From 865e4632a2f1dd52f443c072fda5c629dc38ac72 Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Fri, 27 Nov 2020 19:10:54 +0100 Subject: include: ipv6: combine autoconf and eui64 into a single file --- docs/_include/interface-ipv6-address.txt | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 docs/_include/interface-ipv6-address.txt (limited to 'docs/_include/interface-ipv6-address.txt') diff --git a/docs/_include/interface-ipv6-address.txt b/docs/_include/interface-ipv6-address.txt new file mode 100644 index 00000000..bde3f50d --- /dev/null +++ b/docs/_include/interface-ipv6-address.txt @@ -0,0 +1,30 @@ +.. cfgcmd:: set interfaces {{ var0 }} {{ var2 }} {{ var3 }} + {{ var5 }} {{ var6 }} ipv6 address autoconf + + :abbr:`SLAAC (Stateless Address Autoconfiguration)` :rfc:`4862`. IPv6 hosts + can configure themselves automatically when connected to an IPv6 network using + the Neighbor Discovery Protocol via :abbr:`ICMPv6 (Internet Control Message + Protocol version 6)` router discovery messages. When first connected to a + network, a host sends a link-local router solicitation multicast request for + its configuration parameters; routers respond to such a request with a router + advertisement packet that contains Internet Layer configuration parameters. + + .. note:: This method automatically disables IPv6 traffic forwarding on the + interface in question. + + Example: + + .. code-block:: none + + set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} ipv6 address autoconf + + +.. cfgcmd:: set interfaces {{ var0 }} {{ var2 }} {{ var3 }} + {{ var5 }} {{ var6 }} ipv6 address eui64 + + :abbr:`EUI-64 (64-Bit Extended Unique Identifier)` as specified in + :rfc:`4291` allows a host to assign iteslf a unique 64-Bit IPv6 address. + + .. code-block:: none + + set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} ipv6 address eui64 2001:db8:beef::/64 -- cgit v1.2.3