From f2556e12287dd36118267fb2d7bc36332d973dff Mon Sep 17 00:00:00 2001 From: Alex W Date: Sat, 4 May 2024 21:35:16 +0100 Subject: traffic-policy: Corrected spelling mistakes --- docs/configuration/trafficpolicy/index.rst | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/docs/configuration/trafficpolicy/index.rst b/docs/configuration/trafficpolicy/index.rst index ed63b21f..f99c2a66 100644 --- a/docs/configuration/trafficpolicy/index.rst +++ b/docs/configuration/trafficpolicy/index.rst @@ -368,7 +368,7 @@ are to be sent, they could get dropped when trying to get enqueued at the tail. This can happen if the queue has still not been able to release enough packets from its head. -This is the policy that requieres the lowest resources for the same +This is the policy that requires the lowest resources for the same amount of traffic. But **very likely you do not need it as you cannot get much from it. Sometimes it is used just to enable logging.** @@ -504,7 +504,7 @@ and increase `interval` to something around 150 ms. the number of sub-queues (default: 1024) into which packets are classified. -.. cfgcmd:: set qos policy fq-codel interval +.. cfgcmd:: set qos policy fq-codel interval Use this command to configure an fq-codel policy, set its name and the time period used by the control loop of CoDel to detect when a @@ -518,7 +518,7 @@ and increase `interval` to something around 150 ms. define a hard limit on the real queue size. When this limit is reached, new packets are dropped (default: 10240 packets). -.. cfgcmd:: set qos policy fq-codel target +.. cfgcmd:: set qos policy fq-codel target Use this command to configure an fq-codel policy, set its name, and define the acceptable minimum standing/persistent queue delay. This @@ -710,7 +710,7 @@ continuously, packets from lower priority classes will only be transmitted after traffic volume from higher priority classes decreases. -.. note:: In Priority Queue we do not define clases with a meaningless +.. note:: In Priority Queue we do not define classes with a meaningless class ID number but with a class priority number (1-7). The lower the number, the higher the priority. @@ -912,7 +912,7 @@ In principle, values must be Rate Control ------------ -| **Queueing discipline:** Tocken Bucket Filter. +| **Queueing discipline:** Token Bucket Filter. | **Applies to:** Outbound traffic. Rate-Control is a classless policy that limits the packet flow to a set -- cgit v1.2.3