From adf7e91c5dfe7020d0df48aa93c62abcd8ca482d Mon Sep 17 00:00:00 2001 From: James Simpson <10970100+jsimpso@users.noreply.github.com> Date: Sun, 21 Jan 2024 18:28:36 +0800 Subject: minor wording fixes / adjustments --- docs/configuration/firewall/index.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/configuration/firewall/index.rst b/docs/configuration/firewall/index.rst index 74d5bc20..5d9190d6 100644 --- a/docs/configuration/firewall/index.rst +++ b/docs/configuration/firewall/index.rst @@ -66,10 +66,10 @@ packetis processed at the **IP Layer**: can be filtered and controlled. Bear in mind that this traffic can be a new connection originated by a internal process running on VyOS router, such as NTP, or a response to traffic received externaly through - **inputt** (for example response to an ssh login attempt to the router). + **input** (for example response to an ssh login attempt to the router). This includes ipv4 and ipv6 filtering rules, defined in: - * ``set firewall ipv4 input filter ...``. + * ``set firewall ipv4 output filter ...``. * ``set firewall ipv6 output filter ...``. @@ -81,7 +81,7 @@ packetis processed at the **IP Layer**: destination...``. If the interface where the packet was received is part of a bridge, then -packetis processed at the **Bridge Layer**, which contains a basic setup for +the packet is processed at the **Bridge Layer**, which contains a basic setup for bridge filtering: * **Forward (Bridge)**: stage where traffic that is trespasing through the @@ -89,7 +89,7 @@ bridge filtering: * ``set firewall bridge forward filter ...``. -The main structure VyOS firewall cli is shown next: +The main structure of the VyOS firewall CLI is shown next: .. code-block:: none -- cgit v1.2.3