diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/_static/images/pppoe-ipv6-pd-diagram.png | bin | 0 -> 12358 bytes | |||
| -rw-r--r-- | docs/configexamples/index.rst | 1 | ||||
| -rw-r--r-- | docs/configexamples/pppoe-ipv6-basic.rst | 110 |
3 files changed, 111 insertions, 0 deletions
diff --git a/docs/_static/images/pppoe-ipv6-pd-diagram.png b/docs/_static/images/pppoe-ipv6-pd-diagram.png Binary files differnew file mode 100644 index 00000000..4bae4db0 --- /dev/null +++ b/docs/_static/images/pppoe-ipv6-pd-diagram.png diff --git a/docs/configexamples/index.rst b/docs/configexamples/index.rst index b2f7bfde..709708ce 100644 --- a/docs/configexamples/index.rst +++ b/docs/configexamples/index.rst @@ -17,3 +17,4 @@ This chapter contains various configuration examples: tunnelbroker-ipv6 ha wan-load-balancing + pppoe-ipv6-basic diff --git a/docs/configexamples/pppoe-ipv6-basic.rst b/docs/configexamples/pppoe-ipv6-basic.rst new file mode 100644 index 00000000..69cb994d --- /dev/null +++ b/docs/configexamples/pppoe-ipv6-basic.rst @@ -0,0 +1,110 @@ +.. _examples-pppoe-ipv6-basic: + +####################################### +PPPoE IPv6 Basic Setup for Home Network +####################################### + +This document is to describe a basic setup using PPPoE with DHCPv6-PD + +SLAAC to construct a typical home network. The user can follow steps described +here to quickly setup a working network and use this as a starting point to +further configure or fine tune other settings. + +To achieve this, your ISP is required to support DHCPv6-PD. If you're not sure, +please contact your ISP for more information. + +Network Topology +================ + +.. image:: /_static/images/pppoe-ipv6-pd-diagram.png + :width: 60% + :align: center + :alt: Network Topology Diagram + +Configurations +============== + +PPPoE Setup +----------- + +.. code-block:: none + + set interfaces pppoe pppoe0 authentication password <YOUR PASSWORD> + set interfaces pppoe pppoe0 authentication user <YOUR USERNAME> + set interfaces pppoe pppoe0 service-name <YOUR SERVICENAME> + set interfaces pppoe pppoe0 source-interface 'eth0' + +* Fill ``password`` and ``user`` with the credential provided by your ISP. +* ``service-name`` can be an arbitrary string. + +DHCPv6-PD Setup +--------------- + +During address configuration, in addition to assigning an address to the WAN +interface, ISP also provides a prefix to allow router to configure addresses of +LAN interface and other nodes connecting to LAN, which is called prefix +delegation (PD). + +.. code-block:: none + + set interfaces pppoe pppoe0 ipv6 address autoconf + set interfaces pppoe pppoe0 dhcpv6-options pd 0 interface eth1 address '100' + +* Here we use prefix to configure the address of eth1 (LAN) to form ``<prefix>::64``, + where ``64`` is hexadecimal of address 100. +* For home network users, most of time ISP only provides /64 prefix, hence + there is no need to set SLA ID and prefix length. See :ref:`pppoe-interface` + for more information. + +Router Advertisement +-------------------- + +We need to enable router advertisement for LAN network so that PC can receive +the prefix and use SLAAC to configure address automatically. + +.. code-block:: none + + set service router-advert interface eth1 link-mtu '1492' + set service router-advert interface eth1 name-server <NAME SERVER> + set service router-advert interface eth1 prefix ::/64 valid-lifetime '172800' + +* Set MTU in advertisement to 1492 because of PPPoE header overhead. +* Set DNS server address in advertisement so that clients can obtain it by using + RDNSS option. Most operating systems (Windows, Linux, Mac) should + already support it. +* Here we set the prefix to ``::/64`` to indicate advertising any /64 prefix + the LAN interface is assigned. +* Since some ISPs disconnects continuous connection for every 2~3 days, we set + ``valid-lifetime`` to 2 days to allow PC for phasing out old address. + +Basic Firewall +-------------- + +To have basic protection while keeping IPv6 network functional, we need to: + +* Allow all established and related traffic for router and LAN +* Allow all icmpv6 packets for router and LAN +* Allow DHCPv6 packets for router + +.. code-block:: none + + set firewall ipv6-name WAN_IN default-action 'drop' + set firewall ipv6-name WAN_IN rule 10 action 'accept' + set firewall ipv6-name WAN_IN rule 10 state established 'enable' + set firewall ipv6-name WAN_IN rule 10 state related 'enable' + set firewall ipv6-name WAN_IN rule 20 action 'accept' + set firewall ipv6-name WAN_IN rule 20 protocol 'icmpv6' + set firewall ipv6-name WAN_LOCAL default-action 'drop' + set firewall ipv6-name WAN_LOCAL rule 10 action 'accept' + set firewall ipv6-name WAN_LOCAL rule 10 state established 'enable' + set firewall ipv6-name WAN_LOCAL rule 10 state related 'enable' + set firewall ipv6-name WAN_LOCAL rule 20 action 'accept' + set firewall ipv6-name WAN_LOCAL rule 20 protocol 'icmpv6' + set firewall ipv6-name WAN_LOCAL rule 30 action 'accept' + set firewall ipv6-name WAN_LOCAL rule 30 destination port '546' + set firewall ipv6-name WAN_LOCAL rule 30 protocol 'udp' + set firewall ipv6-name WAN_LOCAL rule 30 source port '547' + set interfaces pppoe pppoe0 firewall in ipv6-name 'WAN_IN' + set interfaces pppoe pppoe0 firewall local ipv6-name 'WAN_LOCAL' + +Note to allow router to receive DHCPv6 response from ISP, we need to allow +packets with source port 547 (server) and destination port 546 (client). |
