From 0e98fdb64154011850ba5705b9c6f8e74868c955 Mon Sep 17 00:00:00 2001 From: srividya0208 Date: Mon, 6 May 2024 13:49:48 -0400 Subject: Modified old option from 'enable-default-log' to new one 'default-log' --- docs/configuration/firewall/ipv6.rst | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'docs/configuration/firewall/ipv6.rst') diff --git a/docs/configuration/firewall/ipv6.rst b/docs/configuration/firewall/ipv6.rst index 0aa8a137..c679ffd5 100644 --- a/docs/configuration/firewall/ipv6.rst +++ b/docs/configuration/firewall/ipv6.rst @@ -206,10 +206,10 @@ log options can be defined. Enable logging for the matched packet. If this configuration command is not present, then log is not enabled. -.. cfgcmd:: set firewall ipv6 forward filter enable-default-log -.. cfgcmd:: set firewall ipv6 input filter enable-default-log -.. cfgcmd:: set firewall ipv6 output filter enable-default-log -.. cfgcmd:: set firewall ipv6 name enable-default-log +.. cfgcmd:: set firewall ipv6 forward filter default-log +.. cfgcmd:: set firewall ipv6 input filter default-log +.. cfgcmd:: set firewall ipv6 output filter default-log +.. cfgcmd:: set firewall ipv6 name default-log Use this command to enable the logging of the default action on the specified chain. @@ -1177,7 +1177,7 @@ Example Partial Config } name INP-ETH1 { default-action drop - enable-default-log + default-log rule 10 { action accept protocol tcp_udp -- cgit v1.2.3