diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/appendix/examples/index.rst | 1 | ||||
| -rw-r--r-- | docs/appendix/examples/ospf-unnumbered.rxt | 120 |
2 files changed, 121 insertions, 0 deletions
diff --git a/docs/appendix/examples/index.rst b/docs/appendix/examples/index.rst index 3ea5cea7..a77ee380 100644 --- a/docs/appendix/examples/index.rst +++ b/docs/appendix/examples/index.rst @@ -12,3 +12,4 @@ This chapter contains various configuration Examples dmvpn zone-policy bgp-ipv6-unnumbered + ospf-unnumbered diff --git a/docs/appendix/examples/ospf-unnumbered.rxt b/docs/appendix/examples/ospf-unnumbered.rxt new file mode 100644 index 00000000..f312a533 --- /dev/null +++ b/docs/appendix/examples/ospf-unnumbered.rxt @@ -0,0 +1,120 @@ +.. _examples-ospf-unnumbered: + +VyOS OSPF unnumbered with ecmp +---------------------------------------------- + +General infomration can be found in the :ref:`Routing-OSPF` chapter. + +Configuration +^^^^^^^^^^^^^ + +- Router A: + +.. code-block:: sh + + set interfaces ethernet eth0 address '10.0.0.1/24' + set interfaces ethernet eth1 address '192.168.0.1/32' + set interfaces ethernet eth1 ip ospf network 'point-to-point' + set interfaces ethernet eth2 address '192.168.0.1/32' + set interfaces ethernet eth2 ip ospf network 'point-to-point' + set interfaces loopback lo address '192.168.0.1/32' + set protocols ospf area 0.0.0.0 network '192.168.0.1/32' + set protocols ospf parameters router-id '192.168.0.1' + set protocols ospf redistribute connected + +- Router B: + +.. code-block:: sh + + set interfaces ethernet eth0 address '10.0.0.2/24' + set interfaces ethernet eth1 address '192.168.0.2/32' + set interfaces ethernet eth1 ip ospf network 'point-to-point' + set interfaces ethernet eth2 address '192.168.0.2/32' + set interfaces ethernet eth2 ip ospf network 'point-to-point' + set interfaces loopback lo address '192.168.0.2/32' + set protocols ospf area 0.0.0.0 network '192.168.0.2/32' + set protocols ospf parameters router-id '192.168.0.2' + set protocols ospf redistribute connected + + +Results +^^^^^^^^^^^^^ + +- Router A: + +.. code-block:: sh + + vyos@vyos:~$ show interfaces + Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down + Interface IP Address S/L Description + --------- ---------- --- ----------- + eth0 10.0.0.1/24 u/u + eth1 192.168.0.1/32 u/u + eth2 192.168.0.1/32 u/u + lo 127.0.0.1/8 u/u + 192.168.0.1/32 + ::1/128 + vyos@vyos:~$ + + +.. code-block:: sh + + vyos@vyos:~$ show ip route + Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, + F - PBR, f - OpenFabric, + > - selected route, * - FIB route, q - queued route, r - rejected route + + S>* 0.0.0.0/0 [210/0] via 10.0.0.254, eth0, 00:57:34 + O 10.0.0.0/24 [110/20] via 192.168.0.2, eth1 onlink, 00:13:21 + via 192.168.0.2, eth2 onlink, 00:13:21 + C>* 10.0.0.0/24 is directly connected, eth0, 00:57:35 + O 192.168.0.1/32 [110/0] is directly connected, lo, 00:48:53 + C * 192.168.0.1/32 is directly connected, eth2, 00:56:31 + C * 192.168.0.1/32 is directly connected, eth1, 00:56:31 + C>* 192.168.0.1/32 is directly connected, lo, 00:57:36 + O>* 192.168.0.2/32 [110/1] via 192.168.0.2, eth1 onlink, 00:29:03 + * via 192.168.0.2, eth2 onlink, 00:29:03 + vyos@vyos:~$ + + +- Router B: + +.. code-block:: sh + + vyos@vyos:~$ show interfaces + Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down + Interface IP Address S/L Description + --------- ---------- --- ----------- + eth0 10.0.0.2/24 u/u + eth1 192.168.0.2/32 u/u + eth2 192.168.0.2/32 u/u + lo 127.0.0.1/8 u/u + 192.168.0.2/32 + ::1/128 + vyos@vyos:~$ + + +.. code-block:: sh + + vyos@vyos:~$ show ip route + Codes: K - kernel route, C - connected, S - static, R - RIP, + O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, + T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, + F - PBR, f - OpenFabric, + > - selected route, * - FIB route, q - queued route, r - rejected route + + S>* 0.0.0.0/0 [210/0] via 10.0.0.254, eth0, 00:57:34 + O 10.0.0.0/24 [110/20] via 192.168.0.1, eth1 onlink, 00:13:21 + via 192.168.0.1, eth2 onlink, 00:13:21 + C>* 10.0.0.0/24 is directly connected, eth0, 00:57:35 + O 192.168.0.2/32 [110/0] is directly connected, lo, 00:48:53 + C * 192.168.0.2/32 is directly connected, eth2, 00:56:31 + C * 192.168.0.2/32 is directly connected, eth1, 00:56:31 + C>* 192.168.0.2/32 is directly connected, lo, 00:57:36 + O>* 192.168.0.1/32 [110/1] via 192.168.0.1, eth1 onlink, 00:29:03 + * via 192.168.0.1, eth2 onlink, 00:29:03 + vyos@vyos:~$ + + |