diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/install.rst | 34 |
1 files changed, 17 insertions, 17 deletions
diff --git a/docs/install.rst b/docs/install.rst index 3e31449f..a210c1ad 100644 --- a/docs/install.rst +++ b/docs/install.rst @@ -190,7 +190,7 @@ it in your hard drive. **With your downloaded VyOS .iso file you can create a bootable USB drive that will let you boot into a fully functional VyOS system**. Once you have tested it, you can either decide to begin a :ref:`permanent_installation` in your hard drive or power -your system off, remove the USB drive, and leave everythng as it was. +your system off, remove the USB drive, and leave everythng as it was. If you have a GNU+Linux system, you can create your VyOS bootable USB @@ -206,8 +206,8 @@ stick with with the ``dd`` command: all partitions. .. code-block:: none - - $ umount /dev/sdX* + + $ umount /dev/sdX* 4. Write the image (your VyOS .iso file) to the USB drive. Note that here you want to use the device name (e.g. /dev/sdb), not @@ -216,7 +216,7 @@ stick with with the ``dd`` command: **Warning**: This will destroy all data on the USB drive! .. code-block:: none - + # dd if=/path/to/vyos.iso of=/dev/sdX bs=8M; sync 5. Wait until you get the outcome (bytes copied). Be patient, in some @@ -286,19 +286,19 @@ In order to proceed with a permanent installation: Would you like me to try to partition a drive automatically or would you rather partition it manually with parted? If you have already setup your partitions, you may skip this step - + Partition (Auto/Parted/Skip) [Auto]: - + I found the following drives on your system: sda 4294MB - + Install the image on? [sda]: - + This will destroy all data on /dev/sda. Continue? (Yes/No) [No]: Yes - + How big of a root partition should I create? (2000MB - 4294MB) [4294]MB: - + Creating filesystem on /dev/sda1: OK Done! Mounting /dev/sda1... @@ -310,7 +310,7 @@ In order to proceed with a permanent installation: I found the following configuration files: /opt/vyatta/etc/config.boot.default Which one should I copy to sda? [/opt/vyatta/etc/config.boot.default]: - + Copying /opt/vyatta/etc/config.boot.default to sda. Enter password for administrator account Enter password for user 'vyos': @@ -318,9 +318,9 @@ In order to proceed with a permanent installation: I need to install the GRUB boot loader. I found the following drives on your system: sda 4294MB - + Which drive should GRUB modify the boot partition on? [sda]: - + Setting up grub: OK Done! @@ -484,17 +484,17 @@ Known Issues This is a list of known issues that can arise during installation. Black screen on install -^^^^^^^^^^^^^^^^^^^^^^^ +----------------------- GRUB attempts to redirect all output to a serial port for ease of installation on headless hosts. -This appears to cause an hard lockup on some hardware that lacks a serial port, with the result being a +This appears to cause an hard lockup on some hardware that lacks a serial port, with the result being a black screen after selecting the `Live system` option from the installation image. The workaround is to type `e` when the boot menu appears and edit the GRUB boot options. Specifically, remove the: -`console=ttyS0,115200` +`console=ttyS0,115200` -option, and type CTRL-X to boot. +option, and type CTRL-X to boot. Installation can then continue as outlined above. |