diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/appendix/commandtree/configmode.rst | 542 | ||||
| -rw-r--r-- | docs/appendix/commandtree/index.rst | 13 | ||||
| -rw-r--r-- | docs/appendix/commandtree/operationmode.rst | 444 | ||||
| -rw-r--r-- | docs/index.rst | 1 |
4 files changed, 0 insertions, 1000 deletions
diff --git a/docs/appendix/commandtree/configmode.rst b/docs/appendix/commandtree/configmode.rst deleted file mode 100644 index 049863b6..00000000 --- a/docs/appendix/commandtree/configmode.rst +++ /dev/null @@ -1,542 +0,0 @@ -.. _commandtree_configmode: - -Configuration mode ------------------- - -.. code-block:: none - - confirm Confirm prior commit-confirm - comment Add comment to this configuration element - commit Commit the current set of changes - commit-confirm Commit the current set of changes with 'confirm' required - compare Compare configuration revisions - copy Copy a configuration element - delete Delete a configuration element - discard Discard uncommitted changes - edit Edit a sub-element - exit Exit from this configuration level - load Load configuration from a file and replace running configuration - loadkey Load user SSH key from a file - merge Load configuration from a file and merge running configuration - rename Rename a configuration element - rollback Rollback to a prior config revision (requires reboot) - run Run an operational-mode command - save Save configuration to a file - set Set the value of a parameter or create a new element - show Show the configuration (default values may be suppressed) - - -Confirm -^^^^^^^ - -The ``confirm`` command confirms the prior ``commit-confirm``. - -Comment -^^^^^^^ - -The ``comment`` commands allow you to insert a comment above the current configuration section. -The command cannot be used at the top of the configuration hierarchy, only on subsections. Comments needs to be commited, just like other config changes. - -To add a comment to a section, while being already at the proper section level: - -.. code-block:: none - - [edit <section>] - vyos@vyos# comment "Type Comment Here" - -To add a comment directly to a section, from the top or a higher section: - -.. code-block:: none - - [edit] - vyos@vyos# comment <section> "Type Comment Here" - -To remove a comment, add a blank comment to overwrite: - -.. code-block:: none - - [edit <section>] - vyos@vyos# comment "" - -Examples -******** - -To add a comment to the "interfaces" section: - -.. code-block:: none - - [edit] - vyos@vyos# edit interfaces - [edit interfaces] - vyos@vyos# comment "Here is a comment" - [edit interfaces] - vyos@vyos# commit - -The comment would then appear like this: - -.. code-block:: none - - [edit] - vyos@vyos# show - /* Here is a comment */ - interfaces { - ethernet eth0 { - [...] - - -An important thing to note is that since the comment is added on top of the section, it will not appear if the ``show <section>`` command is used. With the above example, the ``show interfaces`` command would return starting after the "interfaces {" line, hiding the comment: - -.. code-block:: none - - [edit] - vyos@vyos# show interfaces - ethernet eth0 { - [...] - - -To add a comment to the interfaces section from the top: - -.. code-block:: none - - [edit] - vyos@vyos# comment interfaces "test" - - -The comment can be added to any node that already exists, even if it's multiple levels lower: - -.. code-block:: none - - [edit] - vyos@vyos# comment interfaces ethernet eth0 vif 222 address "Far down comment" - - -Commit -^^^^^^ - -The ``commit`` command commits the proposed changes to the configuration file. -Every changes done in the configuration session is only applied when the configuration is committed. To view the changes that will be applied, use the show command. -To discard the changes without committing, use the ``discard`` command. The ``commit`` command doesn't save the configuration, you need to manually use the ``save`` command. - -The confirm keyword can be added, see ``commit-confirm``. A comment can be entered, it will appear in the commit log. - -.. code-block:: none - - [edit] - vyos@vyos# commit - Possible completions: - <Enter> Commit working configuration - comment Comment for commit log - -Commit-confirm -^^^^^^^^^^^^^^ - -The ``commit-confirm`` command commits the proposed changes to the configuration file and starts a timer. -If the ``confirm`` command is not entered before the timer expiration, the configuration will be rolled back and VyOS will reboot. -The default timer value is 10 minutes, but a custom value can be entered. - -.. code-block:: none - - [edit] - vyos@vyos# commit-confirm - Possible completions: - <Enter> Commit, rollback/reboot in 10 minutes if no confirm - <N> Commit, rollback/reboot in N minutes if no confirm - comment Comment for commit log - - -Compare -^^^^^^^ - -VyOS maintains backups of previous configurations. To compare configuration revisions in configuration mode, use the compare command: - -.. code-block:: none - - [edit] - vyos@vyos# compare - Possible completions: - <Enter> Compare working & active configurations - saved Compare working & saved configurations - <N> Compare working with revision N - <N> <M> Compare revision N with M - - Revisions: - 0 2019-03-20 20:57:22 root by boot-config-loader - 1 2019-03-15 20:00:04 root by boot-config-loader - 2 2019-03-05 01:58:39 vyos by cli - 3 2019-03-05 01:54:59 vyos by cli - 4 2019-03-05 01:53:08 vyos by cli - 5 2019-03-05 01:52:21 vyos by cli - 6 2019-02-24 21:01:24 root by boot-config-loader - 7 2019-02-21 22:00:12 vyos by cli - 8 2019-02-21 21:56:49 vyos by cli - - -Copy -^^^^ - -The ``copy`` command allows you to copy a configuration object. - -Copy the configuration entrys from a firewall name WAN rule 1 to rule 2. - -.. code-block:: none - - [edit firewall name WAN] - vyos@vyos# show - rule 1 { - action accept - source { - address 10.1.0.0/24 - } - } - [edit firewall name WAN] - vyos@vyos# copy rule 1 to rule 2 - [edit firewall name WAN] - vyos@vyos# show - rule 1 { - action accept - source { - address 10.1.0.0/24 - } - } - +rule 2 { - + action accept - + source { - + address 10.1.0.0/24 - + } - +} - -Delete -^^^^^^ - -The ``delte`` command is to delete a configuration entry. - -This Example delete the hole ``service tftp-server`` section. - -.. code-block:: none - - delete service tftp-server - -Discard -^^^^^^^ - -The ``discard`` command removes all pending configuration changes. - -.. code-block:: none - - [edit] - vyos@vyos# discard - - Changes have been discarded - -Edit -^^^^ - -The ``edit`` command allows you to navigate down into the configuration tree. - -To avoid writing or pasting long paths, -you can set the edit level to any node with the "edit" command, -such as "edit firewall name Foo". -Once you are at some level, you can use relative node paths, -such as "set rule 10 action accept" in this case. - -To get back to an upper level, use the ``up`` command or use the ``top`` command to get back to the upper most level. -The ``[edit]`` text displays where the user is located in the configuration tree. - -.. code-block:: none - - vyos@vyos# edit firewall name Foo - - [edit firewall name Foo] - - vyos@vyos# set rule 10 protocol tcp - - [edit firewall name Foo] - - vyos@vyos# edit rule 10 - - [edit firewall name Foo rule 10] - - vyos@vyos# set destination port 22 - - [edit firewall name Foo rule 10] - - vyos@vyos# up - - [edit firewall name Foo] - - vyos@vyos# set rule 10 description "Allow SSH" - - [edit firewall name Foo] - - vyos@vyos# top - - [edit] - -Exit -^^^^ - -The ``exit`` command exits the current configuration mode. If the current configuration level isn't the top-most, then the configuration level is put back to the top-most level. -If the configuration level is at the top-most level, then it exits the configuration mode and returns to operational mode. -The ``exit`` command cannot be used if uncommitted changes exists in the configuration file. To exit with uncommitted changes, you either need to use the ``exit discard`` command or you need to commit the changes before exiting. -The ``exit`` command doesn't save the configuration, only the ``save`` command does. A warning will be given when exiting with unsaved changes. Using the ``exit`` command in operational mode will logout the session. - - -Exiting from a configuration level: - - -.. code-block:: none - - [edit interfaces ethernet eth0] - vyos@vyos# exit - -Exiting from configuration mode: - -.. code-block:: none - - [edit] - vyos@vyos# exit - exit - vyos@vyos:~$ - -Exiting from operational mode: - -.. code-block:: none - - vyos@vyos:~$ exit - logout - -Error message when trying to exit with uncommitted changes: - -.. code-block:: none - - vyos@vyos# exit - Cannot exit: configuration modified. - Use 'exit discard' to discard the changes and exit. - - -Warning message when exiting with unsaved changes: - -.. code-block:: none - - [edit] - vyos@vyos# exit - Warning: configuration changes have not been saved. - -Load -^^^^ - -The ``load`` command load a configuration from a local or remote file. You have to be use ``commit`` to make the change active - -.. code-block:: none - - <Enter> Load from system config file - <file> Load from file on local machine - scp://<user>:<passwd>@<host>/<file> Load from file on remote machine - sftp://<user>:<passwd>@<host>/<file> Load from file on remote machine - ftp://<user>:<passwd>@<host>/<file> Load from file on remote machine - http://<host>/<file> Load from file on remote machine - https://<host>/<file> Load from file on remote machine - tftp://<host>/<file> Load from file on remote machine - - -.. code-block:: none - - [edit] - vyos@vyos# load - Loading configuration from '/config/config.boot'... - - Load complete. Use 'commit' to make changes active. - - -Loadkey -^^^^^^^^ - -Copies the content of a public key to the ~/.ssh/authorized_keys file. - -.. code-block:: none - - loadkey <username> [tab] - - <file> Load from file on local machine - scp://<user>@<host>/<file> Load from file on remote machine - sftp://<user>@<host>/<file> Load from file on remote machine - ftp://<user>@<host>/<file> Load from file on remote machine - http://<host>/<file> Load from file on remote machine - tftp://<host>/<file> Load from file on remote machine - -Merge -^^^^^ - -The ``merge`` command merge the config from a local or remote file with the running config. - -In the example below exist a ``default-firewall.config`` file with some common firewall rules you saved earlier. - -.. code-block:: none - - [edit] - vyos@vyos# show firewall - Configuration under specified path is empty - [edit] - vyos@vyos# merge default-firewall.config - Loading configuration from '/config/default-firewall.config'... - - Merge complete. Use 'commit' to make changes active. - - vyos@vyos# show firewall - +all-ping enable - +broadcast-ping disable - +config-trap disable - +ipv6-receive-redirects disable - +ipv6-src-route disable - +ip-src-route disable - +log-martians enable - +name WAN { - + default-action drop - + rule 1 { - + action accept - + source { - + address 10.1.0.0/24 - + } - + } - + rule 2 { - + action accept - + source { - + address 10.1.0.0/24 - + } - ...... - - -Rename -^^^^^^ - -The ``rename`` command allows you to rename or move a configuration object. - -See here how to move the configuration entrys from vlanid 3 to 2 - -.. code-block:: none - - [edit interfaces ethernet eth1] - vyos@vyos# show - duplex auto - hw-id 00:53:22:81:c6:59 - smp-affinity auto - speed auto - vif 3 { - address 10.4.4.4/32 - } - [edit interfaces ethernet eth1] - vyos@vyos# rename vif 3 to vif 2 - [edit interfaces ethernet eth1] - vyos@vyos# show - duplex auto - hw-id 00:53:22:81:c6:59 - smp-affinity auto - speed auto - +vif 2 { - + address 10.4.4.4/32 - +} - -vif 3 { - - address 10.4.4.4/32 - -} - [edit interfaces ethernet eth1] - - -Rollback -^^^^^^^^ - -You can ``rollback`` configuration using the rollback command, however this command will currently trigger a system reboot. -Use the compare command to verify the configuration you want to rollback to. - -.. code-block:: none - - vyos@vyos# compare 1 - [edit system] - >host-name vyos-1 - [edit] - vyos@vyos# rollback 1 - Proceed with reboot? [confirm][y] - - Broadcast message from root@vyos-1 (pts/0) (Tue Dec 17 21:07:45 2018): - - The system is going down for reboot NOW! - -Run -^^^ - -The ``run`` command allows you to execute any operational mode commands without exiting the configuration session. - -.. code-block:: none - - [edit] - vyos@vyos# run show interfaces - Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down - Interface IP Address S/L Description - --------- ---------- --- ----------- - eth0 10.1.1.1/24 u/u - - -Save -^^^^ - -The ``save`` command saves the current configuration to non-volatile storage. VyOS also supports saving and loading configuration remotely using SCP, FTP, or TFTP. - -.. code-block:: none - - <Enter> Save to system config file - <file> Save to file on local machine - scp://<user>:<passwd>@<host>/<file> Save to file on remote machine - sftp://<user>:<passwd>@<host>/<file> Save to file on remote machine - ftp://<user>:<passwd>@<host>/<file> Save to file on remote machine - tftp://<host>/<file> Save to file on remote machine - -Set -^^^ - -The ``set`` command create all configuration entrys - -.. code-block:: none - - [edit] - vyos@vyos# set protocols static route 0.0.0.0/0 next-hop 192.168.1.1 - -Show -^^^^ - -The ``show`` command in the configuration mode displays the configuration and show uncommitted changes. - -Show the hole config, the address and description of eth1 is moving to vlan 2 if you commit the changes. - -.. code-block:: none - - [edit] - vyos@vyos# show - interfaces { - dummy dum0 { - address 10.3.3.3/24 - } - ethernet eth0 { - address dhcp - duplex auto - hw-id 00:53:22:2b:c0:0b - smp-affinity auto - speed auto - } - ethernet eth1 { - - address 10.1.1.1/32 - - description "MGMT Interface" - duplex auto - hw-id 00:53:22:81:c6:59 - smp-affinity auto - speed auto - + vif 2 { - + address 10.1.1.1/32 - + description "MGMT Interface" - + } - } - loopback lo { - } - } - service { - ssh { - port 22 - ...... diff --git a/docs/appendix/commandtree/index.rst b/docs/appendix/commandtree/index.rst deleted file mode 100644 index a35aab27..00000000 --- a/docs/appendix/commandtree/index.rst +++ /dev/null @@ -1,13 +0,0 @@ -.. _commandtree: - -Command tree -============ - -See full command tree in Operational mode and Configuration mode - -.. toctree:: - :maxdepth: 2 - :hidden: - - operationmode - configmode diff --git a/docs/appendix/commandtree/operationmode.rst b/docs/appendix/commandtree/operationmode.rst deleted file mode 100644 index 8092f248..00000000 --- a/docs/appendix/commandtree/operationmode.rst +++ /dev/null @@ -1,444 +0,0 @@ -.. _commandtree_operationmode: - -Operational mode ----------------- - -Operational mode allows for commands to perform operational system tasks and view system and service status. -After this is the first view after the login. -Please see :ref:`cli` for navigation in the CLI - - -.. code-block:: none - - - vyos@vyos:~$ [tab] - Possible completions: - add Add an object to a service - clear Clear system information - clone Clone an object - configure Enter configure mode - connect Establish a connection - copy Copy an object - delete Delete an object - disconnect Take down a connection - force Force an operation - format Format a device - generate Generate an object - install Install a new system - monitor Monitor system information - ping Send IPv4 or IPv6 ICMP (Internet Control Message Protocol) echo requests - poweroff Poweroff the system - reboot Reboot the system - release Release specified variable - rename Rename an object - renew Renew specified variable - reset Reset a service - restart Restart a service - set Set operational options - show Show system information - telnet Telnet to a node - traceroute Track network path to node - update Update data for a service - - -Add -^^^ - -.. code-block:: none - - raid Add a RAID set element - system Add an item to a system facility - -Clear -^^^^^ - -.. code-block:: none - - console Clear screen - firewall Clear firewall statistics - flow-accounting Clear flow accounting - interfaces Clear interface information - ip Clear Internet Protocol (IP) statistics or status - ipv6 Clear Internet Protocol (IPv6) statistics or status - nat Clear network address translation (NAT) tables - policy Clear policy statistics - - -Clone -^^^^^ -The ``clone`` command allows you to clone a configuration from a system image to another one, or from the running config to another system image. -To clone the running config to a system image: - -.. code-block:: none - - clone system config <system-image> from running - -To clone from system image A to system image B: - -.. code-block:: none - - clone system config <system-image-B> from <system-image-A> - - -Configure -^^^^^^^^^ - -The ``configure`` command allows you to enter configuration mode. - -.. code-block:: none - - vyos@vyos:~$ configure - [edit] - vyos@vyos# - - -Connect -^^^^^^^ - -The ``connect`` command allows you to bring up a connection oriented interface, like a pppoe interface. - -.. code-block:: none - - connect interface <interface> - -Copy -^^^^ - -The ``copy`` command allows you to copy a file to your running config or over images. - -It can look like this example: - -.. code-block:: none - - vyos@vyos:~$ copy file [tab] - Possible completions: - http://<user>:<passwd>@<host>/<file> - Copy files from specified source - scp://<user>:<passwd>@<host>/<file> - ftp://<user>:<passwd>@<host>/<file> - tftp://<host>/<file> - 1.2.0://config/ - 1.2.0-rolling+201902251818://config/ - 1.2.0-rolling+201902201040://config/ - 1.2.0-rolling+201902080337://config/ - 1.2.0-H4://config/ - running://config/ - - -To copy from file A to file B: - -.. code-block:: none - - copy <file A> to <file B> - - -Delete -^^^^^^ - -.. code-block:: none - - conntrack Delete Conntrack entries - file Delete files in a particular image - log Delete a log file - raid Remove a RAID set element - system Delete system objects - - -Disconnect -^^^^^^^^^^ - -The ``disconnect`` command allows you to take down a connection oriented interface, like a pppoe interface. - -.. code-block:: none - - disconnect interface <interface> - -Force -^^^^^ - -.. code-block:: none - - arp Send gratuitous ARP request or reply - cluster Force a cluster state transition - - -Format -^^^^^^ - -The ``format`` command allows you to format a disk the same way as another one. - -.. code-block:: none - - format disk <target> like <source> - -Generate -^^^^^^^^ - -.. code-block:: none - - openvpn OpenVPN key generation tool - ssh-server-key - Regenerate the host SSH keys and restart the SSH server - tech-support Generate tech-support archive - vpn VPN key generation utility - wireguard wireguard key generation utility - -Install -^^^^^^^ - -The ``install`` command allows you to install the system image on the disk. - -.. code-block:: none - - install image - - -Monitor -^^^^^^^ - -``monitor`` can be used to continually view what is happening on the router. - -.. code-block:: none - - bandwidth Monitor interface bandwidth in real time - bandwidth-test - Initiate or wait for bandwidth test - cluster Monitor clustering service - command Monitor an operational mode command (refreshes every 2 seconds) - conntrack-sync - Monitor conntrack-sync - content-inspection - Monitor Content-Inspection - dhcp Monitor Dynamic Host Control Protocol (DHCP) - dns Monitor a Domain Name Service (DNS) daemon - firewall Monitor Firewall - https Monitor the Secure Hypertext Transfer Protocol (HTTPS) service - lldp Monitor Link Layer Discovery Protocol (LLDP) daemon - log Monitor last lines of messages file - nat Monitor network address translation (NAT) - openvpn Monitor OpenVPN - protocol Monitor routing protocols - snmp Monitor Simple Network Management Protocol (SNMP) daemon - stop-all Stop all current background monitoring processes - traceroute Monitor the path to a destination in realtime - traffic Monitor traffic dumps - vpn Monitor VPN - vrrp Monitor Virtual Router Redundancy Protocol (VRRP) - webproxy Monitor Webproxy service - - -Ping -^^^^ - -The ``ping`` command allows you to send an ICMP-EchoRequest packet and display the ICMP-EchoReply received. - -.. code-block:: none - - <hostname> Send Internet Control Message Protocol (ICMP) echo request - <x.x.x.x> - <h:h:h:h:h:h:h:h> - - -Poweroff -^^^^^^^^ - -The ``poweroff`` command allows you to properly shut down the VyOS instance. Without any modifier, the command is executed immediately. - -.. code-block:: none - - <Enter> Execute the current command - at Poweroff at a specific time - cancel Cancel a pending poweroff - in Poweroff in X minutes - now Poweroff the system without confirmation - -Reboot -^^^^^^ -The ``reboot`` command allows you to properly restart the VyOS instance. Without any modifier, the command is executed immediately. - -.. code-block:: none - - <Enter> Execute the current command - at Poweroff at a specific time - cancel Cancel a pending poweroff - in Poweroff in X minutes - now Poweroff the system without confirmation - -Release -^^^^^^^ - -The ``release`` command allows you to release a DHCP or DHCPv6 lease. - -.. code-block:: none - - vyos@vyos:~$ release dhcp interface <int> - vyos@vyos:~$ release dhcpv6 interface <int> - - -Rename -^^^^^^ - -The ``rename`` command allows you to rename a system image. - -.. code-block:: none - - rename system image <currentname> <newname> - - -Renew -^^^^^ - -The ``renew`` command allows you to renew a DHCP or DHCPv6 lease. - -.. code-block:: none - - vyos@vyos:~$ renew dhcp interface <int> - vyos@vyos:~$ renew dhcpv6 interface <int> - -Reset -^^^^^ - -.. code-block:: none - - conntrack Reset all currently tracked connections - conntrack-sync - Reset connection syncing parameters - dns Reset a DNS service state - firewall reset a firewall group - ip Reset Internet Protocol (IP) parameters - ipv6 Reset Internet Protocol version 6 (IPv6) parameters - nhrp Clear/Purge NHRP entries - openvpn Reset OpenVPN - terminal Reset terminal - vpn Reset Virtual Private Network (VPN) information - -Restart -^^^^^^^ - -.. code-block:: none - - cluster Restart cluster node - conntrack-sync - Restart connection tracking synchronization service - dhcp Restart DHCP processes - dhcpv6 Restart DHCPv6 processes - dns Restart a DNS service - flow-accounting - Restart flow-accounting service - https Restart https server - vpn Restart IPsec VPN - vrrp Restart the VRRP (Virtual Router Redundancy Protocol) process - wan-load-balance - Restart WAN load balancing - webproxy Restart webproxy service - -Set -^^^ - -.. code-block:: none - - <OPTION> Bash builtin set command - console Control console behaviors - date Set system date and time - system Set system operational parameters - terminal Control terminal behaviors - -Show -^^^^ - -.. code-block:: none - - arp Show Address Resolution Protocol (ARP) information - bridge Show bridging information - cluster Show clustering information - configuration Show available saved configurations - conntrack Show conntrack entries in the conntrack table - conntrack-sync - Show connection syncing information - date Show system time and date - dhcp Show DHCP (Dynamic Host Configuration Protocol) information - dhcpv6 Show DHCPv6 (IPv6 Dynamic Host Configuration Protocol) information - disk Show status of disk device - dns Show DNS information - file Show files for a particular image - firewall Show firewall information - flow-accounting - Show flow accounting statistics - hardware Show system hardware details - history show command history - host Show host information - incoming Show ethernet input-policy information - interfaces Show network interface information - ip Show IPv4 routing information - ipv6 Show IPv6 routing information - license Show VyOS license information - lldp Show lldp - log Show contents of current master log file - login Show current login credentials - monitoring Show currently monitored services - nat Show Network Address Translation (NAT) information - nhrp Show NHRP info - ntp Show peer status of NTP daemon - openvpn Show OpenVPN information - policy Show policy information - poweroff Show scheduled poweroff - pppoe-server show pppoe-server status - queueing Show ethernet queueing information - raid Show statis of RAID set - reboot Show scheduled reboot - remote-config Show remote side config - route-map Show route-map information - snmp Show status of SNMP on localhost - system Show system information - system-integrity - checks the integrity of the system - table Show routing table - tech-support Show consolidated tech-support report (private information removed) - users Show user information - version Show system version information - vpn Show Virtual Private Network (VPN) information - vrrp Show VRRP (Virtual Router Redundancy Protocol) information - wan-load-balance - Show Wide Area Network (WAN) load-balancing information - webproxy Show webproxy information - wireguard Show wireguard properties - zone-policy Show summary of zone policy for a specific zone - -Telnet -^^^^^^ -In the past the ``telnet`` command allowed you to connect remotely to another device using the telnet protocol. -Telnet is unencrypted and should not use anymore. But its nice to test if an TCP Port to a host is open. - - -.. code-block:: none - - vyos@vyos:~$ telnet 192.168.1.3 443 - Trying 192.168.1.3... - telnet: Unable to connect to remote host: Network is unreachable - - vyos@vyos:~$ telnet 192.168.1.4 443 - Trying 192.168.1.4... - Connected to 192.168.1.4. - Escape character is '^]'. - -Traceroute -^^^^^^^^^^ - -The ``traceroute`` command allows you to trace the path taken to a particular device. - -.. code-block:: none - - <hostname> Track network path to specified node - <x.x.x.x> - <h:h:h:h:h:h:h:h> - ipv4 Track network path to <hostname|IPv4 address> - ipv6 Track network path to <hostname|IPv6 address> - - -Update -^^^^^^ - -.. code-block:: none - - dns Update DNS information - webproxy Update webproxy
\ No newline at end of file diff --git a/docs/index.rst b/docs/index.rst index 559d2a47..4ca73b99 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -56,7 +56,6 @@ VyOS User Guide appendix/release-notes appendix/examples/index appendix/cmd-index - appendix/commandtree/index appendix/vyos-on-vmware appendix/vyos-on-baremetal appendix/migrate-from-vyatta |