From 48ac071fe099c40d79849bedc01d2b1bcefc7bad Mon Sep 17 00:00:00 2001 From: ekhudiyev <88712424+ekhudiyev@users.noreply.github.com> Date: Fri, 10 Dec 2021 17:17:55 +0400 Subject: Interim commit for saving changes. --- docs/configexamples/dual-hub-dmvpn.rst | 174 ++++++++++++++++++++++++++------- 1 file changed, 136 insertions(+), 38 deletions(-) diff --git a/docs/configexamples/dual-hub-dmvpn.rst b/docs/configexamples/dual-hub-dmvpn.rst index dd265fa9..f103972e 100644 --- a/docs/configexamples/dual-hub-dmvpn.rst +++ b/docs/configexamples/dual-hub-dmvpn.rst @@ -10,7 +10,7 @@ and management of the newly added remote sites. There are 3 main protocols primarily used to implement DMVPN: * NHRP - provides the dynamic tunnel endpoint discovery mechanism (endpoint -registration, and endpoint discovery/lookup) + registration, and endpoint discovery/lookup) * mGRE - provides the tunnel encapsulation itself * IPSec - protocols handle the key exchange, and crypto mechanism @@ -45,17 +45,27 @@ Network Addressing and Protocol Parameters The following ip addressing schema used for the devices IPv4 connectivity: -10.X1.0.0/30 - p2p Hubs to ISP networks, where X is Hub site number -10.Y1.1.0/24 - p2p Spokes to ISP networks(DHCP), where Y is Spoke site number -172.16.253.0/29 - tunnels addressing for Hub-1 connections -172.16.254.0/29 - tunnels addressing for Hub-2 connections -192.168.0.0/24 - HQ site local network -192.168.Z.0/24 - remote sites local network, where Z is Spoke site number ++-----------------------------------------------------------------------------+ +|10.X1.0.0/30 - p2p Hubs to ISP networks, where X is Hub site number | ++-----------------------------------------------------------------------------+ +|10.Y1.1.0/24 - p2p Spokes to ISP networks(DHCP), where Y is Spoke site number| ++-----------------------------------------------------------------------------+ +|172.16.253.0/29 - tunnels addressing for Hub-1 connections | ++-----------------------------------------------------------------------------+ +|172.16.254.0/29 - tunnels addressing for Hub-2 connections | ++-----------------------------------------------------------------------------+ +|192.168.0.0/24 - HQ site local network | ++-----------------------------------------------------------------------------+ +|192.168.Z.0/24 - remote sites local network, where Z is Spoke site number | ++-----------------------------------------------------------------------------+ eBGP parameters for the routers: -AS65000 - HQ (Hub-1 and Hub-2) -AS6500X - Spokes, where X is Spoke site number ++----------------------------------------------+ +|AS65000 - HQ (Hub-1 and Hub-2) | ++----------------------------------------------+ +|AS6500X - Spokes, where X is Spoke site number| ++----------------------------------------------+ @@ -65,38 +75,126 @@ Configuration -Step-1: Configuring IGP and enabling MPLS LDP -============================================= +Step-1: Basic connectivity configuration +======================================== -At the first step we need to configure the IP/MPLS backbone network using OSPF as -IGP protocol and LDP as label-switching protocol for the base connectivity between -**P** (rovider), **P** (rovider) **E** (dge) and **R** (oute) **R** (eflector) nodes: +- Hub-1: -- VyOS-P1: +.. code-block:: none + + set interfaces ethernet eth0 address '10.11.0.1/30' + set interfaces ethernet eth1 address '192.168.0.1/24' + set protocols static route 0.0.0.0/0 next-hop 10.11.0.2 + set system host-name 'Hub-1' + +- Hub-2: + +.. code-block:: none + + set interfaces ethernet eth0 address '10.21.0.1/30' + set interfaces ethernet eth1 address '192.168.0.2/24' + set protocols static route 0.0.0.0/0 next-hop 10.21.0.2 + set system host-name 'Hub-2' + +- Spoke-1: .. code-block:: none - # interfaces - set interfaces dummy dum10 address '10.0.0.3/32' - set interfaces ethernet eth0 address '172.16.30.1/24' - set interfaces ethernet eth1 address '172.16.40.1/24' - set interfaces ethernet eth2 address '172.16.90.1/24' - set interfaces ethernet eth3 address '172.16.10.1/24' - set interfaces ethernet eth5 address '172.16.100.1/24' + set interfaces ethernet eth0 address 'dhcp' + set interfaces ethernet eth1 address '192.168.1.1/24' + set system host-name 'Spoke-1' + +- Spoke-2: + +.. code-block:: none - # protocols ospf+ldp - set protocols mpls interface 'eth1' - set protocols mpls interface 'eth2' - set protocols mpls interface 'eth3' - set protocols mpls interface 'eth5' - set protocols mpls interface 'eth0' - set protocols mpls ldp discovery transport-ipv4-address '10.0.0.3' - set protocols mpls ldp interface 'eth0' - set protocols mpls ldp interface 'eth1' - set protocols mpls ldp interface 'eth2' - set protocols mpls ldp interface 'eth3' - set protocols mpls ldp interface 'eth5' - set protocols mpls ldp router-id '10.0.0.3' - set protocols ospf area 0 network '0.0.0.0/0' - set protocols ospf parameters abr-type 'cisco' - set protocols ospf parameters router-id '10.0.0.3 + set interfaces ethernet eth0 address 'dhcp' + set interfaces ethernet eth1 address '192.168.2.1/24' + set system host-name 'Spoke-2' + +- Spoke-3: + +.. code-block:: none + + set interfaces ethernet eth0 address 'dhcp' + set interfaces ethernet eth1 address '192.168.3.1/24' + set system host-name 'Spoke-3' + +- ISP-1: + +.. code-block:: none + + set interfaces ethernet eth0 address '10.11.0.2/30' + set interfaces ethernet eth1 address '10.21.0.2/30' + set interfaces ethernet eth2 address '10.31.1.1/24' + set interfaces ethernet eth3 address '10.21.1.1/24' + set interfaces ethernet eth4 address '10.11.1.1/24' + set service dhcp-server shared-network-name SPK-1 authoritative + set service dhcp-server shared-network-name SPK-1 subnet 10.11.1.0/24 default-router '10.11.1.1' + set service dhcp-server shared-network-name SPK-1 subnet 10.11.1.0/24 range 1 start '10.11.1.10' + set service dhcp-server shared-network-name SPK-1 subnet 10.11.1.0/24 range 1 stop '10.11.1.100' + set service dhcp-server shared-network-name SPK-2 authoritative + set service dhcp-server shared-network-name SPK-2 subnet 10.21.1.0/24 default-router '10.21.1.1' + set service dhcp-server shared-network-name SPK-2 subnet 10.21.1.0/24 range 1 start '10.21.1.10' + set service dhcp-server shared-network-name SPK-2 subnet 10.21.1.0/24 range 1 stop '10.21.1.100' + set service dhcp-server shared-network-name SPK-3 authoritative + set service dhcp-server shared-network-name SPK-3 subnet 10.31.1.0/24 default-router '10.31.1.1' + set service dhcp-server shared-network-name SPK-3 subnet 10.31.1.0/24 range 1 start '10.31.1.10' + set service dhcp-server shared-network-name SPK-3 subnet 10.31.1.0/24 range 1 stop '10.31.1.100' + set system host-name 'ISP1' + + + +Step-2: VRRP configuration for HQ Local network redundancy +========================================================== + +Here we are using VRRP as a local redundancy protocol between Hub-1 and Hub-2. +Initially, Hub-1 operates as an Active and Hub-2 as a Standby router. +Additionally, health-check and script are used to track uplinks and properly +switch mastership between Hub nodes based on the upstream router +reachability (ISP-1). **Note, that before adding local paths to the scripts into +configuration, you have to create and make them executable first**. + +Hub-1 and Hub-2 VRRP health-check script: +_________________________________________ + +* /config/scripts/vrrp-check.sh + +.. code-block:: none + + TBC + +**Note**: some parts of the script might be dependent on your network topology +and connectivity. Be careful before using it on your own devices. + + +Hub-1 and Hub-2 VRRP configuration: +___________________________________ + +* Hub-1 + +.. code-block:: none + + set high-availability vrrp group HQ health-check failure-count '3' + set high-availability vrrp group HQ health-check interval '1' + set high-availability vrrp group HQ health-check script '/config/scripts/vrrp-check.sh' + set high-availability vrrp group HQ interface 'eth1' + set high-availability vrrp group HQ no-preempt + set high-availability vrrp group HQ priority '200' + set high-availability vrrp group HQ rfc3768-compatibility + set high-availability vrrp group HQ virtual-address '192.168.0.254/24' + set high-availability vrrp group HQ vrid '1' + +* Hub-2: + +.. code-block:: none + + set high-availability vrrp group HQ health-check failure-count '3' + set high-availability vrrp group HQ health-check interval '1' + set high-availability vrrp group HQ health-check script '/config/scripts/vrrp-check.sh' + set high-availability vrrp group HQ interface 'eth1' + set high-availability vrrp group HQ no-preempt + set high-availability vrrp group HQ priority '100' + set high-availability vrrp group HQ rfc3768-compatibility + set high-availability vrrp group HQ virtual-address '192.168.0.254/24' + set high-availability vrrp group HQ vrid '1' -- cgit v1.2.3