6 files changed, 48 insertions, 0 deletions
diff --git a/docs/_static/images/1u_vyos_front_10ge_open_1.jpg b/docs/_static/images/1u_vyos_front_10ge_open_1.jpg
new file mode 100644
index 00000000..edfba5a3
--- /dev/null
+++ b/docs/_static/images/1u_vyos_front_10ge_open_1.jpg
diff --git a/docs/_static/images/1u_vyos_front_10ge_open_2.jpg b/docs/_static/images/1u_vyos_front_10ge_open_2.jpg
new file mode 100644
index 00000000..4f48a116
--- /dev/null
+++ b/docs/_static/images/1u_vyos_front_10ge_open_2.jpg
diff --git a/docs/_static/images/1u_vyos_front_10ge_open_3.jpg b/docs/_static/images/1u_vyos_front_10ge_open_3.jpg
new file mode 100644
index 00000000..c102b903
--- /dev/null
+++ b/docs/_static/images/1u_vyos_front_10ge_open_3.jpg
diff --git a/docs/_static/images/1u_vyos_front_10ge_open_4.jpg b/docs/_static/images/1u_vyos_front_10ge_open_4.jpg
new file mode 100644
index 00000000..2f270b7e
--- /dev/null
+++ b/docs/_static/images/1u_vyos_front_10ge_open_4.jpg
diff --git a/docs/services/pppoe-server.rst b/docs/services/pppoe-server.rst
index f34d5fef..17aee82a 100644
--- a/docs/services/pppoe-server.rst
+++ b/docs/services/pppoe-server.rst
@@ -130,4 +130,36 @@ The command below enables it, assuming the RADIUS connection has been setup and
 
 Other attributes can be used, but they have to be in one of the dictionaries in /usr/share/accel-ppp/radius.
 
+
+Practical Configuration Examples
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Dual-stack provisioning with IPv6 PD via pppoe
+==============================================
+
+The example below covers a dual-stack configuration via pppoe-server.
+
+.. code-block:: sh
+
+  set service pppoe-server authentication local-users username test password 'test'
+  set service pppoe-server authentication mode 'local'
+  set service pppoe-server client-ip-pool start '192.168.0.1'
+  set service pppoe-server client-ip-pool stop '192.168.0.10'
+  set service pppoe-server client-ipv6-pool delegate-prefix '2001:db8:8003::1/48,56'
+  set service pppoe-server client-ipv6-pool prefix '2001:db8:8002::1/48,64'
+  set service pppoe-server dns-servers server-1 '8.8.8.8'
+  set service pppoe-server dnsv6-servers server-1 '2001:4860:4860::8888'
+  set service pppoe-server interface 'eth2'
+  set service pppoe-server local-ip '10.100.100.1'
+
+
+The client, once successfully authenticated, will receive an IPv4 and an IPv6 /64 address, to terminate the pppoe endpoint on the client side and a /56 subnet for the clients internal use.
+
+.. code-block:: sh
+
+  vyos@pppoe-server:~$ sh pppoe-server sessions 
+   ifname | username |     ip      |            ip6           |       ip6-dp        |    calling-sid    | rate-limit | state  |  uptime  | rx-bytes | tx-bytes 
+  --------+----------+-------------+--------------------------+---------------------+-------------------+------------+--------+----------+----------+----------
+   ppp0   | test     | 192.168.0.1 | 2001:db8:8002:0:200::/64 | 2001:db8:8003::1/56 | 08:00:27:12:42:eb |            | active | 00:00:49 | 875 B    | 2.1 KiB
+
 .. _`accel-ppp`: https://accel-ppp.org/
diff --git a/docs/vyos-on-baremetal.rst b/docs/vyos-on-baremetal.rst
index 7eae80ca..0c2868e7 100644
--- a/docs/vyos-on-baremetal.rst
+++ b/docs/vyos-on-baremetal.rst
@@ -51,3 +51,19 @@ Pictures
 .. figure:: /_static/images/1u_vyos_front_open_3.jpg
    :scale: 25 %
    :alt: CSE-505-203B Open 3
+
+.. figure:: /_static/images/1u_vyos_front_10ge_open_1.jpg
+   :scale: 25 %
+   :alt: CSE-505-203B w/ 10GE Open 1
+
+.. figure:: /_static/images/1u_vyos_front_10ge_open_2.jpg
+   :scale: 25 %
+   :alt: CSE-505-203B w/ 10GE Open 2
+
+.. figure:: /_static/images/1u_vyos_front_10ge_open_3.jpg
+   :scale: 25 %
+   :alt: CSE-505-203B w/ 10GE Open 3
+
+.. figure:: /_static/images/1u_vyos_front_10ge_open_4.jpg
+   :scale: 25 %
+   :alt: CSE-505-203B w/ 10GE Open