From c432da682bf117184729c36e84850d384ea34f49 Mon Sep 17 00:00:00 2001 From: Nicolas Vollmar Date: Tue, 14 May 2024 07:02:48 +0200 Subject: Fix lint issues --- docs/configuration/firewall/flowtables.rst | 3 +- docs/configuration/firewall/ipv4.rst | 19 +++-- docs/configuration/firewall/ipv6.rst | 25 ++++-- docs/configuration/service/pppoe-server.rst | 126 +++++++++++++++++----------- 4 files changed, 108 insertions(+), 65 deletions(-) diff --git a/docs/configuration/firewall/flowtables.rst b/docs/configuration/firewall/flowtables.rst index adecb26a..e8a5f2e8 100644 --- a/docs/configuration/firewall/flowtables.rst +++ b/docs/configuration/firewall/flowtables.rst @@ -17,7 +17,8 @@ can be done regarding flowtables. .. cfgcmd:: set firewall flowtables ... -From main structure defined in :doc:`Firewall Overview` +From main structure defined in +:doc:`Firewall Overview` in this section you can find detailed information only for the next part of the general structure: diff --git a/docs/configuration/firewall/ipv4.rst b/docs/configuration/firewall/ipv4.rst index cbd8df31..f7f98dc7 100644 --- a/docs/configuration/firewall/ipv4.rst +++ b/docs/configuration/firewall/ipv4.rst @@ -16,7 +16,8 @@ Configuration commands covered in this section: .. cfgcmd:: set firewall ipv4 ... -From main structure defined in :doc:`Firewall Overview` +From main structure defined in +:doc:`Firewall Overview` in this section you can find detailed information only for the next part of the general structure: @@ -955,13 +956,17 @@ Synproxy ******** Synproxy connections -.. cfgcmd:: set firewall ipv4 [input | forward] filter rule <1-999999> action synproxy -.. cfgcmd:: set firewall ipv4 [input | forward] filter rule <1-999999> protocol tcp -.. cfgcmd:: set firewall ipv4 [input | forward] filter rule <1-999999> synproxy tcp mss <501-65535> +.. cfgcmd:: set firewall ipv4 [input | forward] filter rule <1-999999> + action synproxy +.. cfgcmd:: set firewall ipv4 [input | forward] filter rule <1-999999> + protocol tcp +.. cfgcmd:: set firewall ipv4 [input | forward] filter rule <1-999999> + synproxy tcp mss <501-65535> Set TCP-MSS (maximum segment size) for the connection -.. cfgcmd:: set firewall ipv4 [input | forward] filter rule <1-999999> synproxy tcp window-scale <1-14> +.. cfgcmd:: set firewall ipv4 [input | forward] filter rule <1-999999> + synproxy tcp window-scale <1-14> Set the window scale factor for TCP window scaling @@ -1167,8 +1172,8 @@ Show Firewall log .. opcmd:: show log firewall ipv4 name rule Show the logs of all firewall; show all ipv4 firewall logs; show all logs - for particular hook; show all logs for particular hook and priority; show all logs - for particular custom chain; show logs for specific Rule-Set. + for particular hook; show all logs for particular hook and priority; + show all logs for particular custom chain; show logs for specific Rule-Set. Example Partial Config ====================== diff --git a/docs/configuration/firewall/ipv6.rst b/docs/configuration/firewall/ipv6.rst index e81e7c62..cbf18a7d 100644 --- a/docs/configuration/firewall/ipv6.rst +++ b/docs/configuration/firewall/ipv6.rst @@ -16,7 +16,8 @@ Configuration commands covered in this section: .. cfgcmd:: set firewall ipv6 ... -From main structure defined in :doc:`Firewall Overview` +From main structure defined in +:doc:`Firewall Overview` in this section you can find detailed information only for the next part of the general structure: @@ -373,10 +374,12 @@ There are a lot of matching criteria against which the packet can be tested. remain valid if the IPv6 prefix changes and the host portion of systems IPv6 address is static (for example, with SLAAC or `tokenised IPv6 addresses - `_) + `_) This functions for both individual addresses and address groups. + .. stop_vyoslinter .. code-block:: none # Match any IPv6 address with the suffix ::0000:0000:0000:beef @@ -388,6 +391,8 @@ There are a lot of matching criteria against which the packet can be tested. set firewall ipv6 forward filter rule 200 source group address-group WEBSERVERS set firewall ipv6 forward filter rule 200 source address-mask ::ffff:ffff:ffff:ffff + .. start_vyoslinter + .. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> source fqdn .. cfgcmd:: set firewall ipv6 input filter rule <1-999999> @@ -941,13 +946,17 @@ Synproxy ******** Synproxy connections -.. cfgcmd:: set firewall ipv6 [input | forward] filter rule <1-999999> action synproxy -.. cfgcmd:: set firewall ipv6 [input | forward] filter rule <1-999999> protocol tcp -.. cfgcmd:: set firewall ipv6 [input | forward] filter rule <1-999999> synproxy tcp mss <501-65535> +.. cfgcmd:: set firewall ipv6 [input | forward] filter rule <1-999999> + action synproxy +.. cfgcmd:: set firewall ipv6 [input | forward] filter rule <1-999999> + protocol tcp +.. cfgcmd:: set firewall ipv6 [input | forward] filter rule <1-999999> + synproxy tcp mss <501-65535> Set TCP-MSS (maximum segment size) for the connection -.. cfgcmd:: set firewall ipv6 [input | forward] filter rule <1-999999> synproxy tcp window-scale <1-14> +.. cfgcmd:: set firewall ipv6 [input | forward] filter rule <1-999999> + synproxy tcp window-scale <1-14> Set the window scale factor for TCP window scaling @@ -1167,8 +1176,8 @@ Show Firewall log .. opcmd:: show log firewall ipv6 name rule Show the logs of all firewall; show all ipv6 firewall logs; show all logs - for particular hook; show all logs for particular hook and priority; show all logs - for particular custom chain; show logs for specific Rule-Set. + for particular hook; show all logs for particular hook and priority; + show all logs for particular custom chain; show logs for specific Rule-Set. Example Partial Config ====================== diff --git a/docs/configuration/service/pppoe-server.rst b/docs/configuration/service/pppoe-server.rst index d9a16036..6d818c70 100644 --- a/docs/configuration/service/pppoe-server.rst +++ b/docs/configuration/service/pppoe-server.rst @@ -48,7 +48,8 @@ Configuring PPPoE Server Create `` for local authentication on this system. The users password will be set to ``. -.. cfgcmd:: set service pppoe-server client-ip-pool range +.. cfgcmd:: set service pppoe-server client-ip-pool + range Use this command to define the first IP address of a pool of addresses to be given to pppoe clients. If notation ``x.x.x.x-x.x.x.x``, @@ -84,7 +85,8 @@ accounts again. set service pppoe-server authentication mode radius -.. cfgcmd:: set service pppoe-server authentication radius server key +.. cfgcmd:: set service pppoe-server authentication radius + server key Configure RADIUS `` and its required shared `` for communicating with the RADIUS server. @@ -108,7 +110,8 @@ If you are using OSPF as IGP, always the closest interface connected to the RADIUS server is used. With VyOS 1.2 you can bind all outgoing RADIUS requests to a single source IP e.g. the loopback interface. -.. cfgcmd:: set service pppoe-server authentication radius source-address
+.. cfgcmd:: set service pppoe-server authentication radius + source-address
Source IPv4 address used in all RADIUS server queires. @@ -118,57 +121,70 @@ to a single source IP e.g. the loopback interface. RADIUS advanced options ======================= -.. cfgcmd:: set service pppoe-server authentication radius server port +.. cfgcmd:: set service pppoe-server authentication radius + server port Configure RADIUS `` and its required port for authentication requests. -.. cfgcmd:: set service pppoe-server authentication radius server fail-time