From 7f9b031aeffeeb48201c7d51df71fc58191b4138 Mon Sep 17 00:00:00 2001 From: aapostoliuk Date: Wed, 28 Feb 2024 15:59:51 +0200 Subject: Fixing IPoE and PPPoE documentation Fixing IPoE and PPPoE documentation --- docs/configuration/service/pppoe-server.rst | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'docs/configuration/service/pppoe-server.rst') diff --git a/docs/configuration/service/pppoe-server.rst b/docs/configuration/service/pppoe-server.rst index 04113666..99b3fbb5 100644 --- a/docs/configuration/service/pppoe-server.rst +++ b/docs/configuration/service/pppoe-server.rst @@ -352,16 +352,16 @@ IPv6 .. cfgcmd:: set service pppoe-server client-ipv6-pool prefix
mask - Use this comand to set the IPv6 address pool from which an l2tp client + Use this comand to set the IPv6 address pool from which an PPPoE client will get an IPv6 prefix of your defined length (mask) to terminate the - l2tp endpoint at their side. The mask length can be set from 48 to 128 + PPPoE endpoint at their side. The mask length can be set from 48 to 128 bit long, the default value is 64. .. cfgcmd:: set service pppoe-server client-ipv6-pool delegate
delegation-prefix Use this command to configure DHCPv6 Prefix Delegation (RFC3633) on - l2tp. You will have to set your IPv6 pool and the length of the + PPPoE. You will have to set your IPv6 pool and the length of the delegation prefix. From the defined IPv6 pool you will be handing out networks of the defined length (delegation-prefix). The length of the delegation prefix can be set from 32 to 64 bit long. @@ -624,7 +624,7 @@ address from the pool 10.1.1.100-111, terminates at the local endpoint Dual-Stack IPv4/IPv6 provisioning with Prefix Delegation ======================================================== -The example below covers a dual-stack configuration via pppoe-server. +The example below covers a dual-stack configuration. .. code-block:: none @@ -642,7 +642,7 @@ The example below covers a dual-stack configuration via pppoe-server. set service pppoe-server gateway-address '10.100.100.1' The client, once successfully authenticated, will receive an IPv4 and an -IPv6 /64 address to terminate the pppoe endpoint on the client side and +IPv6 /64 address to terminate the PPPoE endpoint on the client side and a /56 subnet for the clients internal use. .. code-block:: none -- cgit v1.2.3