diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/_include/interface-dhcpv6-options.txt | 4 | ||||
| -rw-r--r-- | docs/configuration/interfaces/openvpn.rst | 45 |
2 files changed, 47 insertions, 2 deletions
diff --git a/docs/_include/interface-dhcpv6-options.txt b/docs/_include/interface-dhcpv6-options.txt index a2361e11..e584f36b 100644 --- a/docs/_include/interface-dhcpv6-options.txt +++ b/docs/_include/interface-dhcpv6-options.txt @@ -14,8 +14,8 @@ .. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} {{ var5 }} {{ var6 }} dhcpv6-options no-release - When no-release is specified, dhcp6c will send a release message on client - exit to prevent losing an assigned address or prefix. + When no-release is specified, dhcp6c will avoid sending a release message on + client exit in order to prevent losing an assigned address or prefix. .. code-block:: none diff --git a/docs/configuration/interfaces/openvpn.rst b/docs/configuration/interfaces/openvpn.rst index 1dfe1fc5..dcfd9307 100644 --- a/docs/configuration/interfaces/openvpn.rst +++ b/docs/configuration/interfaces/openvpn.rst @@ -660,6 +660,51 @@ config file. The path and arguments need to be single- or double-quoted. quotes. This is done through a hack on our config generator. You can pass quotes using the ``"`` statement. +Server bridge +============= + +In Ethernet bridging configurations, OpenVPN's server mode can be set as a +'bridge' where the VPN tunnel encapsulates entire Ethernet frames +(up to 1514 bytes) instead of just IP packets (up to 1500 bytes). This setup +allows clients to transmit Layer 2 frames through the OpenVPN tunnel. Below, +we outline a basic configuration to achieve this: + + +Server Side: + +.. code-block:: none + + set interfaces bridge br10 member interface eth1.10 + set interfaces bridge br10 member interface vtun10 + set interfaces openvpn vtun10 device-type 'tap' + set interfaces openvpn vtun10 encryption data-ciphers 'aes192' + set interfaces openvpn vtun10 hash 'sha256'' + set interfaces openvpn vtun10 local-host '172.18.201.10' + set interfaces openvpn vtun10 local-port '1194' + set interfaces openvpn vtun10 mode 'server' + set interfaces openvpn vtun10 server bridge gateway '10.10.0.1' + set interfaces openvpn vtun10 server bridge start '10.10.0.100' + set interfaces openvpn vtun10 server bridge stop '10.10.0.200' + set interfaces openvpn vtun10 server bridge subnet-mask '255.255.255.0' + set interfaces openvpn vtun10 server topology 'subnet' + set interfaces openvpn vtun10 tls ca-certificate 'ca-1' + set interfaces openvpn vtun10 tls certificate 'srv-1' + set interfaces openvpn vtun10 tls dh-params 'srv-1' + +Client Side : + +.. code-block:: none + + set interfaces openvpn vtun10 device-type 'tap' + set interfaces openvpn vtun10 encryption data-ciphers 'aes192' + set interfaces openvpn vtun10 hash 'sha256'' + set interfaces openvpn vtun10 mode 'client' + set interfaces openvpn vtun10 protocol 'udp' + set interfaces openvpn vtun10 remote-host '172.18.201.10' + set interfaces openvpn vtun10 remote-port '1194' + set interfaces openvpn vtun10 tls ca-certificate 'ca-1' + set interfaces openvpn vtun10 tls certificate 'client-1' + *************************** Multi-factor Authentication *************************** |