7 files changed, 116 insertions, 30 deletions
diff --git a/docs/_include/vyos-1x b/docs/_include/vyos-1x
-Subproject 2f4466802d5448ecee59009686ed7c49c6a392d
+Subproject f4d736112b64933c1849d16072575f665ca9f4c
diff --git a/docs/changelog/1.3.rst b/docs/changelog/1.3.rst
index f32d910d..179d3d96 100644
--- a/docs/changelog/1.3.rst
+++ b/docs/changelog/1.3.rst
@@ -8,6 +8,65 @@
    _ext/releasenotes.py
 
 
+2021-10-10
+==========
+
+* :vytask:`T3750` (bug): pdns-recursor 4.4 issue with dont-query and private DNS servers
+* :vytask:`T3885` (default): dhcpv6-pd: randomly generated DUID is not persisted
+* :vytask:`T3899` (enhancment): Add support for hd44780 LCD displays
+
+
+2021-10-09
+==========
+
+* :vytask:`T3894` (bug): Tunnel Commit Failed if system does not have `eth0`
+
+
+2021-10-08
+==========
+
+* :vytask:`T3893` (bug): MGRE Tunnel commit crash If sit tunnel available
+
+
+2021-10-04
+==========
+
+* :vytask:`T3888` (bug): Incorrect warning when poweroff command executed from configure mode.
+* :vytask:`T3890` (feature): dhcp(v6): provide op-mode commands to retrieve both server and client logfiles
+* :vytask:`T3889` (feature): Migrate to journalctl when reading daemon logs
+
+
+2021-10-03
+==========
+
+* :vytask:`T3880` (bug): EFI boot shows error on display
+
+
+2021-10-02
+==========
+
+* :vytask:`T3882` (feature): Upgrade PowerDNs recursor to 4.5 series
+* :vytask:`T3883` (bug): VRF - Delette vrf config on interface
+
+
+2021-10-01
+==========
+
+* :vytask:`T3877` (bug): VRRP always enabled rfc3768-compatibility even when not specified
+
+
+2021-09-30
+==========
+
+* :vytask:`T3874` (bug): D-Link Ethernet Interface not working.
+
+
+2021-09-27
+==========
+
+* :vytask:`T3858` (bug): Deleting OSPFv3 process yields: Unknown command: no router-id
+
+
 2021-09-26
 ==========
 
@@ -107,7 +166,6 @@
 * :vytask:`T3788` (bug): Keys are not allowed with ipip and sit tunnels
 * :vytask:`T3683` (bug): VXLAN not accept ipv6 and source-interface options and mtu bug
 * :vytask:`T3634` (feature): Add op command option for ping for do not fragment bit to be set
-* :vytask:`T690` (feature): Allow OpenVPN servers to push routes with custom metric values
 
 
 2021-09-02
@@ -334,7 +392,6 @@
 * :vytask:`T2328` (default): dhcpv6 server not starting (disable check reversed?)
 * :vytask:`T1758` (default): Switch vyos.config to libvyosconfig
 * :vytask:`T954` (bug): Using the 10.255.255.0/24 subnet on other interfaces breaks L2TP/IPSec
-* :vytask:`T1187` (bug): Command show log vpn display wrong information  
 
 
 2021-07-23
@@ -876,7 +933,7 @@
 2021-02-16
 ==========
 
-* :vytask:`T3318` (feature): Update Linux Kernel to v5.4.143 / 5.10.61
+* :vytask:`T3318` (feature): Update Linux Kernel to v5.4.152 / 5.10.72
 
 
 2021-02-14
@@ -1754,7 +1811,6 @@
 * :vytask:`T2814` (default): kernel 5.1+ : NAT : module `nft_chain_nat_ipv4` renamed
 * :vytask:`T2839` (feature): Upgrade WireGuard user-space tools and Kernel module
 * :vytask:`T2842` (feature): Replace custom "wireguard, wireguard-tools" package with debian-backports version
-* :vytask:`T1205` (bug): module pcspkr missing
 
 
 2020-08-29
@@ -1887,7 +1943,6 @@
 
 * :vytask:`T2758` (bug): router-advert: 'infinity' is not a valid integer number
 * :vytask:`T2637` (bug): Vlan is not removed from the system
-* :vytask:`T1194` (bug): cronjob is being setup even if not saved
 * :vytask:`T1287` (bug): No DHCPv6 leases reported for "show dhcpv6 client leases"
 
 
@@ -1935,7 +1990,6 @@
 ==========
 
 * :vytask:`T2743` (feature): WireGuard: move key migration from config script to migration script
-* :vytask:`T1241` (bug): Remove of policy route throws CLI error
 * :vytask:`T2742` (feature): mDNS repeater: migrate to get_config_dict()
 
 
@@ -1950,7 +2004,7 @@
 ==========
 
 * :vytask:`T2729` (feature): Pseudo-ethernet replace fail message
-* :vytask:`T1249` (feature): multiply PBR rules can set to a single interface
+* :vytask:`T1249` (feature): multiple PBR rules can set to a single interface
 * :vytask:`T1956` (feature): PPPoE server: support PADO-delay
 * :vytask:`T1295` (feature): FRR: update documentation 
 * :vytask:`T1222` (bug): OSPF routing problem - route looping
@@ -2401,7 +2455,7 @@
 
 * :vytask:`T2481` (feature): WireGuard: support tunnel via IPv6 underlay
 * :vytask:`T421` (bug): Add Pv6 prefix delegation support
-* :vytask:`T815` (feature): Add DHCPv6 prefix-delegation support
+* :vytask:`T815` (feature): Add DHCPv6 server prefix-delegation support
 
 
 2020-05-17
@@ -3591,7 +3645,7 @@
 ==========
 
 * :vytask:`T1617` (default): OpenVPN push route failure
-* :vytask:`T1250` (bug): FRR not setting default gateway from dhcp
+* :vytask:`T1250` (bug): FRR not setting default gateway from DHCP
 
 
 2019-08-26
@@ -3961,5 +4015,4 @@
 2019-02-09
 ==========
 
-* :vytask:`T1236` (feature): Update Linux Kernel to 4.19.20
-* :vytask:`T1238` (bug): Wireguard allows invalid IP's
+* :vytask:`T1236` (feature): Update Linux Kernel
diff --git a/docs/configuration/interfaces/openvpn.rst b/docs/configuration/interfaces/openvpn.rst
index 82dd26dd..80fef754 100644
--- a/docs/configuration/interfaces/openvpn.rst
+++ b/docs/configuration/interfaces/openvpn.rst
@@ -34,8 +34,9 @@ In the VyOS CLI, a key point often overlooked is that rather than being
 configured using the `set vpn` stanza, OpenVPN is configured as a network
 interface using `set interfaces openvpn`.
 
+************
 Site-To-Site
-============
+************
 
 .. figure:: /_static/images/openvpn_site2site_diagram.jpg
 
@@ -130,9 +131,9 @@ Remote Configuration - Annotated:
   set interfaces openvpn vtun1 local-address '10.255.1.2'                          # Local IP of vtun interface
   set interfaces openvpn vtun1 remote-address '10.255.1.1'                         # Remote IP of vtun interface
 
-*******************
+
 Firewall Exceptions
-*******************
+===================
 
 For the OpenVPN traffic to pass through the WAN interface, you must create a
 firewall exception.
@@ -245,8 +246,9 @@ to each tunnel. Another option is to dedicate a port number to each tunnel
 OpenVPN status can be verified using the `show openvpn` operational commands.
 See the built-in help for a complete list of options.
 
+******
 Server
-======
+******
 
 Multi-client server is the most popular OpenVPN mode on routers. It always uses
 x.509 authentication and therefore requires a PKI setup. Refer this section
@@ -322,7 +324,7 @@ internally, so we need to create a route to the 10.23.0.0/20 network ourselves:
   set protocols static interface-route 10.23.0.0/20 next-hop-interface vtun10
 
 Generate X.509 Certificate and Keys
------------------------------------
+===================================
 
 OpenVPN ships with a set of scripts called Easy-RSA that can generate the
 appropriate files needed for an OpenVPN setup using X.509 certificates.
@@ -535,8 +537,10 @@ example:
        }
    }
 
+
+******
 Client
-======
+******
 
 VyOS can not only act as an OpenVPN site-to-site or server for multiple clients.
 You can indeed also configure any VyOS OpenVPN interface as an OpenVPN client
@@ -548,7 +552,7 @@ static client IP address to the OpenVPN client. Remember, clients are identified
 using their CN attribute in the SSL certificate.
 
 Server
-------
+======
 
 .. code-block:: none
 
@@ -572,7 +576,7 @@ Server
   set interfaces openvpn vtun10 use-lzo-compression
 
 Client
-------
+======
 
 .. code-block:: none
 
@@ -614,13 +618,14 @@ Will add ``push "keepalive 1 10"`` to the generated OpenVPN config file.
    quotes using the ``&quot;`` statement.
 
 
+***************
 Troubleshooting
-===============
+***************
 
 VyOS provides some operational commands on OpenVPN.
 
 Check status
-------------
+============
 
 The following commands let you check tunnel status.
 
@@ -639,7 +644,7 @@ The following commands let you check tunnel status.
 
 
 Reset OpenVPN
--------------
+=============
 
 The following commands let you reset OpenVPN.
 
diff --git a/docs/configuration/protocols/rip.rst b/docs/configuration/protocols/rip.rst
index 4d46e2f0..fd20a90c 100644
--- a/docs/configuration/protocols/rip.rst
+++ b/docs/configuration/protocols/rip.rst
@@ -1,3 +1,5 @@
+:lastproofread: 2021-10-04
+
 .. _rip:
 
 ###
@@ -57,20 +59,20 @@ Optional Configuration
 
 .. cfgcmd:: set protocols rip default-distance <distance>
 
-  This command change distance value of RIP. The distance range is 1 to 255.
+  This command change the distance value of RIP. The distance range is 1 to 255.
    
    .. note:: Routes with a distance of 255 are effectively disabled and not
       installed into the kernel.
 
 .. cfgcmd:: set protocols rip network-distance <A.B.C.D/M> distance <distance>
 
-  This command sets default RIP distance to specified value when the route’s
+  This command sets default RIP distance to a specified value when the routes
   source IP address matches the specified prefix.
   
 .. cfgcmd:: set protocols rip network-distance <A.B.C.D/M> access-list <name>
 
   This command can be used with previous command to sets default RIP distance
-  to specified value when the route’s source IP address matches the specified
+  to specified value when the route source IP address matches the specified
   prefix and the specified access-list.
 
 .. cfgcmd:: set protocols rip default-information originate
@@ -156,7 +158,7 @@ Redistribution Configuration
   This command modifies the default metric (hop count) value for redistributed
   routes. The metric range is 1 to 16. The default value is 1. This command
   does not affect connected route even if it is redistributed by
-  :cfgcmd:`redistribute connected`. To modify connected route’s metric
+  :cfgcmd:`redistribute connected`. To modify connected routes metric
   value, please use :cfgcmd:`redistribute connected metric`.
 
 
@@ -178,7 +180,7 @@ Interfaces Configuration
 
   This command disables split-horizon on the interface. By default, VyOS does
   not advertise RIP routes out the interface over which they were learned
-  (split horizon).
+  (split horizon).3
   
 .. cfgcmd:: set interfaces <inttype> <intname> ip rip split-horizon poison-reverse
 
diff --git a/docs/configuration/service/dhcp-server.rst b/docs/configuration/service/dhcp-server.rst
index c3f21b80..38f4d7fc 100644
--- a/docs/configuration/service/dhcp-server.rst
+++ b/docs/configuration/service/dhcp-server.rst
@@ -464,6 +464,30 @@ Option 43 for UniFI
 Operation Mode
 ==============
 
+.. opcmd:: show log dhcp server
+
+   Show DHCP server daemon log file
+
+.. opcmd:: show log dhcp client
+
+   Show logs from all DHCP client processes.
+
+.. opcmd:: show log dhcp client interface <interface>
+
+   Show logs from specific `interface` DHCP client process.
+
+.. opcmd:: show log dhcpv6 server
+
+   Show DHCPv6 server daemon log file
+
+.. opcmd:: show log dhcpv6 client
+
+   Show logs from all DHCPv6 client processes.
+
+.. opcmd:: show log dhcpv6 client interface <interface>
+
+   Show logs from specific `interface` DHCPv6 client process.
+
 .. opcmd:: restart dhcp server
 
    Restart the DHCP server
@@ -512,6 +536,8 @@ Operation Mode
    Show only leases with the specified state. Possible states: all, active,
    free, expired, released, abandoned, reset, backup (default = active)
 
+
+
 ***********
 IPv6 server
 ***********
diff --git a/docs/configuration/service/snmp.rst b/docs/configuration/service/snmp.rst
index e962c1c5..2a55b775 100644
--- a/docs/configuration/service/snmp.rst
+++ b/docs/configuration/service/snmp.rst
@@ -166,9 +166,9 @@ configuration. The resulting LCI config will look like:
 .. code-block:: none
 
   vyos@vyos# show service snmp
-   listen-address 172.18.254.201 {
+   listen-address 192.0.2.1 {
    }
-   location "Wuerzburg, Dr.-Georg-Fuchs-Str. 8"
+   location "VyOS Datacenter"
    v3 {
        engineid 000000000000000000000002
        group default {
diff --git a/docs/configuration/system/login.rst b/docs/configuration/system/login.rst
index bf26904e..61201de7 100644
--- a/docs/configuration/system/login.rst
+++ b/docs/configuration/system/login.rst
@@ -122,7 +122,7 @@ Dial-In User Service)` servers as backend for user authentication.
 Configuration
 -------------
 
-.. cfgcmd:: set system login radius server <address> secret <secret>
+.. cfgcmd:: set system login radius server <address> key <secret>
 
    Specify the `<address>` of the RADIUS server user with the pre-shared-secret
    given in `<secret>`. Multiple servers can be specified.