From 313645bf9ac24c8b5f2168f4b7ff26d64cc980ca Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Mon, 4 Jul 2022 19:38:21 +0200 Subject: wifi: add infos about Intel AX200 card (cherry picked from commit 38f0adb3242f23ec53aa48f424bd7d8f04f9acfa) --- docs/configuration/interfaces/wireless.rst | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'docs/configuration/interfaces/wireless.rst') diff --git a/docs/configuration/interfaces/wireless.rst b/docs/configuration/interfaces/wireless.rst index b775011f..231652a0 100644 --- a/docs/configuration/interfaces/wireless.rst +++ b/docs/configuration/interfaces/wireless.rst @@ -590,3 +590,24 @@ To get it to work as an access point with this configuration you will need to set up a DHCP server to work with that network. You can - of course - also bridge the Wireless interface with any configured bridge (:ref:`bridge-interface`) on the system. + +.. _wireless-interface-intel-ax200: + +Intel AX200 +=========== + +The Intel AX200 card does not work out of the box in AP mode, see +https://unix.stackexchange.com/questions/598275/intel-ax200-ap-mode. You can +still put this card into AP mode using the following configuration: + +.. stop_vyoslinter +.. code-block:: none + + set interfaces wireless wlan0 channel '1' + set interfaces wireless wlan0 country-code 'us' + set interfaces wireless wlan0 mode 'n' + set interfaces wireless wlan0 physical-device 'phy0' + set interfaces wireless wlan0 ssid 'VyOS' + set interfaces wireless wlan0 type 'access-point' + +.. start_vyoslinter -- cgit v1.2.3