From 4f88fbdbce6543bbd3a72e7ac781d849fb6e50a9 Mon Sep 17 00:00:00 2001 From: rebortg Date: Fri, 27 Jan 2023 13:48:34 +0100 Subject: console-server: sync branches --- docs/configuration/service/console-server.rst | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'docs/configuration/service/console-server.rst') diff --git a/docs/configuration/service/console-server.rst b/docs/configuration/service/console-server.rst index 435c972c..c9ea7f77 100644 --- a/docs/configuration/service/console-server.rst +++ b/docs/configuration/service/console-server.rst @@ -26,30 +26,30 @@ times are used to send a single character, and so dividing the signalling bit-rate by ten results in the overall transmission speed in characters per second. This is also the default setting if none of those options are defined. -.. cfgcmd:: set service console-server data-bits [7 | 8] +.. cfgcmd:: set service console-server device data-bits [7 | 8] Configure either seven or eight data bits. This defaults to eight data bits if left unconfigured. -.. cfgcmd:: set service console-server description +.. cfgcmd:: set service console-server device description A user friendly description identifying the connected peripheral. -.. cfgcmd:: set service console-server alias +.. cfgcmd:: set service console-server device alias A user friendly alias for this connection. Can be used instead of the device name when connecting. -.. cfgcmd:: set service console-server parity [even | odd | none] +.. cfgcmd:: set service console-server device parity [even | odd | none] Set the parity option for the console. If unset this will default to none. -.. cfgcmd:: set service console-server stop-bits [1 | 2] +.. cfgcmd:: set service console-server device stop-bits [1 | 2] Configure either one or two stop bits. This defaults to one stop bits if left unconfigured. -.. cfgcmd:: set service console-server speed +.. cfgcmd:: set service console-server device speed [ 300 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200 ] .. note:: USB to serial converters will handle most of their work in software @@ -63,7 +63,7 @@ Each individual configured console-server device can be directly exposed to the outside world. A user can directly connect via SSH to the configured port. -.. cfgcmd:: set service console-server ssh port +.. cfgcmd:: set service console-server device ssh port Accept SSH connections for the given `` on TCP port ``. After successfull authentication the user will be directly dropped to @@ -114,3 +114,7 @@ Operation .. hint:: If ``alias`` is set, it can be used instead of the device when connecting. + +.. opcmd:: show log console-server + + Show the console server log. \ No newline at end of file -- cgit v1.2.3