From c857be8ce1474b56711db76170ab7494771c2202 Mon Sep 17 00:00:00 2001
From: Christian Breunig <christian@breunig.cc>
Date: Sat, 10 Feb 2024 10:01:44 +0100
Subject: srv6: T5849: add segment support to "protocols static route6"

---
 docs/configuration/protocols/static.rst | 35 ++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

(limited to 'docs/configuration/protocols')

diff --git a/docs/configuration/protocols/static.rst b/docs/configuration/protocols/static.rst
index 1ad252e7..bfc25201 100644
--- a/docs/configuration/protocols/static.rst
+++ b/docs/configuration/protocols/static.rst
@@ -59,6 +59,29 @@ Static Routes
    .. note:: Routes with a distance of 255 are effectively disabled and not
       installed into the kernel.
 
+.. cfgcmd:: set protocols static route6 <subnet> next-hop <address> segments <segments>
+
+   It is possible to specify a static route for ipv6 prefixes using an SRv6 segments
+   instruction. The `/` separator can be used to specify multiple segment instructions.
+
+   Example:
+
+   .. code-block:: none
+
+     set protocols static route6 2001:db8:1000::/36 next-hop 2001:db8:201::ffff segments '2001:db8:aaaa::7/2002::4/2002::3/2002::2'
+
+   .. code-block:: none
+
+     vyos@vyos:~$ show ipv6 route
+     Codes: K - kernel route, C - connected, S - static, R - RIPng,
+           O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table,
+           v - VNC, V - VNC-Direct, A - Babel, F - PBR,
+           f - OpenFabric,
+           > - selected route, * - FIB route, q - queued, r - rejected, b - backup
+           t - trapped, o - offload failure
+     C>* 2001:db8:201::/64 is directly connected, eth0.201, 00:00:46
+     S>* 2001:db8:1000::/36 [1/0] via 2001:db8:201::ffff, eth0.201, seg6 2001:db8:aaaa::7,2002::4,2002::3,2002::2, weight 1, 00:00:08
+
 
 Interface Routes
 ================
@@ -103,6 +126,17 @@ Interface Routes
 
    Range is 1 to 255, default is 1.
 
+.. cfgcmd:: set protocols static route6 <subnet> interface
+   <interface> segments <segments>
+
+   It is possible to specify a static route for ipv6 prefixes using an SRv6 segments
+   instruction. The `/` separator can be used to specify multiple segment instructions.
+
+   Example:
+
+   .. code-block:: none
+
+     set protocols static route6 2001:db8:1000::/36 interface eth0 segments '2001:db8:aaaa::7/2002::4/2002::3/2002::2'
 
 Blackhole
 =========
@@ -133,7 +167,6 @@ Blackhole
    Defines blackhole distance for this route, routes with smaller administrative
    distance are elected prior to those with a higher distance.
 
-
 Alternate Routing Tables
 ========================
 
-- 
cgit v1.2.3