diff options
Diffstat (limited to 'docs/vrf.rst')
| -rw-r--r-- | docs/vrf.rst | 128 |
1 files changed, 128 insertions, 0 deletions
diff --git a/docs/vrf.rst b/docs/vrf.rst index 00942234..3eb87e8a 100644 --- a/docs/vrf.rst +++ b/docs/vrf.rst @@ -39,6 +39,134 @@ then enslaved to a VRF device. TCP & UDP services running in the default VRF context (ie., not bound to any VRF device) can work across all VRF domains by enabling this option. +Interfaces +---------- + +Routing +------- + +Static +^^^^^^ + +Static routes are manually configured routes, which, in general, cannot be +updated dynamically from information VyOS learns about the network topology from +other routing protocols. However, if a link fails, the router will remove +routes, including static routes, from the :abbr:`RIPB (Routing Information +Base)` that used this interface to reach the next hop. In general, static +routes should only be used for very simple network topologies, or to override +the behavior of a dynamic routing protocol for a small number of routes. The +collection of all routes the router has learned from its configuration or from +its dynamic routing protocols is stored in the RIB. Unicast routes are directly +used to determine the forwarding table used for unicast packet forwarding. + +Static Routes +""""""""""""" + +.. cfgcmd:: set protocols vrf <name> static route <subnet> next-hop <address> + + Configure next-hop `<address>` for an IPv4 static route in the VRF identified + by `<name>`. Multiple static routes can be created. + +.. cfgcmd:: set protocols vrf <name> static route <subnet> next-hop <address> disable + + Disable IPv4 static route entry in the VRF identified by `<name>` + +.. cfgcmd:: set protocols vrf <name> static route <subnet> next-hop <address> distance <distance> + + Defines next-hop distance for this route, routes with smaller administrative + distance are elected prior those with a higher distance. + + Range is 1 to 255, default is 1. + +.. cfgcmd:: set protocols vrf <name> static route6 <subnet> next-hop <address> + + Configure next-hop `<address>` for an IPv6 static route in the VRF identified + by `<name>`. Multiple IPv6 static routes can be created. + +.. cfgcmd:: set protocols vrf <name> static route6 <subnet> next-hop <address> disable + + Disable IPv6 static route entry in the VRF identified by `<name>`. + +.. cfgcmd:: set protocols vrf <name> static route6 <subnet> next-hop <address> distance <distance> + + Defines next-hop distance for this route, routes with smaller administrative + distance are elected prior those with a higher distance. + + Range is 1 to 255, default is 1. + +.. note:: Routes with a distance of 255 are effectively disabled and not + installed into the kernel. + + +Interface Routes +"""""""""""""""" + +.. cfgcmd:: set protocols vrf <name> static interface-route <subnet> next-hop-interface <interface> + + Allows you to configure the next-hop interface for an interface-based IPv4 + static route. `<interface>` will be the next-hop interface where trafic is + routed for the given `<subnet>`. + +.. cfgcmd:: set protocols vrf <name> static interface-route <subnet> next-hop-interface <interface> disable + + Disables interface-based IPv4 static route. + +.. cfgcmd:: set protocols vrf <name> static interface-route <subnet> next-hop-interface <interface> distance <distance> + + Defines next-hop distance for this route, routes with smaller administrative + distance are elected prior those with a higher distance. + + Range is 1 to 255, default is 1. + +.. cfgcmd:: set protocols vrf <name> static interface-route6 <subnet> next-hop-interface <interface> + + Allows you to configure the next-hop interface for an interface-based IPv6 + static route. `<interface>` will be the next-hop interface where trafic is + routed for the given `<subnet>`. + +.. cfgcmd:: set protocols vrf <name> static interface-route6 <subnet> next-hop-interface <interface> disable + + Disables interface-based IPv6 static route. + +.. cfgcmd:: set protocols vrf <name> static interface-route6 <subnet> next-hop-interface <interface> distance <distance> + + Defines next-hop distance for this route, routes with smaller administrative + distance are elected prior those with a higher distance. + + Range is 1 to 255, default is 1. + + +Blackhole +""""""""" + +.. cfgcmd:: set protocols vrf <name> static route <subnet> blackhole + + Use this command to configure a "black-hole" route on the router. A + black-hole route is a route for which the system silently discard packets + that are matched. This prevents networks leaking out public interfaces, but + it does not prevent them from being used as a more specific route inside your + network. + +.. cfgcmd:: set protocols vrf <name> static route <subnet> blackhole distance <distance> + + Defines blackhole distance for this route, routes with smaller administrative + distance are elected prior those with a higher distance. + +.. cfgcmd:: set protocols vrf <name> static route6 <subnet> blackhole + + Use this command to configure a "black-hole" route on the router. A + black-hole route is a route for which the system silently discard packets + that are matched. This prevents networks leaking out public interfaces, but + it does not prevent them from being used as a more specific route inside your + network. + +.. cfgcmd:: set protocols vrf <name> static route6 <subnet> blackhole distance <distance> + + Defines blackhole distance for this route, routes with smaller administrative + distance are elected prior those with a higher distance. + + + Operation ========= |