From 61acd8021f8ab7ca502412bc0796a55bf4f1b255 Mon Sep 17 00:00:00 2001 From: root Date: Fri, 16 Oct 2020 08:57:36 -0400 Subject: vxlan syntax correction: link and remote-port parameters are not available in rolling release Replaced "link" with "source-interface" and "remote-port" with "port" .. code-block:: none vyos@vyos# set int vxlan vxlan1 Possible completions: + address IP address description Interface specific description disable Administratively disable interface > firewall Firewall options group Multicast group address for VXLAN interface > ip IPv4 routing parameters > ipv6 IPv6 routing parameters mac Media Access Control (MAC) address mtu Maximum Transmission Unit (MTU) > policy Policy route options port Destination port of VXLAN tunnel (default: 8472) remote Remote address of VXLAN tunnel source-address VXLAN source address source-interface Physical interface used for connection vni Virtual Network Identifier --- docs/interfaces/vxlan.rst | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/docs/interfaces/vxlan.rst b/docs/interfaces/vxlan.rst index a11f4b62..bf3b6dee 100644 --- a/docs/interfaces/vxlan.rst +++ b/docs/interfaces/vxlan.rst @@ -230,7 +230,7 @@ traffic from. set interfaces bridge br241 member interface 'vxlan241' set interfaces vxlan vxlan241 group '239.0.0.241' - set interfaces vxlan vxlan241 link 'eth0' + set interfaces vxlan vxlan241 source-interface 'eth0' set interfaces vxlan vxlan241 vni '241' ! Our seconds vxlan interface @@ -239,7 +239,7 @@ traffic from. set interfaces bridge br242 member interface 'vxlan242' set interfaces vxlan vxlan242 group '239.0.0.242' - set interfaces vxlan vxlan242 link 'eth0' + set interfaces vxlan vxlan242 source-interface 'eth0' set interfaces vxlan vxlan242 vni '242' **Leaf3 configuration:** @@ -255,7 +255,7 @@ traffic from. set interfaces bridge br241 member interface 'vxlan241' set interfaces vxlan vxlan241 group '239.0.0.241' - set interfaces vxlan vxlan241 link 'eth0' + set interfaces vxlan vxlan241 source-interface 'eth0' set interfaces vxlan vxlan241 vni '241' ! Our seconds vxlan interface @@ -264,7 +264,7 @@ traffic from. set interfaces bridge br242 member interface 'vxlan242' set interfaces vxlan vxlan242 group '239.0.0.242' - set interfaces vxlan vxlan242 link 'eth0' + set interfaces vxlan vxlan242 source-interface 'eth0' set interfaces vxlan vxlan242 vni '242' As you can see, Leaf2 and Leaf3 configuration is almost identical. There are @@ -300,7 +300,7 @@ same on all Leafs that has this interface. .. code-block:: none - set interfaces vxlan vxlan241 link 'eth0' + set interfaces vxlan vxlan241 source-interface 'eth0' Sets the interface to listen for multicast packets on. Could be a loopback, not yet tested. @@ -314,7 +314,7 @@ multicast-address. .. code-block:: none - set interfaces vxlan vxlan241 remote-port 12345 + set interfaces vxlan vxlan241 port 12345 The destination port used for creating a VXLAN interface in Linux defaults to its pre-standard value of 8472 to preserve backwards compatibility. A @@ -331,7 +331,7 @@ set directly. Let's change the Multicast example from above: # leaf2 and leaf3 delete interfaces vxlan vxlan241 group '239.0.0.241' - delete interfaces vxlan vxlan241 link 'eth0' + delete interfaces vxlan vxlan241 source-interface 'eth0' # leaf2 set interface vxlan vxlan241 remote 10.1.3.3 @@ -340,4 +340,4 @@ set directly. Let's change the Multicast example from above: set interface vxlan vxlan241 remote 10.1.2.2 The default port udp is set to 8472. -It can be changed with ``set interface vxlan remote-port `` +It can be changed with ``set interface vxlan port `` -- cgit v1.2.3