From 5b1e916046c2617b3ddff5d2936ca97927fbe232 Mon Sep 17 00:00:00 2001 From: rebortg Date: Mon, 4 Oct 2021 21:03:28 +0200 Subject: rip: correct spelling and grammar --- docs/configuration/protocols/rip.rst | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'docs/configuration/protocols') diff --git a/docs/configuration/protocols/rip.rst b/docs/configuration/protocols/rip.rst index 4d46e2f0..db6b3b31 100644 --- a/docs/configuration/protocols/rip.rst +++ b/docs/configuration/protocols/rip.rst @@ -1,3 +1,4 @@ +:lastproofread: 2021-10-04 .. _rip: ### @@ -57,20 +58,20 @@ Optional Configuration .. cfgcmd:: set protocols rip default-distance - This command change distance value of RIP. The distance range is 1 to 255. + This command change the distance value of RIP. The distance range is 1 to 255. .. note:: Routes with a distance of 255 are effectively disabled and not installed into the kernel. .. cfgcmd:: set protocols rip network-distance distance - This command sets default RIP distance to specified value when the route’s + This command sets default RIP distance to a specified value when the routes source IP address matches the specified prefix. .. cfgcmd:: set protocols rip network-distance access-list This command can be used with previous command to sets default RIP distance - to specified value when the route’s source IP address matches the specified + to specified value when the route source IP address matches the specified prefix and the specified access-list. .. cfgcmd:: set protocols rip default-information originate @@ -156,7 +157,7 @@ Redistribution Configuration This command modifies the default metric (hop count) value for redistributed routes. The metric range is 1 to 16. The default value is 1. This command does not affect connected route even if it is redistributed by - :cfgcmd:`redistribute connected`. To modify connected route’s metric + :cfgcmd:`redistribute connected`. To modify connected routes metric value, please use :cfgcmd:`redistribute connected metric`. @@ -178,7 +179,7 @@ Interfaces Configuration This command disables split-horizon on the interface. By default, VyOS does not advertise RIP routes out the interface over which they were learned - (split horizon). + (split horizon).3 .. cfgcmd:: set interfaces ip rip split-horizon poison-reverse -- cgit v1.2.3