diff options
Diffstat (limited to 'docs')
| m--------- | docs/_include/vyos-1x | 0 | ||||
| -rw-r--r-- | docs/changelog/1.3.rst | 2 | ||||
| -rw-r--r-- | docs/changelog/1.4.rst | 15 | ||||
| -rw-r--r-- | docs/configuration/interfaces/pppoe.rst | 36 | ||||
| -rw-r--r-- | docs/configuration/vpn/openconnect.rst | 183 |
5 files changed, 197 insertions, 39 deletions
diff --git a/docs/_include/vyos-1x b/docs/_include/vyos-1x -Subproject 0f6da5dc6a769ad303795942277ae2529e44e7d +Subproject 3cbe7878bcadc0f3ecbaeab46d745b5510c26b0 diff --git a/docs/changelog/1.3.rst b/docs/changelog/1.3.rst index 306a931f..03c7b335 100644 --- a/docs/changelog/1.3.rst +++ b/docs/changelog/1.3.rst @@ -1626,7 +1626,7 @@ 2021-02-16 ========== -* :vytask:`T3318` (feature): Update Linux Kernel to v5.4.185 / 5.10.106 +* :vytask:`T3318` (feature): Update Linux Kernel to v5.4.188 / 5.10.111 2021-02-14 diff --git a/docs/changelog/1.4.rst b/docs/changelog/1.4.rst index 057e003d..55875e37 100644 --- a/docs/changelog/1.4.rst +++ b/docs/changelog/1.4.rst @@ -8,6 +8,19 @@ _ext/releasenotes.py +2022-04-15 +========== + +* :vytask:`T4327` (default): Ethernet interface configuration fails on Hyper-V due to speed/duplex/autoneg ethtool command error +* :vytask:`T4364` (feature): salt-minion: Upgrade to 3004 and migrate to get_config_dict() + + +2022-04-13 +========== + +* :vytask:`T4333` (feature): Jinja2: add plugin to test if a variable is defined and not none to reduce template complexity + + 2022-04-08 ========== @@ -1987,7 +2000,7 @@ ========== * :vytask:`T3313` (bug): ospfv3 interface missing options -* :vytask:`T3318` (feature): Update Linux Kernel to v5.4.185 / 5.10.106 +* :vytask:`T3318` (feature): Update Linux Kernel to v5.4.188 / 5.10.111 2021-02-15 diff --git a/docs/configuration/interfaces/pppoe.rst b/docs/configuration/interfaces/pppoe.rst index 4a31efc5..e1bb3056 100644 --- a/docs/configuration/interfaces/pppoe.rst +++ b/docs/configuration/interfaces/pppoe.rst @@ -115,24 +115,26 @@ PPPoE options timeout period, after which an idle PPPoE link will be disconnected. A non-zero idle timeout will never disconnect the link after it first came up. -.. cfgcmd:: set interfaces pppoe <interface> default-route [auto | force | none] +.. cfgcmd:: set interfaces pppoe <interface> no-default-route - Use this command to specify whether to automatically add a default route - pointing to the endpoint of the PPPoE when the link comes up. The default - route is only added if no other default route already exists in the system. + Only request an address from the PPPoE server but do not install any default + route. - **default:** A default route to the remote endpoint is automatically added - when the link comes up (i.e. auto). + Example: - * auto: A default route is added if no other default route (From any - source) already exists. - * force: A default route is added after removing *all* existing default - routes. - * none: No default route is installed. + .. code-block:: none + + set interfaces pppoe pppoe0 no-default-route + +.. cfgcmd:: set interfaces pppoe <interface> default-route-distance <distance> + + Set the distance for the default gateway sent by the PPPoE server. -.. note:: In all modes except 'none', all default routes using this interface - will be removed when the interface is torn down - even manually installed - static routes. + Example: + + .. code-block:: none + + set interfaces pppoe pppoe0 default-route-distance 220 .. cfgcmd:: set interfaces pppoe <interface> idle-timeout <time> @@ -190,7 +192,7 @@ PPPoE options .. hint:: MSS value = MTU - 20 (IP header) - 20 (TCP header), resulting in 1452 bytes on a 1492 byte MTU. - Instead of a numerical MSS value `clamp-mss-to-pmtu` can be used to + Instead of a numerical MSS value `clamp-mss-to-pmtu` can be used to automatically set the proper value. .. cfgcmd:: set interfaces pppoe <interface> ip disable-forwarding @@ -235,8 +237,8 @@ IPv6 .. hint:: MSS value = MTU - 20 (IP header) - 20 (TCP header), resulting in 1452 bytes on a 1492 byte MTU. - - Instead of a numerical MSS value `clamp-mss-to-pmtu` can be used to + + Instead of a numerical MSS value `clamp-mss-to-pmtu` can be used to automatically set the proper value. .. cfgcmd:: set interfaces pppoe <interface> ipv6 disable-forwarding diff --git a/docs/configuration/vpn/openconnect.rst b/docs/configuration/vpn/openconnect.rst index 356b3322..7a279472 100644 --- a/docs/configuration/vpn/openconnect.rst +++ b/docs/configuration/vpn/openconnect.rst @@ -13,11 +13,8 @@ device traffic across public networks and private networks, also encrypts the traffic with SSL protocol. The remote user will use the openconnect client to connect to the router and -will receive an IP address from a VPN pool, allowing full access to the network. - -.. note:: All certificates should be stored on VyOS under /config/auth. If - certificates are not stored in the /config directory they will not be - migrated during a software update. +will receive an IP address from a VPN pool, allowing full access to the +network. ************* Configuration @@ -27,18 +24,18 @@ SSL Certificates ================ We need to generate the certificate which authenticates users who attempt to -access the network resource through the SSL VPN tunnels. The following command -will create a self signed certificates and will be stored in the file path -`/config/auth`. +access the network resource through the SSL VPN tunnels. The following commands +will create a self signed certificates and will be stored in configuration: .. code-block:: none - openssl req -newkey rsa:4096 -new -nodes -x509 -days 3650 -keyout /config/auth/server.key -out /config/auth/server.crt - openssl req -new -x509 -key /config/auth/server.key -out /config/auth/ca.crt - -We can also create the certificates using Cerbort which is an easy-to-use client -that fetches a certificate from Let's Encrypt an open certificate authority -launched by the EFF, Mozilla, and others and deploys it to a web server. + run generate pki ca install <CA name> + run generate pki certificate sign <CA name> install <Server name> + +We can also create the certificates using Cerbort which is an easy-to-use +client that fetches a certificate from Let's Encrypt an open certificate +authority launched by the EFF, Mozilla, and others and deploys it to a web +server. .. code-block:: none @@ -50,7 +47,7 @@ Server Configuration .. code-block:: none set vpn openconnect authentication local-users username <user> password <pass> - set vpn openconnect authentication mode <local|radius> + set vpn openconnect authentication mode <local password|radius> set vpn opneconnect network-settings client-ip-settings subnet <subnet> set vpn openconnect network-settings name-server <address> set vpn openconnect network-settings name-server <address> @@ -58,6 +55,29 @@ Server Configuration set vpn openconnect ssl certificate <pki-cert-name> set vpn openconnect ssl passphrase <pki-password> +2FA OTP support +==================== + +Instead of password only authentication, 2FA password +authentication + OTP key can be used. Alternatively, OTP authentication only, +without a password, can be used. +To do this, an OTP configuration must be added to the configuration above: + +.. code-block:: none + + set vpn openconnect authentication mode local <password-otp|otp> + set vpn openconnect authentication local-users username <user> otp <key> + set vpn openconnect authentication local-users username <user> interval <interval (optional)> + set vpn openconnect authentication local-users username <user> otp-length <otp-length (optional)> + set vpn openconnect authentication local-users username <user> token-type <token-type (optional)> + +For generating an OTP key in VyOS, you can use the CLI command +(operational mode): + +.. code-block:: none + + generate openconnect username <user> otp-key hotp-time + ************ Verification ************ @@ -65,10 +85,133 @@ Verification .. code-block:: none - vyos@RTR1:~$ show openconnect-server sessions - - interface username ip remote IP RX TX state uptime - ----------- ---------- ------------ ------------- -------- -------- --------- -------- - sslvpn0 user4 100.64.0.105 xx.xxx.49.253 127.3 KB 160.0 KB connected 12m:28s + vyos@vyos:~$ sh openconnect-server sessions + interface username ip remote IP RX TX state uptime + ----------- ---------- ------------- ----------- ------- --------- --------- -------- + sslvpn0 tst 172.20.20.198 192.168.6.1 0 bytes 152 bytes connected 3s .. note:: It is compatible with Cisco (R) AnyConnect (R) clients. + +******* +Example +******* + +SSL Certificates generation +=========================== + +Follow the instructions to generate CA cert (in configuration mode): + +.. code-block:: none + + vyos@vyos# run generate pki ca install ca-ocserv + Enter private key type: [rsa, dsa, ec] (Default: rsa) + Enter private key bits: (Default: 2048) + Enter country code: (Default: GB) US + Enter state: (Default: Some-State) Delaware + Enter locality: (Default: Some-City) Mycity + Enter organization name: (Default: VyOS) MyORG + Enter common name: (Default: vyos.io) oc-ca + Enter how many days certificate will be valid: (Default: 1825) 3650 + Note: If you plan to use the generated key on this router, do not encrypt the private key. + Do you want to encrypt the private key with a passphrase? [y/N] N + 2 value(s) installed. Use "compare" to see the pending changes, and "commit" to apply. + [edit] + +Follow the instructions to generate server cert (in configuration mode): + +.. code-block:: none + + vyos@vyos# run generate pki certificate sign ca-ocserv install srv-ocserv + Do you already have a certificate request? [y/N] N + Enter private key type: [rsa, dsa, ec] (Default: rsa) + Enter private key bits: (Default: 2048) + Enter country code: (Default: GB) US + Enter state: (Default: Some-State) Delaware + Enter locality: (Default: Some-City) Mycity + Enter organization name: (Default: VyOS) MyORG + Enter common name: (Default: vyos.io) oc-srv + Do you want to configure Subject Alternative Names? [y/N] N + Enter how many days certificate will be valid: (Default: 365) 1830 + Enter certificate type: (client, server) (Default: server) + Note: If you plan to use the generated key on this router, do not encrypt the private key. + Do you want to encrypt the private key with a passphrase? [y/N] N + 2 value(s) installed. Use "compare" to see the pending changes, and "commit" to apply. + [edit] + +Each of the install command should be applied to the configuration and commited +before using under the openconnect configuration: + +.. code-block:: none + + vyos@vyos# commit + [edit] + vyos@vyos# save + Saving configuration to '/config/config.boot'... + Done + [edit] + +Openconnect Configuration +========================= + +Simple setup with one user added and password authentication: + +.. code-block:: none + + set vpn openconnect authentication local-users username tst password 'OC_bad_Secret' + set vpn openconnect authentication mode local password + set vpn openconnect network-settings client-ip-settings subnet '172.20.20.0/24' + set vpn openconnect network-settings name-server '10.1.1.1' + set vpn openconnect network-settings name-server '10.1.1.2' + set vpn openconnect ssl ca-certificate 'ca-ocserv' + set vpn openconnect ssl certificate 'srv-ocserv' + +Adding a 2FA with an OTP-key +============================ + +First the OTP keys must be generated and sent to the user and to the +configuration: + +.. code-block:: none + + vyos@vyos:~$ generate openconnect username tst otp-key hotp-time + # You can share it with the user, he just needs to scan the QR in his OTP app + # username: tst + # OTP KEY: 5PA4SGYTQSGOBO3H3EQSSNCUNZAYAPH2 + # OTP URL: otpauth://totp/tst@vyos?secret=5PA4SGYTQSGOBO3H3EQSSNCUNZAYAPH2&digits=6&period=30 + █████████████████████████████████████████ + █████████████████████████████████████████ + ████ ▄▄▄▄▄ █▀ ██▄▀ ▄█▄▀▀▄▄▄▄██ ▄▄▄▄▄ ████ + ████ █ █ █▀ █▄▄▀▀▀▄█ ▄▄▀▄ █ █ █ ████ + ████ █▄▄▄█ █▀█▀▄▄▀ ▄▀ █▀ ▀▄██ █▄▄▄█ ████ + ████▄▄▄▄▄▄▄█▄█▄▀ ▀▄█ ▀ ▀ ▀ █▄█▄▄▄▄▄▄▄████ + ████ ▄▄▄▀▄▄ ▄███▀▄▀█▄██▀ ▀▄ ▀▄█ ▀ ▀████ + ████ ▀▀ ▀ ▄█▄ ▀ ▀▄ ▄█▀ ▄█ ▄▀▀▄██ █████ + ████▄ █▄▀▀▄█▀ ▀█▄█▄▄▄▄ ▄▀█▀▀█ ▀ ▄ ▀█▀████ + █████ ▀█▀▄▄ █ ▀▄▄ ▄█▄ ▀█▀▀ █▀ ▄█████ + ████▀██▀█▄▄ ▀▀▀▀█▄▀ ▀█▄▄▀▀▀ ▀ ▀█▄██▀▀████ + ████▄ ▄ ▄▀▄██▀█ ▄ ▀▄██ ▄▄ ▀▀▄█▄██ ▄█████ + ████▀▀ ▄▀ ▄ ▀█▀█▀█ █▀█▄▄▀█▀█▄██▄▄█ ▀████ + ████ █ ▀█▄▄█▄ ▀ ▄▄▀▀ ▀ █▄█▀████ █▀ ▀████ + ████▄██▄██▄█▀ ▄▀ ▄▄▀▄ ▄▀█ ▄ ▄▄▄ ▀█▄ ████ + ████ ▄▄▄▄▄ █▄ ▀█▄█ ▄ ▀ ▄ ▄ █▄█ ▄▀▄█████ + ████ █ █ █ ▀▄██▄▄▀█▄▀▄██▄▀ ▄ ▀██▀████ + ████ █▄▄▄█ █ ██▀▄▄ ▀▄▄▀█▀ ▀█ ▄▀█ ▀██████ + ████▄▄▄▄▄▄▄█▄███▄███▄█▄▄▄▄█▄▄█▄██▄█▄█████ + █████████████████████████████████████████ + █████████████████████████████████████████ + # To add this OTP key to configuration, run the following commands: + set vpn openconnect authentication local-users username tst otp key 'ebc1c91b13848ce0bb67d9212934546e41803cfa' + +Next it is necessary to configure 2FA for OpenConnect: + +.. code-block:: none + + set vpn openconnect authentication mode local password-otp + set vpn openconnect authentication local-users username tst otp key 'ebc1c91b13848ce0bb67d9212934546e41803cfa' + +Now when connecting the user will first be asked for the password +and then the OTP key. + +.. warning:: When using Time-based one-time password (TOTP) (OTP HOTP-time), + be sure that the time on the server and the + OTP token generator are synchronized by NTP |