summaryrefslogtreecommitdiff
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/appendix/commandtree/configmode.rst8
-rw-r--r--docs/appendix/examples/dmvpn.rst10
-rw-r--r--docs/interfaces/addresses.rst2
-rw-r--r--docs/interfaces/bridge.rst2
-rw-r--r--docs/interfaces/ethernet.rst2
-rw-r--r--docs/interfaces/index.rst2
-rw-r--r--docs/interfaces/vlan.rst2
-rw-r--r--docs/interfaces/wireless.rst22
-rw-r--r--docs/routing/arp.rst8
-rw-r--r--docs/routing/routing-policy.rst8
-rw-r--r--docs/services/pppoe-server.rst6
11 files changed, 36 insertions, 36 deletions
diff --git a/docs/appendix/commandtree/configmode.rst b/docs/appendix/commandtree/configmode.rst
index 29dc43d0..f70fbb23 100644
--- a/docs/appendix/commandtree/configmode.rst
+++ b/docs/appendix/commandtree/configmode.rst
@@ -389,7 +389,7 @@ See here how to move the configuration entrys from vlanid 3 to 2
[edit interfaces ethernet eth1]
vyos@vyos# show
duplex auto
- hw-id 08:00:27:81:c6:59
+ hw-id 00:53:22:81:c6:59
smp-affinity auto
speed auto
vif 3 {
@@ -400,7 +400,7 @@ See here how to move the configuration entrys from vlanid 3 to 2
[edit interfaces ethernet eth1]
vyos@vyos# show
duplex auto
- hw-id 08:00:27:81:c6:59
+ hw-id 00:53:22:81:c6:59
smp-affinity auto
speed auto
+vif 2 {
@@ -488,7 +488,7 @@ Show the hole config, the address and description of eth1 is moving to vlan 2 if
ethernet eth0 {
address dhcp
duplex auto
- hw-id 08:00:27:2b:c0:0b
+ hw-id 00:53:22:2b:c0:0b
smp-affinity auto
speed auto
}
@@ -496,7 +496,7 @@ Show the hole config, the address and description of eth1 is moving to vlan 2 if
- address 10.1.1.1/32
- description "MGMT Interface"
duplex auto
- hw-id 08:00:27:81:c6:59
+ hw-id 00:53:22:81:c6:59
smp-affinity auto
speed auto
+ vif 2 {
diff --git a/docs/appendix/examples/dmvpn.rst b/docs/appendix/examples/dmvpn.rst
index 30ca8e86..cbb9f300 100644
--- a/docs/appendix/examples/dmvpn.rst
+++ b/docs/appendix/examples/dmvpn.rst
@@ -13,7 +13,7 @@ Configuration
set interfaces tunnel tun100 address '172.16.253.134/29'
set interfaces tunnel tun100 encapsulation 'gre'
- set interfaces tunnel tun100 local-ip '11.22.33.44'
+ set interfaces tunnel tun100 local-ip '203.0.113.44'
set interfaces tunnel tun100 multicast 'enable'
set interfaces tunnel tun100 parameters ip key '1'
@@ -69,7 +69,7 @@ Use this configuration on your Cisco device:
crypto pki token default removal timeout 0
crypto keyring DMVPN
- pre-shared-key address 1.2.3.4 key <secretkey>
+ pre-shared-key address 198.51.100.2 key <secretkey>
!
crypto isakmp policy 10
encr aes 256
@@ -80,7 +80,7 @@ Use this configuration on your Cisco device:
crypto isakmp keepalive 30 30 periodic
crypto isakmp profile DMVPN
keyring DMVPN
- match identity address 11.22.33.44 255.255.255.255
+ match identity address 203.0.113.44 255.255.255.255
!
crypto ipsec transform-set DMVPN-AES256 esp-aes 256 esp-sha-hmac
mode transport
@@ -95,8 +95,8 @@ Use this configuration on your Cisco device:
ip address 172.16.253.129 255.255.255.248
no ip redirects
ip nhrp authentication <nhrp secret key>
- ip nhrp map multicast 11.22.33.44
- ip nhrp map 172.16.253.134 11.22.33.44
+ ip nhrp map multicast 203.0.113.44
+ ip nhrp map 172.16.253.134 203.0.113.44
ip nhrp network-id 1
ip nhrp holdtime 600
ip nhrp nhs 172.16.253.134
diff --git a/docs/interfaces/addresses.rst b/docs/interfaces/addresses.rst
index 19ba8225..034fb0ef 100644
--- a/docs/interfaces/addresses.rst
+++ b/docs/interfaces/addresses.rst
@@ -32,7 +32,7 @@ The command is ``set interfaces $type $name address $address``. Examples:
set interfaces ethernet eth0 address 192.0.2.1/24
set interfaces tunnel tun0 address 10.0.0.1/30
set interfaces bridge br0 address 203.0.113.45/26
- set interfaces ethernet eth0 vif 30 address 192.0.30.254/24
+ set interfaces ethernet eth0 vif 30 address 198.51.100.254/24
DHCP
****
diff --git a/docs/interfaces/bridge.rst b/docs/interfaces/bridge.rst
index 2ae6a243..a7bbbca6 100644
--- a/docs/interfaces/bridge.rst
+++ b/docs/interfaces/bridge.rst
@@ -109,4 +109,4 @@ The MAC address-table for a bridge can be displayed using the
vyos@vyos:~$ show bridge br100 macs
port no mac addr is local? ageing timer
- 1 00:0c:29:44:3b:19 yes 0.00
+ 1 00:53:29:44:3b:19 yes 0.00
diff --git a/docs/interfaces/ethernet.rst b/docs/interfaces/ethernet.rst
index cbefbaf6..a8cee8c2 100644
--- a/docs/interfaces/ethernet.rst
+++ b/docs/interfaces/ethernet.rst
@@ -23,7 +23,7 @@ Resulting in:
address 2001:db8:1::ffff/64
description INSIDE
duplex auto
- hw-id 00:0c:29:44:3b:19
+ hw-id 00:53:29:44:3b:19
smp_affinity auto
speed auto
}
diff --git a/docs/interfaces/index.rst b/docs/interfaces/index.rst
index adcc7c71..0513adf1 100644
--- a/docs/interfaces/index.rst
+++ b/docs/interfaces/index.rst
@@ -25,7 +25,7 @@ command.
vyos@vyos:~$ show interfaces ethernet eth0
eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
- link/ether 00:0c:29:44:3b:0f brd ff:ff:ff:ff:ff:ff
+ link/ether 00:53:29:44:3b:0f brd ff:ff:ff:ff:ff:ff
inet 172.16.51.129/24 brd 172.16.51.255 scope global eth0
inet6 fe80::20c:29ff:fe44:3b0f/64 scope link
valid_lft forever preferred_lft forever
diff --git a/docs/interfaces/vlan.rst b/docs/interfaces/vlan.rst
index 82f73efe..55656d5d 100644
--- a/docs/interfaces/vlan.rst
+++ b/docs/interfaces/vlan.rst
@@ -45,7 +45,7 @@ Resulting in:
address 2001:db8:100::1/64
description INSIDE
duplex auto
- hw-id 00:0c:29:44:3b:19
+ hw-id 00:53:29:44:3b:19
smp_affinity auto
speed auto
vif 100 {
diff --git a/docs/interfaces/wireless.rst b/docs/interfaces/wireless.rst
index 8bd84364..9e3c6cf5 100644
--- a/docs/interfaces/wireless.rst
+++ b/docs/interfaces/wireless.rst
@@ -39,7 +39,7 @@ to as :abbr:`SSID (Service Set Identifier)`, and MAC addresses.
The WAP in this example has the following characteristics:
-* IP address ``192.0.2.1/24``
+* IP address ``192.168.2.1/24``
* Network ID (SSID) ``TEST``
* WPA passphrase ``12345678``
* Use 802.11n protocol
@@ -47,7 +47,7 @@ The WAP in this example has the following characteristics:
.. code-block:: none
- set interfaces wireless wlan0 address '192.0.2.1/24'
+ set interfaces wireless wlan0 address '192.168.2.1/24'
set interfaces wireless wlan0 type access-point
set interfaces wireless wlan0 channel 1
set interfaces wireless wlan0 mode n
@@ -63,7 +63,7 @@ Resulting in
interfaces {
[...]
wireless wlan0 {
- address 192.0.2.1/24
+ address 192.168.2.1/24
channel 1
mode n
security {
@@ -103,24 +103,24 @@ is responsible for authenticating the users.
The WAP in this example has the following characteristics:
-* IP address ``192.0.2.1/24``
+* IP address ``192.168.2.1/24``
* Network ID (SSID) ``Enterprise-TEST``
* WPA passphrase ``12345678``
* Use 802.11n protocol
* Wireless channel ``1``
-* RADIUS server at ``192.0.3.10`` with shared-secret ``VyOSPassword``
+* RADIUS server at ``192.168.3.10`` with shared-secret ``VyOSPassword``
.. code-block:: none
- set interfaces wireless wlan0 address '192.0.2.1/24'
+ set interfaces wireless wlan0 address '192.168.2.1/24'
set interfaces wireless wlan0 type access-point
set interfaces wireless wlan0 channel 1
set interfaces wireless wlan0 mode n
set interfaces wireless wlan0 ssid 'TEST'
set interfaces wireless wlan0 security wpa mode wpa2
set interfaces wireless wlan0 security wpa cipher CCMP
- set interfaces wireless wlan0 security wpa radius server 192.0.3.10 key 'VyOSPassword'
- set interfaces wireless wlan0 security wpa radius server 192.0.3.10 port 1812
+ set interfaces wireless wlan0 security wpa radius server 192.168.3.10 key 'VyOSPassword'
+ set interfaces wireless wlan0 security wpa radius server 192.168.3.10 port 1812
Resulting in
@@ -129,7 +129,7 @@ Resulting in
interfaces {
[...]
wireless wlan0 {
- address 192.0.2.1/24
+ address 192.168.2.1/24
channel 1
mode n
security {
@@ -137,7 +137,7 @@ Resulting in
cipher CCMP
mode wpa2
radius {
- server 192.0.3.10 {
+ server 192.168.3.10 {
key 'VyOSPassword'
port 1812
}
@@ -263,7 +263,7 @@ The wireless interface identifier can range from wlan0 to wlan999.
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address S/L Description
--------- ---------- --- -----------
- wlan0 192.0.2.254/24 u/u
+ wlan0 192.168.2.254/24 u/u
.. opcmd:: show interfaces wireless <wlanX> queue
diff --git a/docs/routing/arp.rst b/docs/routing/arp.rst
index 358476ac..96a6ffeb 100644
--- a/docs/routing/arp.rst
+++ b/docs/routing/arp.rst
@@ -35,8 +35,8 @@ Display all known ARP table entries spanning accross all interfaces
vyos@vyos:~$ show protocols static arp
Address HWtype HWaddress Flags Mask Iface
- 10.1.1.1 ether 08:00:27:de:23:2e C eth1
- 10.1.1.100 ether 08:00:27:de:23:aa CM eth1
+ 10.1.1.1 ether 00:53:00:de:23:2e C eth1
+ 10.1.1.100 ether 00:53:00:de:23:aa CM eth1
.. opcmd:: show protocols static arp interface eth1
@@ -47,7 +47,7 @@ Display all known ARP table entries on a given interface only (`eth1`):
vyos@vyos:~$ show protocols static arp interface eth1
Address HWtype HWaddress Flags Mask Iface
- 10.1.1.1 ether 08:00:27:de:23:2e C eth1
- 10.1.1.100 ether 08:00:27:de:23:aa CM eth1
+ 10.1.1.1 ether 00:53:00:de:23:2e C eth1
+ 10.1.1.100 ether 00:53:00:de:23:aa CM eth1
.. _ARP: https://en.wikipedia.org/wiki/Address_Resolution_Protocol \ No newline at end of file
diff --git a/docs/routing/routing-policy.rst b/docs/routing/routing-policy.rst
index a5714bf7..f9f3e826 100644
--- a/docs/routing/routing-policy.rst
+++ b/docs/routing/routing-policy.rst
@@ -22,8 +22,8 @@ Routing Policy Example
set policy route-map setmet rule 2 set as-path-prepend '2 2 2'
#Apply policy to BGP
- set protocols bgp 1 neighbor 1.1.1.2 address-family ipv4-unicast route-map import 'setmet'
- set protocols bgp 1 neighbor 1.1.1.2 address-family ipv4-unicast soft-reconfiguration 'inbound' <<<< ***
+ set protocols bgp 1 neighbor 203.0.113.2 address-family ipv4-unicast route-map import 'setmet'
+ set protocols bgp 1 neighbor 203.0.113.2 address-family ipv4-unicast soft-reconfiguration 'inbound' <<<< ***
*** get policy update without bouncing the neighbor
@@ -38,7 +38,7 @@ Routing Policy Example
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
- *> 22.22.22.22/32 1.1.1.2 1 0 2 i < Path
+ *> 198.51.100.3/32 203.0.113.2 1 0 2 i < Path
Total number of prefixes 1
@@ -53,7 +53,7 @@ Routing Policy Example
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
- *> 22.22.22.22/32 1.1.1.2 1 0 2 2 2 2 i < longer AS_path length
+ *> 198.51.100.3/32 203.0.113.2 1 0 2 2 2 2 i < longer AS_path length
Total number of prefixes 1
vyos@vos1:~$
diff --git a/docs/services/pppoe-server.rst b/docs/services/pppoe-server.rst
index fbfd09be..36323db9 100644
--- a/docs/services/pppoe-server.rst
+++ b/docs/services/pppoe-server.rst
@@ -35,7 +35,7 @@ Connections can be locally checked via the command
show pppoe-server sessions
ifname | username | ip | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes
-------+----------+------------+-------------------+-------------+--------+----------+----------+----------
- ppp0 | foo | 10.1.1.100 | 08:00:27:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B
+ ppp0 | foo | 10.1.1.100 | 00:53:00:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B
Client IP address pools
@@ -163,7 +163,7 @@ Once the user is connected, the user session is using the set limits and can be
show pppoe-server sessions
ifname | username | ip | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes
-------+----------+------------+-------------------+-------------+--------+----------+----------+----------
- ppp0 | foo | 10.1.1.100 | 08:00:27:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B
+ ppp0 | foo | 10.1.1.100 | 00:53:00:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B
RADIUS based shaper setup
@@ -212,6 +212,6 @@ The client, once successfully authenticated, will receive an IPv4 and an IPv6 /6
vyos@pppoe-server:~$ sh pppoe-server sessions
ifname | username | ip | ip6 | ip6-dp | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes
--------+----------+-------------+--------------------------+---------------------+-------------------+------------+--------+----------+----------+----------
- ppp0 | test | 192.168.0.1 | 2001:db8:8002:0:200::/64 | 2001:db8:8003::1/56 | 08:00:27:12:42:eb | | active | 00:00:49 | 875 B | 2.1 KiB
+ ppp0 | test | 192.168.0.1 | 2001:db8:8002:0:200::/64 | 2001:db8:8003::1/56 | 00:53:00:12:42:eb | | active | 00:00:49 | 875 B | 2.1 KiB
.. _`accel-ppp`: https://accel-ppp.org/
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 15:20:12 +0000