diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/configuration/system/conntrack.rst | 167 |
1 files changed, 112 insertions, 55 deletions
diff --git a/docs/configuration/system/conntrack.rst b/docs/configuration/system/conntrack.rst index 0fe0d575..68a4f2b8 100644 --- a/docs/configuration/system/conntrack.rst +++ b/docs/configuration/system/conntrack.rst @@ -1,13 +1,15 @@ -################### -Connection tracking -################### + +######### +Conntrack +######### VyOS can be configured to track connections using the connection tracking subsystem. Connection tracking becomes operational once either stateful firewall or NAT is configured. -Conntrack Table ---------------- +********* +Configure +********* .. cfgcmd:: set system conntrack table-size <1-50000000> :defaultvalue: @@ -30,12 +32,6 @@ Conntrack Table searching the connection tracking table faster. The hash table uses “buckets” to record entries in the connection tracking table. - -Modules -------- - -Enables ``conntrack`` modules. All modules are enable by default. - .. cfgcmd:: set system conntrack modules ftp .. cfgcmd:: set system conntrack modules h323 .. cfgcmd:: set system conntrack modules nfs @@ -44,12 +40,15 @@ Enables ``conntrack`` modules. All modules are enable by default. .. cfgcmd:: set system conntrack modules sqlnet .. cfgcmd:: set system conntrack modules tftp -Use ``delete system conntrack modules`` to deactive all modules. -Or, for example ftp, ``delete system conntrack modules ftp``. + Configure the connection tracking protocol helper modules. + All modules are enable by default. + | Use `delete system conntrack modules` to deactive all modules. + | Or, for example ftp, `delete system conntrack modules ftp`. -Define Connection Timeouts --------------------------- + +Define Conection Timeouts +========================= VyOS supports setting timeouts for connections according to the connection type. You can set timeout values for generic connections, for ICMP @@ -88,43 +87,101 @@ You can also define custom timeout values to apply to a specific subset of connections, based on a packet and flow selector. To do this, you need to create a rule defining the packet and flow selector. -.. cfgcmd:: set system conntrack timeout custom rule <1-999999> - description <test> -.. cfgcmd:: set system conntrack timeout custom rule <1-999999> - destination address <ip-address> -.. cfgcmd:: set system conntrack timeout custom rule <1-999999> - destination port <value> -.. cfgcmd:: set system conntrack timeout custom rule <1-999999> - inbound-interface <interface> -.. cfgcmd:: set system conntrack timeout custom rule <1-999999> - source address <ip-address> -.. cfgcmd:: set system conntrack timeout custom rule <1-999999> - source port <value> -.. cfgcmd:: set system conntrack timeout custom rule <1-999999> - protocol <protocol> - - Configure customized timeout rules for selective connection tracking. - -Conntrack Ignore ----------------- - -Customized ignore rules, based on a packet and flow selector, can be -configured in VyOS. To do this, you can configure as much rules as -needed using next commands: - -.. cfgcmd:: set system conntrack ignore rule <1-999999> - description <text> -.. cfgcmd:: set system conntrack ignore rule <1-999999> - destination address <ip-address> -.. cfgcmd:: set system conntrack ignore rule <1-999999> - destination port <port> -.. cfgcmd:: set system conntrack ignore rule <1-999999> - inbound-interface <interface> -.. cfgcmd:: set system conntrack ignore rule <1-999999> - protocol <protocol> -.. cfgcmd:: set system conntrack ignore rule <1-999999> - source address <ip-address> -.. cfgcmd:: set system conntrack ignore rule <1-999999> - source port <port> - - Configure customized ignore rules for selective connection tracking. +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> description <test> + + Set a rule description. + + +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> destination address <ip-address> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> source address <ip-address> + + set a destination and/or source address. Accepted input: + + .. code-block:: none + + <x.x.x.x> IP address to match + <x.x.x.x/x> Subnet to match + <x.x.x.x>-<x.x.x.x> + IP range to match + !<x.x.x.x> Match everything except the specified address + !<x.x.x.x/x> Match everything except the specified subnet + !<x.x.x.x>-<x.x.x.x> + Match everything except the specified range + +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> destination port <value> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> source port <value> + + Set a destination and/or source port. Accepted input: + + .. code-block:: none + + <port name> Named port (any name in /etc/services, e.g., http) + <1-65535> Numbered port + <start>-<end> Numbered port range (e.g., 1001-1005) + + Multiple destination ports can be specified as a comma-separated list. + The whole list can also be "negated" using '!'. For example: + `!22,telnet,http,123,1001-1005`` + + + +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol icmp <1-21474836> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol other <1-21474836> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp close <1-21474836> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp close-wait <1-21474836> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp established <1-21474836> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp fin-wait <1-21474836> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp last-ack <1-21474836> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp syn-recv <1-21474836> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp syn-sent <1-21474836> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp time-wait <1-21474836> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol udp other <1-21474836> +.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol udp stream <1-21474836> + + Set the timeout in secounds for a protocol or state in a custom rule. + + +.. cfgcmd:: set system conntrack tcp half-open-connections <1-21474836> + :defaultvalue: + + Set the maximum number of TCP half-open connections. + +.. cfgcmd:: set system conntrack tcp loose <enable | disable> + :defaultvalue: + + Policy to track previously established connections. + +.. cfgcmd:: set system conntrack tcp max-retrans <1-2147483647> + :defaultvalue: + + Set the number of TCP maximum retransmit attempts. + +.. cfgcmd:: set system conntrack ignore rule <1-9999> description <text> +.. cfgcmd:: set system conntrack ignore rule <1-9999> destination address <ip-address> +.. cfgcmd:: set system conntrack ignore rule <1-9999> destination port <port> +.. cfgcmd:: set system conntrack ignore rule <1-9999> inbound-interface <interface> +.. cfgcmd:: set system conntrack ignore rule <1-9999> protocol <protocol> +.. cfgcmd:: set system conntrack ignore rule <1-9999> source address <ip-address> +.. cfgcmd:: set system conntrack ignore rule <1-9999> source port <port> + + Customized ignore rules, based on a packet and flow selector. + +.. cfgcmd:: set system conntrack log icmp destroy +.. cfgcmd:: set system conntrack log icmp new +.. cfgcmd:: set system conntrack log icmp update +.. cfgcmd:: set system conntrack log other destroy +.. cfgcmd:: set system conntrack log other new +.. cfgcmd:: set system conntrack log other update +.. cfgcmd:: set system conntrack log tcp destroy +.. cfgcmd:: set system conntrack log tcp new +.. cfgcmd:: set system conntrack log tcp update close-wait +.. cfgcmd:: set system conntrack log tcp update established +.. cfgcmd:: set system conntrack log tcp update fin-wait +.. cfgcmd:: set system conntrack log tcp update last-ack +.. cfgcmd:: set system conntrack log tcp update syn-received +.. cfgcmd:: set system conntrack log tcp update time-wait +.. cfgcmd:: set system conntrack log udp destroy +.. cfgcmd:: set system conntrack log udp new +.. cfgcmd:: set system conntrack log udp update + + Log the connection tracking events per protocol.
\ No newline at end of file |