diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/configuration/interfaces/bridge.rst | 30 |
1 files changed, 21 insertions, 9 deletions
diff --git a/docs/configuration/interfaces/bridge.rst b/docs/configuration/interfaces/bridge.rst index 17e3d50b..c53d6f51 100644 --- a/docs/configuration/interfaces/bridge.rst +++ b/docs/configuration/interfaces/bridge.rst @@ -116,6 +116,16 @@ links providing fault tolerance if an active link fails. VLAN ==== +.. note:: It is not valid to use the `vif 1` option for VLAN aware bridges + because VLAN aware bridges assume that all unlabeled packets belong to + the default VLAN 1 member and that the VLAN ID of the bridge's parent + interface is always 1 + +.. cfgcmd:: set interfaces bridge <interface> enable-vlan + + To activate the VLAN aware bridge, you must activate this setting to use VLAN + settings for the bridge + .. cmdinclude:: /_include/interface-vlan-8021q.txt :var0: bridge :var1: br0 @@ -160,9 +170,9 @@ Port Mirror (SPAN) :var1: br1 :var2: eth3 -******* -Example -******* +****************************** +Example: Create a basic bridge +****************************** Creating a bridge interface is very simple. In this example we will have: @@ -195,9 +205,9 @@ This results in the active configuration: } stp -******* -Example -******* +********************************* +Example: Using VLAN aware Bridge +********************************* An example of creating a VLAN-aware bridge is as follows: @@ -209,6 +219,7 @@ An example of creating a VLAN-aware bridge is as follows: .. code-block:: none + set interfaces bridge br100 enable-vlan set interfaces bridge br100 member interface eth1 allowed-vlan 10 set interfaces bridge br100 member interface eth2 native-vlan 10 set interfaces bridge br100 vif 10 address 192.0.2.1/24 @@ -220,6 +231,7 @@ This results in the active configuration: .. code-block:: none vyos@vyos# show interfaces bridge br100 + enable-vlan member { interface eth1 { allowed-vlan 10 @@ -234,9 +246,9 @@ This results in the active configuration: address 2001:db8::ffff/64 } -******* -Example -******* +******************************************************************** +Example: Using the operation mode command to view Bridge Information +******************************************************************** .. opcmd:: show bridge |