From 0ae01b4a1c6e6376b2db498618c65801a809e826 Mon Sep 17 00:00:00 2001
From: Christian Poessinger <christian@poessinger.com>
Date: Fri, 5 Feb 2021 22:53:53 +0100
Subject: vrf: static: T2450: adjust to new CLI syntax

---
 docs/configexamples/azure-vpn-bgp.rst              |  2 +-
 docs/configexamples/azure-vpn-dual-bgp.rst         |  4 ++--
 .../dhcp-relay-through-gre-bridge.rst              |  4 ++--
 docs/configexamples/tunnelbroker-ipv6.rst          |  2 +-
 docs/configuration/interfaces/openvpn.rst          |  6 ++---
 docs/configuration/interfaces/pppoe.rst            |  4 ++--
 docs/configuration/interfaces/wireguard.rst        |  4 ++--
 docs/configuration/protocols/static.rst            | 12 +++++-----
 docs/configuration/vrf/index.rst                   | 28 +++++++++++-----------
 9 files changed, 33 insertions(+), 33 deletions(-)

diff --git a/docs/configexamples/azure-vpn-bgp.rst b/docs/configexamples/azure-vpn-bgp.rst
index 265e28c7..1d61b3b8 100644
--- a/docs/configexamples/azure-vpn-bgp.rst
+++ b/docs/configexamples/azure-vpn-bgp.rst
@@ -114,7 +114,7 @@ Vyos configuration
 
 .. code-block:: none
 
-  set protocols static interface-route 10.0.0.4/32 next-hop-interface vti1
+  set protocols static route 10.0.0.4/32 interface vti1
 
 - Configure your BGP settings
 
diff --git a/docs/configexamples/azure-vpn-dual-bgp.rst b/docs/configexamples/azure-vpn-dual-bgp.rst
index 13d4b5a2..0a48156c 100644
--- a/docs/configexamples/azure-vpn-dual-bgp.rst
+++ b/docs/configexamples/azure-vpn-dual-bgp.rst
@@ -129,8 +129,8 @@ Vyos configuration
 
 .. code-block:: none
 
-  set protocols static interface-route 10.0.0.4/32 next-hop-interface vti1
-  set protocols static interface-route 10.0.0.5/32 next-hop-interface vti2
+  set protocols static route 10.0.0.4/32 interface vti1
+  set protocols static route 10.0.0.5/32 interface vti2
 
 - Configure your BGP settings
 
diff --git a/docs/configexamples/dhcp-relay-through-gre-bridge.rst b/docs/configexamples/dhcp-relay-through-gre-bridge.rst
index 0db5fa0a..afa4d854 100644
--- a/docs/configexamples/dhcp-relay-through-gre-bridge.rst
+++ b/docs/configexamples/dhcp-relay-through-gre-bridge.rst
@@ -29,7 +29,7 @@ DHCP Server
    set protocols ospf area 0 network '192.168.3.0/24'
    set protocols ospf area 0 network '10.0.2.0/24'
    set protocols ospf parameters router-id '192.168.3.3'
-   set protocols static interface-route 10.0.1.2/32 next-hop-interface tun100
+   set protocols static route 10.0.1.2/32 interface tun100
    set service dhcp-server shared-network-name asdf authoritative
    set service dhcp-server shared-network-name asdf subnet 192.168.3.0/24 range 0 start '192.168.3.30'
    set service dhcp-server shared-network-name asdf subnet 192.168.3.0/24 range 0 stop '192.168.3.40'
@@ -70,7 +70,7 @@ DHCP Relay
    set protocols ospf area 0 network '192.168.0.0/24'
    set protocols ospf area 0 network '10.100.100.0/24'
    set protocols ospf parameters router-id '10.100.100.1'
-   set protocols static interface-route 192.168.3.3/32 next-hop-interface tun100
+   set protocols static route 192.168.3.3/32 interface tun100
    set service dhcp-relay interface 'eth0'
    set service dhcp-relay interface 'tun100'
    set service dhcp-relay server '192.168.3.3'
diff --git a/docs/configexamples/tunnelbroker-ipv6.rst b/docs/configexamples/tunnelbroker-ipv6.rst
index b6f1cc07..1df814dc 100644
--- a/docs/configexamples/tunnelbroker-ipv6.rst
+++ b/docs/configexamples/tunnelbroker-ipv6.rst
@@ -35,7 +35,7 @@ tunnel information page.
   set interfaces tunnel tun0 mtu '1472'
   set interfaces tunnel tun0 multicast 'disable'
   set interfaces tunnel tun0 remote-ip Server_IPv4_from_Tunnelbroker  # This is the IP of the Tunnelbroker server
-  set protocols static interface-route6 ::/0 next-hop-interface tun0  # Tell all traffic to go over this tunnel
+  set protocols static route6 ::/0 interface tun0  # Tell all traffic to go over this tunnel
   commit
 
 If your WAN connection is over PPPoE, you may need to set the MTU on the above
diff --git a/docs/configuration/interfaces/openvpn.rst b/docs/configuration/interfaces/openvpn.rst
index 2c273b34..8b32743f 100644
--- a/docs/configuration/interfaces/openvpn.rst
+++ b/docs/configuration/interfaces/openvpn.rst
@@ -159,13 +159,13 @@ Local Configuration:
 
 .. code-block:: none
 
-  set protocols static interface-route 10.1.0.0/16 next-hop-interface vtun1
+  set protocols static route 10.1.0.0/16 interface vtun1
 
 Remote Configuration:
 
 .. code-block:: none
 
-  set protocols static interface-route 10.0.0.0/16 next-hop-interface vtun1
+  set protocols static route 10.0.0.0/16 interface vtun1
 
 Firewall policy can also be applied to the tunnel interface for `local`, `in`,
 and `out` directions and function identically to ethernet interfaces.
@@ -253,7 +253,7 @@ internally, so we need to create a route to the 10.23.0.0/20 network ourselves:
 
 .. code-block:: none
 
-  set protocols static interface-route 10.23.0.0/20 next-hop-interface vtun10
+  set protocols static route 10.23.0.0/20 interface vtun10
 
 Generate X.509 Certificate and Keys
 -----------------------------------
diff --git a/docs/configuration/interfaces/pppoe.rst b/docs/configuration/interfaces/pppoe.rst
index 0fdbba42..1bbccc0c 100644
--- a/docs/configuration/interfaces/pppoe.rst
+++ b/docs/configuration/interfaces/pppoe.rst
@@ -130,7 +130,7 @@ PPPoE options
 
 .. note:: In all modes except 'none', all default routes using this interface
    will be removed when the interface is torn down - even manually installed
-   static interface-routes.
+   static routes.
 
 .. cfgcmd:: set interfaces pppoe <interface> idle-timeout <time>
 
@@ -251,7 +251,7 @@ Requirements:
   default gateway you receive from your DSL ISP to the routing table if you
   have no other WAN connections. If you wish to use a dual WAN connection,
   change the ``default-route`` option to ``force``.  You could also install
-  a static interface-route and set the ``default-route`` option to ``none``.
+  a static route and set the ``default-route`` option to ``none``.
 * With the ``name-server`` option set to ``none``, VyOS will ignore the
   nameservers your ISP sens you and thus you can fully rely on the ones you
   have configured statically.
diff --git a/docs/configuration/interfaces/wireguard.rst b/docs/configuration/interfaces/wireguard.rst
index c4dfbee7..852ff520 100644
--- a/docs/configuration/interfaces/wireguard.rst
+++ b/docs/configuration/interfaces/wireguard.rst
@@ -78,7 +78,7 @@ one.
   set interfaces wireguard wg01 peer to-wg02 port '12345'
   set interfaces wireguard wg01 peer to-wg02 pubkey 'XMrlPykaxhdAAiSjhtPlvi30NVkvLQliQuKP7AI7CyI='
   set interfaces wireguard wg01 port '12345'
-  set protocols static interface-route 10.2.0.0/24 next-hop-interface wg01
+  set protocols static route 10.2.0.0/24 interface wg01
 
 The last step is to define an interface route for 10.2.0.0/24 to get
 through the WireGuard interface `wg01`. Multiple IPs or networks can be
@@ -113,7 +113,7 @@ the public key, which needs to be shared with the peer.
   set interfaces wireguard wg01 peer to-wg02 port '12345'
   set interfaces wireguard wg01 peer to-wg02 pubkey 'u41jO3OF73Gq1WARMMFG7tOfk7+r8o8AzPxJ1FZRhzk='
   set interfaces wireguard wg01 port '12345'
-  set protocols static interface-route 10.1.0.0/24 next-hop-interface wg01
+  set protocols static route 10.1.0.0/24 interface wg01
 
 Assure that your firewall rules allow the traffic, in which case you
 have a working VPN using WireGuard
diff --git a/docs/configuration/protocols/static.rst b/docs/configuration/protocols/static.rst
index 42c0c4b7..723db727 100644
--- a/docs/configuration/protocols/static.rst
+++ b/docs/configuration/protocols/static.rst
@@ -63,19 +63,19 @@ Static Routes
 Interface Routes
 ================
 
-.. cfgcmd:: set protocols static interface-route <subnet> next-hop-interface
+.. cfgcmd:: set protocols static route <subnet> interface
    <interface>
 
    Allows you to configure the next-hop interface for an interface-based IPv4
    static route. `<interface>` will be the next-hop interface where trafic is
    routed for the given `<subnet>`.
 
-.. cfgcmd:: set protocols static interface-route <subnet> next-hop-interface
+.. cfgcmd:: set protocols static route <subnet> interface
    <interface> disable
 
    Disables interface-based IPv4 static route.
 
-.. cfgcmd:: set protocols static interface-route <subnet> next-hop-interface
+.. cfgcmd:: set protocols static route <subnet> interface
    <interface> distance <distance>
 
    Defines next-hop distance for this route, routes with smaller administrative
@@ -83,19 +83,19 @@ Interface Routes
 
    Range is 1 to 255, default is 1.
 
-.. cfgcmd:: set protocols static interface-route6 <subnet> next-hop-interface
+.. cfgcmd:: set protocols static route6 <subnet> interface
    <interface>
 
    Allows you to configure the next-hop interface for an interface-based IPv6
    static route. `<interface>` will be the next-hop interface where trafic is
    routed for the given `<subnet>`.
 
-.. cfgcmd:: set protocols static interface-route6 <subnet> next-hop-interface
+.. cfgcmd:: set protocols static route6 <subnet> interface
    <interface> disable
 
    Disables interface-based IPv6 static route.
 
-.. cfgcmd:: set protocols static interface-route6 <subnet> next-hop-interface
+.. cfgcmd:: set protocols static route6 <subnet> interface
    <interface> distance <distance>
 
    Defines next-hop distance for this route, routes with smaller administrative
diff --git a/docs/configuration/vrf/index.rst b/docs/configuration/vrf/index.rst
index a311fcc0..244784de 100644
--- a/docs/configuration/vrf/index.rst
+++ b/docs/configuration/vrf/index.rst
@@ -119,7 +119,7 @@ Leaking
 """""""
 
 .. cfgcmd:: set protocols vrf <name> static route <subnet> next-hop <address>
-   next-hop-vrf <default | vrf-name>
+   vrf <default | vrf-name>
 
    Use this command if you have shared services or routes that should be shared
    between multiple VRF instances. This will add an IPv4 route to VRF `<name>`
@@ -127,7 +127,7 @@ Leaking
    a different VRF or leak it into the default VRF.
 
 .. cfgcmd:: set protocols vrf <name> static route6 <subnet> next-hop <address>
-   next-hop-vrf <default | vrf-name>
+   vrf <default | vrf-name>
 
    Use this command if you have shared services or routes that should be shared
    between multiple VRF instances. This will add an IPv6 route to VRF `<name>`
@@ -138,40 +138,40 @@ Leaking
 Interface Routes
 """"""""""""""""
 
-.. cfgcmd:: set protocols vrf <name> static interface-route <subnet>
-   next-hop-interface <interface>
+.. cfgcmd:: set protocols vrf <name> static route <subnet>
+   interface <interface>
 
    Allows you to configure the next-hop interface for an interface-based IPv4
    static route. `<interface>` will be the next-hop interface where trafic is
    routed for the given `<subnet>`.
 
-.. cfgcmd:: set protocols vrf <name> static interface-route <subnet>
-   next-hop-interface <interface> disable
+.. cfgcmd:: set protocols vrf <name> static route <subnet>
+   interface <interface> disable
 
    Disables interface-based IPv4 static route.
 
-.. cfgcmd:: set protocols vrf <name> static interface-route <subnet>
-   next-hop-interface <interface> distance <distance>
+.. cfgcmd:: set protocols vrf <name> static route <subnet>
+   interface <interface> distance <distance>
 
    Defines next-hop distance for this route, routes with smaller administrative
    distance are elected prior those with a higher distance.
 
    Range is 1 to 255, default is 1.
 
-.. cfgcmd:: set protocols vrf <name> static interface-route6 <subnet>
-   next-hop-interface <interface>
+.. cfgcmd:: set protocols vrf <name> static route6 <subnet>
+   interface <interface>
 
    Allows you to configure the next-hop interface for an interface-based IPv6
    static route. `<interface>` will be the next-hop interface where trafic is
    routed for the given `<subnet>`.
 
-.. cfgcmd:: set protocols vrf <name> static interface-route6 <subnet>
-   next-hop-interface <interface> disable
+.. cfgcmd:: set protocols vrf <name> static route6 <subnet>
+   interface <interface> disable
 
    Disables interface-based IPv6 static route.
 
-.. cfgcmd:: set protocols vrf <name> static interface-route6 <subnet>
-   next-hop-interface <interface> distance <distance>
+.. cfgcmd:: set protocols vrf <name> static route6 <subnet>
+   interface <interface> distance <distance>
 
    Defines next-hop distance for this route, routes with smaller administrative
    distance are elected prior those with a higher distance.
-- 
cgit v1.2.3