code-block:: none
set vpn l2tp remote-access authentication radius server 1.1.1.1 key 'foo'
set vpn l2tp remote-access authentication radius server 2.2.2.2 key 'foo'
@@ -116,7 +116,7 @@ If you are using e.g. OSPF as IGP always the nearest interface facing the RADIUS
server is used. With VyOS 1.2 you can bind all outgoing RADIUS requests to a
single source IP e.g. the loopback interface.
-.. code-block:: console
+.. code-block:: none
set vpn l2tp remote-access authentication radius source-address 3.3.3.3
diff --git a/docs/vpn/openvpn.rst b/docs/vpn/openvpn.rst
index 764c991c..ce7dcc44 100644
--- a/docs/vpn/openvpn.rst
+++ b/docs/vpn/openvpn.rst
@@ -67,7 +67,7 @@ in our configuration.
Local Configuration:
-.. code-block:: console
+.. code-block:: none
set interfaces openvpn vtun1 mode site-to-site
set interfaces openvpn vtun1 protocol udp
@@ -81,7 +81,7 @@ Local Configuration:
Remote Configuration:
-.. code-block:: console
+.. code-block:: none
set interfaces openvpn vtun1 mode site-to-site
set interfaces openvpn vtun1 protocol udp
@@ -99,7 +99,7 @@ weak, but a number of other encryption and hashing algorithms are available:
For Encryption:
-.. code-block:: console
+.. code-block:: none
vyos@vyos# set interfaces openvpn vtun1 encryption
Possible completions:
@@ -113,7 +113,7 @@ For Encryption:
For Hashing:
-.. code-block:: console
+.. code-block:: none
vyos@vyos# set interfaces openvpn vtun1 hash
Possible completions:
@@ -132,13 +132,13 @@ network of 10.1.0.0/16:
Local Configuration:
-.. code-block:: console
+.. code-block:: none
set protocols static interface-route 10.1.0.0/16 next-hop-interface vtun1
Remote Configuration:
-.. code-block:: console
+.. code-block:: none
set protocols static interface-route 10.0.0.0/16 next-hop-interface vtun1
@@ -179,7 +179,7 @@ closing on connection resets or daemon reloads.
.. note:: Using **openvpn-option -reneg-sec** can be tricky. This option is used to renegotiate data channel after n seconds. When used at both server and client, the lower value will trigger the renegotiation. If you set it to 0 on one side of the connection (to disable it), the chosen value on the other side will determine when the renegotiation will occur.
-.. code-block:: console
+.. code-block:: none
set interfaces openvpn vtun10 mode server
set interfaces openvpn vtun10 local-port 1194
@@ -189,7 +189,7 @@ closing on connection resets or daemon reloads.
Then we need to specify the location of the cryptographic materials. Suppose
you keep the files in `/config/auth/openvpn`
-.. code-block:: console
+.. code-block:: none
set interfaces openvpn vtun10 tls ca-cert-file /config/auth/openvpn/ca.crt
set interfaces openvpn vtun10 tls cert-file /config/auth/openvpn/server.crt
@@ -202,7 +202,7 @@ specify the subnet for client tunnel endpoints. Since we want clients to access
a specific network behind out router, we will use a push-route option for
installing that route on clients.
-.. code-block:: console
+.. code-block:: none
set interfaces openvpn vtun10 server push-route 192.168.0.0/16
set interfaces openvpn vtun10 server subnet 10.23.1.0/24
@@ -214,7 +214,7 @@ need configuration for each client to achieve this.
.. note:: Clients are identified by the CN field of their x.509 certificates,
in this example the CN is ``client0``:
-.. code-block:: console
+.. code-block:: none
set interfaces openvpn vtun10 server client client0 ip 10.23.1.10
set interfaces openvpn vtun10 server client client0 subnet 10.23.2.0/25
@@ -223,7 +223,7 @@ OpenVPN **will not** automatically create routes in the kernel for client
subnets when they connect and will only use client-subnet association
internally, so we need to create a route to the 10.23.0.0/20 network ourselves:
-.. code-block:: console
+.. code-block:: none
set protocols static interface-route 10.23.0.0/20 next-hop-interface vtun10
@@ -242,13 +242,13 @@ Authentication is done by using the ``openvpn-auth-ldap.so`` plugin which is
shipped with every VyOS installation. A dedicated configuration file is required.
It is best practise to store it in ``/config`` to survive image updates
-.. code-block:: console
+.. code-block:: none
set interfaces openvpn vtun0 openvpn-option "--plugin /usr/lib/openvpn/openvpn-auth-ldap.so /config/auth/ldap-auth.config"
The required config file may look like:
-.. code-block:: console
+.. code-block:: none
<LDAP>
# LDAP server URL
@@ -275,7 +275,7 @@ Active Directory
Despite the fact that AD is a superset of LDAP
-.. code-block:: console
+.. code-block:: none
<LDAP>
# LDAP server URL
@@ -309,7 +309,7 @@ Despite the fact that AD is a superset of LDAP
If you only want to check if the user account is enabled and can authenticate
(against the primary group) the following snipped is sufficient:
-.. code-block:: console
+.. code-block:: none
<LDAP>
URL ldap://dc01.example.com
@@ -328,7 +328,7 @@ If you only want to check if the user account is enabled and can authenticate
A complete LDAP auth OpenVPN configuration could look like the following example:
-.. code-block:: console
+.. code-block:: none
vyos@vyos# show interfaces openvpn
openvpn vtun0 {
@@ -372,7 +372,7 @@ using their CN attribute in the SSL certificate.
Server
******
-.. code-block:: console
+.. code-block:: none
set interfaces openvpn vtun10 encryption 'aes256'
set interfaces openvpn vtun10 hash 'sha512'
@@ -396,7 +396,7 @@ Server
Client
******
-.. code-block:: console
+.. code-block:: none
set interfaces openvpn vtun10 encryption 'aes256'
set interfaces openvpn vtun10 hash 'sha512'
@@ -420,7 +420,7 @@ all users can benefit from it.
If you are a hacker or want to try on your own we support passing raw OpenVPN
options to OpenVPN.
-.. code-block:: console
+.. code-block:: none
set interfaces openvpn vtun10 openvpn-option 'persistent-key'
diff --git a/docs/vpn/pptp.rst b/docs/vpn/pptp.rst
index 68ded675..72b3feb0 100644
--- a/docs/vpn/pptp.rst
+++ b/docs/vpn/pptp.rst
@@ -12,7 +12,7 @@ If no gateway-address is set within the configuration, the lowest IP out of the
server example
^^^^^^^^^^^^^^
-.. code-block:: console
+.. code-block:: none
set vpn pptp remote-access authentication local-users username test password 'test'
set vpn pptp remote-access authentication mode 'local'
@@ -28,7 +28,7 @@ client example (debian 9)
Install the client software via apt and execute pptpsetup to generate the configuration.
-.. code-block:: console
+.. code-block:: none
apt-get install pptp-linux
pptpsetup --create TESTTUNNEL --server 10.1.1.120 --username test --password test --encrypt
@@ -39,7 +39,7 @@ The command pon TESTUNNEL establishes the PPTP tunnel to the remote system.
All tunnel sessions can be checked via:
-.. code-block:: console
+.. code-block:: none
run sh pptp-server sessions
ifname | username | calling-sid | ip | type | comp | state | uptime
diff --git a/docs/vpn/site2site_ipsec.rst b/docs/vpn/site2site_ipsec.rst
index 6cbb56c9..bdafd6ce 100644
--- a/docs/vpn/site2site_ipsec.rst
+++ b/docs/vpn/site2site_ipsec.rst
@@ -116,7 +116,7 @@ Example:
* right subnet: `10.0.0.0/24` site2,remote office side
* right local_ip: `203.0.113.2` # remote office side WAN IP
-.. code-block:: console
+.. code-block:: none
# server config
set vpn ipsec esp-group office-srv-esp compression 'disable'
@@ -166,7 +166,7 @@ Example:
Show status of new setup:
-.. code-block:: console
+.. code-block:: none
vyos@srv-gw0:~$ show vpn ike sa
Peer ID / IP Local ID / IP
@@ -186,7 +186,7 @@ Show status of new setup:
If there is SNAT rules on eth1, need to add exclude rule
-.. code-block:: console
+.. code-block:: none
# server side
set nat source rule 10 destination address '10.0.0.0/24'
@@ -203,7 +203,7 @@ If there is SNAT rules on eth1, need to add exclude rule
To allow traffic to pass through to clients, you need to add the following
rules. (if you used the default configuration at the top of this page)
-.. code-block:: console
+.. code-block:: none
# server side
set firewall name OUTSIDE-LOCAL rule 32 action 'accept'
@@ -230,7 +230,7 @@ Imagine the following topology
**left**
-.. code-block:: console
+.. code-block:: none
set interfaces vti vti10 address '10.0.0.2/31'
@@ -264,7 +264,7 @@ Imagine the following topology
**right**
-.. code-block:: console
+.. code-block:: none
set interfaces vti vti10 address '10.0.0.3/31'
diff --git a/docs/vpn/wireguard.rst b/docs/vpn/wireguard.rst
index 1fc2e11f..82c38f69 100644
--- a/docs/vpn/wireguard.rst
+++ b/docs/vpn/wireguard.rst
@@ -21,7 +21,7 @@ within VyOS.
It will be used per default on any configured wireguard interface, even if
multiple interfaces are being configured.
-.. code-block:: console
+.. code-block:: none
wg01:~$ configure
wg01# run generate wireguard keypair
@@ -29,7 +29,7 @@ multiple interfaces are being configured.
The public key is being shared with your peer(s), your peer will encrypt all
traffic to your system using this public key.
-.. code-block:: console
+.. code-block:: none
wg01# run show wireguard pubkey
u41jO3OF73Gq1WARMMFG7tOfk7+r8o8AzPxJ1FZRhzk=
@@ -45,7 +45,7 @@ their own keypairs.
The commands below will generate 2 keypairs, which are not related
to each other.
-.. code-block:: console
+.. code-block:: none
wg01:~$ configure
wg01# run generate wireguard named-keypairs KP01
@@ -69,7 +69,7 @@ below is always the public key from your peer, not your local one.
**local side**
-.. code-block:: console
+.. code-block:: none
set interfaces wireguard wg01 address '10.1.0.1/24'
set interfaces wireguard wg01 description 'VPN-to-wg02'
@@ -89,7 +89,7 @@ traffic.
To use a named key on an interface, the option private-key needs to be set.
-.. code-block:: console
+.. code-block:: none
set interfaces wireguard wg01 private-key KP01
set interfaces wireguard wg02 private-key KP02
@@ -100,7 +100,7 @@ which needs to be shared with the peer.
**remote side**
-.. code-block:: console
+.. code-block:: none
set interfaces wireguard wg01 address '10.2.0.1/24'
set interfaces wireguard wg01 description 'VPN-to-wg01'
@@ -113,7 +113,7 @@ which needs to be shared with the peer.
Assure that your firewall rules allow the traffic, in which case you have a
working VPN using wireguard.
-.. code-block:: console
+.. code-block:: none
wg01# ping 10.2.0.1
PING 10.2.0.1 (10.2.0.1) 56(84) bytes of data.
@@ -128,7 +128,7 @@ working VPN using wireguard.
An additional layer of symmetric-key crypto can be used on top of the
asymmetric crypto, which is optional.
-.. code-block:: console
+.. code-block:: none
wg01# run generate wireguard preshared-key
rvVDOoc2IYEnV+k5p7TNAmHBMEGTHbPU8Qqg8c/sUqc=
@@ -137,7 +137,7 @@ Copy the key, as it is not stored on the local file system. Make sure you
distribute that key in a safe manner, it's a symmetric key, so only you and
your peer should have knowledge of its content.
-.. code-block:: console
+.. code-block:: none
wg01# set interfaces wireguard wg01 peer to-wg02 preshared-key 'rvVDOoc2IYEnV+k5p7TNAmHBMEGTHbPU8Qqg8c/sUqc='
wg02# set interfaces wireguard wg01 peer to-wg01 preshared-key 'rvVDOoc2IYEnV+k5p7TNAmHBMEGTHbPU8Qqg8c/sUqc='
@@ -147,7 +147,7 @@ Operational commands
**Show interface status**
-.. code-block:: console
+.. code-block:: none
vyos@wg01# run show interfaces wireguard wg01
@@ -164,14 +164,14 @@ Operational commands
**Show public key of the default key**
-.. code-block:: console
+.. code-block:: none
vyos@wg01# run show wireguard keypair pubkey default
FAXCPb6EbTlSH5200J5zTopt9AYXneBthAySPBLbZwM=
**Show public key of a named key**
-.. code-block:: console
+.. code-block:: none
vyos@wg01# run show wireguard keypair pubkey KP01
HUtsu198toEnm1poGoRTyqkUKfKUdyh54f45dtcahDM=
@@ -179,7 +179,7 @@ Operational commands
**Delete wireguard keypairs**
-.. code-block:: console
+.. code-block:: none
vyos@wg01# wireguard keypair default
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 17:03:55 +0000