From 0ae01b4a1c6e6376b2db498618c65801a809e826 Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Fri, 5 Feb 2021 22:53:53 +0100 Subject: vrf: static: T2450: adjust to new CLI syntax --- docs/configexamples/tunnelbroker-ipv6.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/configexamples/tunnelbroker-ipv6.rst') diff --git a/docs/configexamples/tunnelbroker-ipv6.rst b/docs/configexamples/tunnelbroker-ipv6.rst index b6f1cc07..1df814dc 100644 --- a/docs/configexamples/tunnelbroker-ipv6.rst +++ b/docs/configexamples/tunnelbroker-ipv6.rst @@ -35,7 +35,7 @@ tunnel information page. set interfaces tunnel tun0 mtu '1472' set interfaces tunnel tun0 multicast 'disable' set interfaces tunnel tun0 remote-ip Server_IPv4_from_Tunnelbroker # This is the IP of the Tunnelbroker server - set protocols static interface-route6 ::/0 next-hop-interface tun0 # Tell all traffic to go over this tunnel + set protocols static route6 ::/0 interface tun0 # Tell all traffic to go over this tunnel commit If your WAN connection is over PPPoE, you may need to set the MTU on the above -- cgit v1.2.3