From 8c87d8f47ef80df181451dd282d3d07df33536cf Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Wed, 3 Oct 2018 10:34:59 +0200 Subject: Added DMVPN subchapter to VPN --- docs/ch09-vpn.rst | 409 +++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 408 insertions(+), 1 deletion(-) (limited to 'docs/ch09-vpn.rst') diff --git a/docs/ch09-vpn.rst b/docs/ch09-vpn.rst index b332c8a5..f6242ffa 100644 --- a/docs/ch09-vpn.rst +++ b/docs/ch09-vpn.rst @@ -407,5 +407,412 @@ rules. (if you used the default configuration at the top of this page) DMVPN ----- -Advanced DMVPN configuration examples are available on the [[DMVPN]] page. +**D** ynamic **M** ultipoint **V** irtual **P** rivate **N** etworking +DMVPN is a dynamic VPN technology originally developed by Cisco. While their +implementation was somewhat proprietary, the underlying technologies are +actually standards based. The three technologies are: + +* **NHRP** - NBMA Next Hop Resolution Protocol RFC2332_ +* **mGRE** - Multipoint Generic Routing Encapsulation / mGRE RFC1702_ +* **IPSec** - IP Security (too many RFCs to list, but start with RFC4301_) + +NHRP provides the dynamic tunnel endpoint discovery mechanism (endpoint +registration, and endpoint discovery/lookup), mGRE provides the tunnel +encapsulation itself, and the IPSec protocols handle the key exchange, and +crypto mechanism. + +In short, DMVPN provides the capability for creating a dynamic-mesh VPN +network without having to pre-configure (static) all possible tunnel end-point +peers. + +**NOTE:** DMVPN only automates the tunnel endpoint discovery and setup. A +complete solution also incorporates the use of a routing protocol. BGP is +particularly well suited for use with DMVPN. + +Baseline Configuration: + +**STEPS:** + +#. Create tunnel config (`interfaces tunnel`) +#. Create nhrp (`protocols nhrp`) +#. Create ipsec vpn (optional, but recommended for security) (`vpn ipsec`) + +The tunnel will be set to mGRE if for encapsulation `gre` is set, and no +`remote-ip` is set. If the public ip is provided by DHCP the tunnel `local-ip` +can be set to "0.0.0.0" + +.. figure:: images/Baseline-DMVPN-Topology.png + :scale: 40 % + :alt: Baseline DMVPN topology + + Baseline DMVPN topology + +HUB Configuration +^^^^^^^^^^^^^^^^^ + +.. code-block:: sh + + interfaces + tunnel { + address + encapsulation gre + local-ip + multicast enable + description + parameters { + ip { + + } + } + } + } + protocols { + nhrp { + tunnel { + cisco-authentication + holding-time + multicast dynamic + redirect + } + } + } + vpn { + ipsec { + esp-group { + lifetime <30-86400> + mode tunnel + pfs enable + proposal <1-65535> { + encryption aes256 + hash sha1 + } + proposal <1-65535> { + encryption 3des + hash md5 + } + } + ike-group { + key-exchange ikev1 + lifetime <30-86400> + proposal <1-65535> { + encryption aes256 + hash sha1 + } + proposal <1-65535> { + encryption aes128 + hash sha1 + } + } + ipsec-interfaces { + interface + } + profile { + authentication { + mode pre-shared-secret + pre-shared-secret + } + bind { + tunnel + } + esp-group + ike-group + } + } + } + +HUB Example Configuration: + +.. code-block:: sh + + set interfaces ethernet eth0 address '1.1.1.1/30' + set interfaces ethernet eth1 address '192.168.1.1/24' + set system host-name 'HUB' + + set interfaces tunnel tun0 address 10.0.0.1/24 + set interfaces tunnel tun0 encapsulation gre + set interfaces tunnel tun0 local-ip 1.1.1.1 + set interfaces tunnel tun0 multicast enable + set interfaces tunnel tun0 parameters ip key 1 + + set protocols nhrp tunnel tun0 cisco-authentication SECRET + set protocols nhrp tunnel tun0 holding-time 300 + set protocols nhrp tunnel tun0 multicast dynamic + set protocols nhrp tunnel tun0 redirect + + set vpn ipsec ipsec-interfaces interface eth0 + set vpn ipsec ike-group IKE-HUB proposal 1 + set vpn ipsec ike-group IKE-HUB proposal 1 encryption aes256 + set vpn ipsec ike-group IKE-HUB proposal 1 hash sha1 + set vpn ipsec ike-group IKE-HUB proposal 2 encryption aes128 + set vpn ipsec ike-group IKE-HUB proposal 2 hash sha1 + set vpn ipsec ike-group IKE-HUB lifetime 3600 + set vpn ipsec esp-group ESP-HUB proposal 1 encryption aes256 + set vpn ipsec esp-group ESP-HUB proposal 1 hash sha1 + set vpn ipsec esp-group ESP-HUB proposal 2 encryption 3des + set vpn ipsec esp-group ESP-HUB proposal 2 hash md5 + set vpn ipsec esp-group ESP-HUB lifetime 1800 + set vpn ipsec esp-group ESP-HUB pfs dh-group2 + + set vpn ipsec profile NHRPVPN + set vpn ipsec profile NHRPVPN authentication mode pre-shared-secret + set vpn ipsec profile NHRPVPN authentication pre-shared-secret SECRET + set vpn ipsec profile NHRPVPN bind tunnel tun0 + set vpn ipsec profile NHRPVPN esp-group ESP-HUB + set vpn ipsec profile NHRPVPN ike-group IKE-HUB + + set protocols static route 0.0.0.0/0 next-hop 1.1.1.2 + set protocols static route 192.168.2.0/24 next-hop 10.0.0.2 + set protocols static route 192.168.3.0/24 next-hop 10.0.0.3 + +SPOKE Configuration +^^^^^^^^^^^^^^^^^^^ + +SPOKE1 Configuration: + +.. code-block:: sh + + interfaces + tunnel { + address + encapsulation gre + local-ip + multicast enable + description + parameters { + ip { + + } + } + } + } + protocols { + nhrp { + tunnel { + cisco-authentication + map { + nbma-address + register + } + holding-time + multicast nhs + redirect + shortcut + } + } + } + vpn { + ipsec { + esp-group { + lifetime <30-86400> + mode tunnel + pfs enable + proposal <1-65535> { + encryption aes256 + hash sha1 + } + proposal <1-65535> { + encryption 3des + hash md5 + } + } + ike-group { + key-exchange ikev1 + lifetime <30-86400> + proposal <1-65535> { + encryption aes256 + hash sha1 + } + proposal <1-65535> { + encryption aes128 + hash sha1 + } + } + ipsec-interfaces { + interface + } + profile { + authentication { + mode pre-shared-secret + pre-shared-secret + } + bind { + tunnel + } + esp-group + ike-group + } + } + } + +SPOKE1 Example Configuration + +.. code-block:: sh + + set interfaces ethernet eth0 address 'dhcp' + set interfaces ethernet eth1 address '192.168.2.1/24' + set system host-name 'SPOKE1' + + set interfaces tunnel tun0 address 10.0.0.2/24 + set interfaces tunnel tun0 encapsulation gre + set interfaces tunnel tun0 local-ip 0.0.0.0 + set interfaces tunnel tun0 multicast enable + set interfaces tunnel tun0 parameters ip key 1 + + set protocols nhrp tunnel tun0 cisco-authentication 'SECRET' + set protocols nhrp tunnel tun0 map 10.0.0.1/24 nbma-address 1.1.1.1 + set protocols nhrp tunnel tun0 map 10.0.0.1/24 'register' + set protocols nhrp tunnel tun0 multicast 'nhs' + set protocols nhrp tunnel tun0 'redirect' + set protocols nhrp tunnel tun0 'shortcut' + + set vpn ipsec ipsec-interfaces interface eth0 + set vpn ipsec ike-group IKE-SPOKE proposal 1 + set vpn ipsec ike-group IKE-SPOKE proposal 1 encryption aes256 + set vpn ipsec ike-group IKE-SPOKE proposal 1 hash sha1 + set vpn ipsec ike-group IKE-SPOKE proposal 2 encryption aes128 + set vpn ipsec ike-group IKE-SPOKE proposal 2 hash sha1 + set vpn ipsec ike-group IKE-SPOKE lifetime 3600 + set vpn ipsec esp-group ESP-SPOKE proposal 1 encryption aes256 + set vpn ipsec esp-group ESP-SPOKE proposal 1 hash sha1 + set vpn ipsec esp-group ESP-SPOKE proposal 2 encryption 3des + set vpn ipsec esp-group ESP-SPOKE proposal 2 hash md5 + set vpn ipsec esp-group ESP-SPOKE lifetime 1800 + set vpn ipsec esp-group ESP-SPOKE pfs dh-group2 + + set vpn ipsec profile NHRPVPN + set vpn ipsec profile NHRPVPN authentication mode pre-shared-secret + set vpn ipsec profile NHRPVPN authentication pre-shared-secret SECRET + set vpn ipsec profile NHRPVPN bind tunnel tun0 + set vpn ipsec profile NHRPVPN esp-group ESP-SPOKE + set vpn ipsec profile NHRPVPN ike-group IKE-SPOKE + + set protocols static route 192.168.1.0/24 next-hop 10.0.0.1 + set protocols static route 192.168.3.0/24 next-hop 10.0.0.3 + + +SPOKE2 Configuration + +.. code-block:: sh + + interfaces + tunnel { + address + encapsulation gre + local-ip + multicast enable + description + parameters { + ip { + + } + } + } + } + protocols { + nhrp { + tunnel { + cisco-authentication + map { + nbma-address + register + } + holding-time + multicast nhs + redirect + shortcut + } + } + } + vpn { + ipsec { + esp-group { + lifetime <30-86400> + mode tunnel + pfs enable + proposal <1-65535> { + encryption aes256 + hash sha1 + } + proposal <1-65535> { + encryption 3des + hash md5 + } + } + ike-group { + key-exchange ikev1 + lifetime <30-86400> + proposal <1-65535> { + encryption aes256 + hash sha1 + } + proposal <1-65535> { + encryption aes128 + hash sha1 + } + } + ipsec-interfaces { + interface + } + profile { + authentication { + mode pre-shared-secret + pre-shared-secret + } + bind { + tunnel + } + esp-group + ike-group + } + } + } + +SPOKE2 Example Configuration + +.. code-block:: sh + + set interfaces ethernet eth0 address 'dhcp' + set interfaces ethernet eth1 address '192.168.3.1/24' + set system host-name 'SPOKE2' + + set interfaces tunnel tun0 address 10.0.0.3/24 + set interfaces tunnel tun0 encapsulation gre + set interfaces tunnel tun0 local-ip 0.0.0.0 + set interfaces tunnel tun0 multicast enable + set interfaces tunnel tun0 parameters ip key 1 + + set protocols nhrp tunnel tun0 cisco-authentication SECRET + set protocols nhrp tunnel tun0 map 10.0.0.1/24 nbma-address 1.1.1.1 + set protocols nhrp tunnel tun0 map 10.0.0.1/24 register + set protocols nhrp tunnel tun0 multicast nhs + set protocols nhrp tunnel tun0 redirect + set protocols nhrp tunnel tun0 shortcut + + set vpn ipsec ipsec-interfaces interface eth0 + set vpn ipsec ike-group IKE-SPOKE proposal 1 + set vpn ipsec ike-group IKE-SPOKE proposal 1 encryption aes256 + set vpn ipsec ike-group IKE-SPOKE proposal 1 hash sha1 + set vpn ipsec ike-group IKE-SPOKE proposal 2 encryption aes128 + set vpn ipsec ike-group IKE-SPOKE proposal 2 hash sha1 + set vpn ipsec ike-group IKE-SPOKE lifetime 3600 + set vpn ipsec esp-group ESP-SPOKE proposal 1 encryption aes256 + set vpn ipsec esp-group ESP-SPOKE proposal 1 hash sha1 + set vpn ipsec esp-group ESP-SPOKE proposal 2 encryption 3des + set vpn ipsec esp-group ESP-SPOKE proposal 2 hash md5 + set vpn ipsec esp-group ESP-SPOKE lifetime 1800 + set vpn ipsec esp-group ESP-SPOKE pfs dh-group2 + + set vpn ipsec profile NHRPVPN + set vpn ipsec profile NHRPVPN authentication mode pre-shared-secret + set vpn ipsec profile NHRPVPN authentication pre-shared-secret SECRET + set vpn ipsec profile NHRPVPN bind tunnel tun0 + set vpn ipsec profile NHRPVPN esp-group ESP-SPOKE + set vpn ipsec profile NHRPVPN ike-group IKE-SPOKE + + set protocols static route 192.168.1.0/24 next-hop 10.0.0.1 + set protocols static route 192.168.2.0/24 next-hop 10.0.0.2 + +.. _RFC2332: https://tools.ietf.org/html/rfc2332 +.. _RFC1702: https://tools.ietf.org/html/rfc1702 +.. _RFC4301: https://tools.ietf.org/html/rfc4301 -- cgit v1.2.3