diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/services/pppoe-server.rst | 37 |
1 files changed, 17 insertions, 20 deletions
diff --git a/docs/services/pppoe-server.rst b/docs/services/pppoe-server.rst index 46cd2795..481831ba 100644 --- a/docs/services/pppoe-server.rst +++ b/docs/services/pppoe-server.rst @@ -1,7 +1,8 @@ .. _pppoe-server: -PPPoE server ------------- +############ +PPPoE Server +############ VyOS utilizes `accel-ppp`_ to provide PPPoE server functionality. It can be used with local authentication or a connected RADIUS server. @@ -11,7 +12,7 @@ used with local authentication or a connected RADIUS server. connected users, in order to become effective.** Configuration -^^^^^^^^^^^^^ +============= The example below uses ACN as access-concentrator name, assigns an address from the pool 10.1.1.100-111, terminates at the local endpoint 10.1.1.1 and @@ -54,10 +55,8 @@ then authentication again. disable Disables session control deny Deny second session authorization - - -Client IP address pools -======================= +Client Address Pools +-------------------- To automatically assign the client an IP address as tunnel endpoint, a client IP pool is needed. The source can be either RADIUS or a local subnet or IP @@ -135,8 +134,8 @@ Example for changing rate-limit via RADIUS CoA Filter-Id=5000/4000 (means 5000Kbit down-stream rate and 4000Kbit up-stream rate) If attribute Filter-Id redefined, replace it in radius coa request -Automatic VLAN creation -======================= +Automatic VLAN Creation +----------------------- VLAN's can be created by accel-ppp on the fly if via the use of the kernel module vlan_mon, which is monitoring incoming vlans and creates the necessary @@ -157,12 +156,12 @@ remove it again. Bandwidth Shaping -^^^^^^^^^^^^^^^^^ +----------------- Bandwidth rate limits can be set for local users or RADIUS based attributes. -Bandwidth Shaping for local users -================================= +For Local Users +^^^^^^^^^^^^^^^ The rate-limit is set in kbit/sec. @@ -192,8 +191,8 @@ displayed via 'show pppoe-server sessions'. ppp0 | foo | 10.1.1.100 | 00:53:00:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B -RADIUS based shaper setup -========================= +For RADIUS users +^^^^^^^^^^^^^^^^ The current attribute 'Filter-Id' is being used as default and can be setup within RADIUS: @@ -210,12 +209,11 @@ is working. Other attributes can be used, but they have to be in one of the dictionaries in /usr/share/accel-ppp/radius. +Examples +======== -Practical Configuration Examples -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Dual-stack provisioning with IPv6 PD via pppoe -============================================== +Dual-Stack IPv4/IPv6 provisioning with PD +----------------------------------------- The example below covers a dual-stack configuration via pppoe-server. @@ -232,7 +230,6 @@ The example below covers a dual-stack configuration via pppoe-server. set service pppoe-server interface 'eth2' set service pppoe-server local-ip '10.100.100.1' - The client, once successfully authenticated, will receive an IPv4 and an IPv6 /64 address, to terminate the pppoe endpoint on the client side and a /56 subnet for the clients internal use. |