From 95f1bc6724027e8b8cac7f507a2a5b3f10e26ede Mon Sep 17 00:00:00 2001 From: rebortg Date: Fri, 11 Dec 2020 22:43:35 +0100 Subject: policy: fix lint errors --- docs/configuration/policy/index.rst | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'docs/configuration/policy/index.rst') diff --git a/docs/configuration/policy/index.rst b/docs/configuration/policy/index.rst index 4b7d48ee..c772306f 100644 --- a/docs/configuration/policy/index.rst +++ b/docs/configuration/policy/index.rst @@ -10,8 +10,10 @@ routes and their attributes needs to be put into the routing table. There could be a wide range of routing policies. Some examples are below: * Set some metric to routes learned from a particular neighbor -* Set some attributes (like AS PATH or Community value) to advertised routes to neighbors -* Prefer a specific routing protocol routes over another routing protocol running on the same router +* Set some attributes (like AS PATH or Community value) to advertised routes + to neighbors +* Prefer a specific routing protocol routes over another routing protocol + running on the same router Example ======= @@ -65,8 +67,6 @@ neighbor. You now see the longer AS path. -.. include:: /_include/need_improvement.txt - .. _routing-pbr: ### @@ -136,7 +136,7 @@ Add default routes for routing ``table 10`` and ``table 11`` .. code-block:: none - set protocols static table 10 route 0.0.0.0/0 next-hop 192.0.1.1 + set protocols static table 10 route 0.0.0.0/0 next-hop 192.0.2.1 set protocols static table 11 route 0.0.0.0/0 next-hop 192.0.2.2 Add policy route matching VLAN source addresses @@ -175,11 +175,13 @@ each other using the main routing table. Local route =========== -The following example allows VyOS to use :abbr:`PBR (Policy-Based Routing)` for traffic, which originated from the router itself. -That solution for multiple ISP's and VyOS router will respond from the same interface that the packet was received. -Also, it used, if we want that one VPN tunnel to be through one provider, and the second through another. +The following example allows VyOS to use :abbr:`PBR (Policy-Based Routing)` +for traffic, which originated from the router itself. That solution for multiple +ISP's and VyOS router will respond from the same interface that the packet was +received. Also, it used, if we want that one VPN tunnel to be through one +provider, and the second through another. -* ``192.168.1.254`` IP addreess on VyOS eth1 from ISP1 +* ``203.0.113.0.254`` IP addreess on VyOS eth1 from ISP1 * ``192.168.2.254`` IP addreess on VyOS eth2 from ISP2 * ``table 10`` Routing table used for ISP1 * ``table 11`` Routing table used for ISP2 @@ -188,10 +190,10 @@ Also, it used, if we want that one VPN tunnel to be through one provider, and th .. code-block:: none set policy local-route rule 101 set table '10' - set policy local-route rule 101 source '192.0.1.254' + set policy local-route rule 101 source '203.0.113.0.254' set policy local-route rule 102 set table '11' set policy local-route rule 102 source '192.0.2.254' - set protocols static table 10 route '0.0.0.0/0' next-hop '192.0.1.1' + set protocols static table 10 route '0.0.0.0/0' next-hop '203.0.113.0.1' set protocols static table 11 route '0.0.0.0/0' next-hop '192.0.2.2' Add multiple source IP in one rule with same priority @@ -199,7 +201,7 @@ Add multiple source IP in one rule with same priority .. code-block:: none set policy local-route rule 101 set table '10' - set policy local-route rule 101 source '192.0.1.254' - set policy local-route rule 101 source '192.0.1.253' - set policy local-route rule 101 source '203.0.113.0/24' + set policy local-route rule 101 source '203.0.113.0.254' + set policy local-route rule 101 source '203.0.113.0.253' + set policy local-route rule 101 source '198.51.100.0/24' -- cgit v1.2.3