diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/configuration/vrf/index.rst | 59 |
1 files changed, 37 insertions, 22 deletions
diff --git a/docs/configuration/vrf/index.rst b/docs/configuration/vrf/index.rst index a47175f2..a311fcc0 100644 --- a/docs/configuration/vrf/index.rst +++ b/docs/configuration/vrf/index.rst @@ -23,8 +23,8 @@ then enslaved to a VRF device. .. cfgcmd:: set vrf name <name> - Create new VRF instance with `<name>`. The name is used when placing individual - interfaces into the VRF. + Create new VRF instance with `<name>`. The name is used when placing + individual interfaces into the VRF. .. cfgcmd:: set vrf name <name> table <id> @@ -50,7 +50,8 @@ Interfaces When VRFs are used it is not only mandatory to create a VRF but also the VRF itself needs to be assigned to an interface. -.. cfgcmd:: set interfaces <dummy | ethernet | bonding | bridge | pppoe> <interface> vrf <name> +.. cfgcmd:: set interfaces <dummy | ethernet | bonding | bridge | pppoe> + <interface> vrf <name> Assign interface identified by `<interface>` to VRF named `<name>`. @@ -79,11 +80,13 @@ Static Routes Configure next-hop `<address>` for an IPv4 static route in the VRF identified by `<name>`. Multiple static routes can be created. -.. cfgcmd:: set protocols vrf <name> static route <subnet> next-hop <address> disable +.. cfgcmd:: set protocols vrf <name> static route <subnet> next-hop <address> + disable Disable IPv4 static route entry in the VRF identified by `<name>` -.. cfgcmd:: set protocols vrf <name> static route <subnet> next-hop <address> distance <distance> +.. cfgcmd:: set protocols vrf <name> static route <subnet> next-hop <address> + distance <distance> Defines next-hop distance for this route, routes with smaller administrative distance are elected prior those with a higher distance. @@ -95,11 +98,13 @@ Static Routes Configure next-hop `<address>` for an IPv6 static route in the VRF identified by `<name>`. Multiple IPv6 static routes can be created. -.. cfgcmd:: set protocols vrf <name> static route6 <subnet> next-hop <address> disable +.. cfgcmd:: set protocols vrf <name> static route6 <subnet> next-hop <address> + disable Disable IPv6 static route entry in the VRF identified by `<name>`. -.. cfgcmd:: set protocols vrf <name> static route6 <subnet> next-hop <address> distance <distance> +.. cfgcmd:: set protocols vrf <name> static route6 <subnet> next-hop <address> + distance <distance> Defines next-hop distance for this route, routes with smaller administrative distance are elected prior those with a higher distance. @@ -113,14 +118,16 @@ Static Routes Leaking """"""" -.. cfgcmd:: set protocols vrf <name> static route <subnet> next-hop <address> next-hop-vrf <default | vrf-name> +.. cfgcmd:: set protocols vrf <name> static route <subnet> next-hop <address> + next-hop-vrf <default | vrf-name> Use this command if you have shared services or routes that should be shared between multiple VRF instances. This will add an IPv4 route to VRF `<name>` routing table to reach a `<subnet>` via a next-hop gatewys `<address>` in a different VRF or leak it into the default VRF. -.. cfgcmd:: set protocols vrf <name> static route6 <subnet> next-hop <address> next-hop-vrf <default | vrf-name> +.. cfgcmd:: set protocols vrf <name> static route6 <subnet> next-hop <address> + next-hop-vrf <default | vrf-name> Use this command if you have shared services or routes that should be shared between multiple VRF instances. This will add an IPv6 route to VRF `<name>` @@ -131,34 +138,40 @@ Leaking Interface Routes """""""""""""""" -.. cfgcmd:: set protocols vrf <name> static interface-route <subnet> next-hop-interface <interface> +.. cfgcmd:: set protocols vrf <name> static interface-route <subnet> + next-hop-interface <interface> Allows you to configure the next-hop interface for an interface-based IPv4 static route. `<interface>` will be the next-hop interface where trafic is routed for the given `<subnet>`. -.. cfgcmd:: set protocols vrf <name> static interface-route <subnet> next-hop-interface <interface> disable +.. cfgcmd:: set protocols vrf <name> static interface-route <subnet> + next-hop-interface <interface> disable Disables interface-based IPv4 static route. -.. cfgcmd:: set protocols vrf <name> static interface-route <subnet> next-hop-interface <interface> distance <distance> +.. cfgcmd:: set protocols vrf <name> static interface-route <subnet> + next-hop-interface <interface> distance <distance> Defines next-hop distance for this route, routes with smaller administrative distance are elected prior those with a higher distance. Range is 1 to 255, default is 1. -.. cfgcmd:: set protocols vrf <name> static interface-route6 <subnet> next-hop-interface <interface> +.. cfgcmd:: set protocols vrf <name> static interface-route6 <subnet> + next-hop-interface <interface> Allows you to configure the next-hop interface for an interface-based IPv6 static route. `<interface>` will be the next-hop interface where trafic is routed for the given `<subnet>`. -.. cfgcmd:: set protocols vrf <name> static interface-route6 <subnet> next-hop-interface <interface> disable +.. cfgcmd:: set protocols vrf <name> static interface-route6 <subnet> + next-hop-interface <interface> disable Disables interface-based IPv6 static route. -.. cfgcmd:: set protocols vrf <name> static interface-route6 <subnet> next-hop-interface <interface> distance <distance> +.. cfgcmd:: set protocols vrf <name> static interface-route6 <subnet> + next-hop-interface <interface> distance <distance> Defines next-hop distance for this route, routes with smaller administrative distance are elected prior those with a higher distance. @@ -176,7 +189,8 @@ Blackhole it does not prevent them from being used as a more specific route inside your network. -.. cfgcmd:: set protocols vrf <name> static route <subnet> blackhole distance <distance> +.. cfgcmd:: set protocols vrf <name> static route <subnet> blackhole distance + <distance> Defines blackhole distance for this route, routes with smaller administrative distance are elected prior those with a higher distance. @@ -189,7 +203,8 @@ Blackhole it does not prevent them from being used as a more specific route inside your network. -.. cfgcmd:: set protocols vrf <name> static route6 <subnet> blackhole distance <distance> +.. cfgcmd:: set protocols vrf <name> static route6 <subnet> blackhole distance + <distance> Defines blackhole distance for this route, routes with smaller administrative distance are elected prior those with a higher distance. @@ -210,11 +225,11 @@ For VR Fmaintenance the followin operational commands are in place. vyos@vyos:~$ show vrf VRF name state mac address flags interfaces -------- ----- ----------- ----- ---------- - blue up de:c4:83:d8:74:24 noarp,master,up,lower_up dum200,eth0.302 - red up be:36:ce:02:df:aa noarp,master,up,lower_up dum100,eth0.300,bond0.100,peth0 + blue up 00:53:12:d8:74:24 noarp,master,up,lower_up dum200,eth0.302 + red up 00:53:de:02:df:aa noarp,master,up,lower_up dum100,eth0.300,bond0.100,peth0 - .. note:: Command should probably be extended to list also the real interfaces - assigned to this one VRF to get a better overview. + .. note:: Command should probably be extended to list also the real + interfaces assigned to this one VRF to get a better overview. .. opcmd:: show vrf <name> @@ -223,7 +238,7 @@ For VR Fmaintenance the followin operational commands are in place. vyos@vyos:~$ show vrf name blue VRF name state mac address flags interfaces -------- ----- ----------- ----- ---------- - blue up de:c4:83:d8:74:24 noarp,master,up,lower_up dum200,eth0.302 + blue up 00:53:12:d8:74:24 noarp,master,up,lower_up dum200,eth0.302 .. opcmd:: show ip route vrf <name> |