From 02e462900ff6b57102229fe7eaaeaca1dc045246 Mon Sep 17 00:00:00 2001 From: aslanvyos <126803786+aslanvyos@users.noreply.github.com> Date: Wed, 18 Oct 2023 12:14:46 +0400 Subject: Update site2site_ipsec.rst To make easily understandable the Site-to-Site VPN ikev2 configuration for users (specially if the user is new in VyOS) made the following changes: - Added dummy interface to both routers for testing purposes - Added static route for both routers for dummy interface --- docs/configuration/vpn/site2site_ipsec.rst | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'docs/configuration') diff --git a/docs/configuration/vpn/site2site_ipsec.rst b/docs/configuration/vpn/site2site_ipsec.rst index 879f8dfa..0be12955 100644 --- a/docs/configuration/vpn/site2site_ipsec.rst +++ b/docs/configuration/vpn/site2site_ipsec.rst @@ -272,15 +272,28 @@ Imagine the following topology IPSec IKEv2 site2site VPN (source ./draw.io/vpn_s2s_ikev2.drawio) +**LEFT:** +* WAN interface on `eth0.201` +* `eth0.201` interface IP: `172.18.201.10/24` +* `vti10` interface IP: `10.0.0.2/31` +* `dum0` interface IP: `10.0.11.1/24` (for testing purposes we create the `dummy` interface) + +**RIGHT:** +* WAN interface on `eth0.202` +* `eth0.201` interface IP: `172.18.202.10/24` +* `vti10` interface IP: `10.0.0.3/31` +* `dum0` interface IP: `10.0.12.1/24` (for testing purposes we create the `dummy` interface) .. note:: Don't get confused about the used /31 tunnel subnet. :rfc:`3021` gives you additional information for using /31 subnets on point-to-point links. -**left** +**LEFT** .. code-block:: none + set interfaces ethernet eth0 vif 201 address '172.18.201.10/24' + set interfaces dummy dum0 address '10.0.11.1/24' set interfaces vti vti10 address '10.0.0.2/31' set vpn ipsec esp-group ESP_DEFAULT compression 'disable' @@ -311,10 +324,14 @@ Imagine the following topology set vpn ipsec site-to-site peer 172.18.202.10 vti bind 'vti10' set vpn ipsec site-to-site peer 172.18.202.10 vti esp-group 'ESP_DEFAULT' -**right** + set protocols static interface-route 10.0.12.0/24 next-hop-interface vti10 + +**RIGHT** .. code-block:: none + set interfaces ethernet eth0 vif 202 address '172.18.202.10/24' + set interfaces dummy dum0 address '10.0.12.1/24' set interfaces vti vti10 address '10.0.0.3/31' set vpn ipsec esp-group ESP_DEFAULT compression 'disable' @@ -345,6 +362,8 @@ Imagine the following topology set vpn ipsec site-to-site peer 172.18.201.10 vti bind 'vti10' set vpn ipsec site-to-site peer 172.18.201.10 vti esp-group 'ESP_DEFAULT' + set protocols static interface-route 10.0.11.0/24 next-hop-interface vti10 + Key Parameters: * ``authentication local-id/remote-id`` - IKE identification is used for -- cgit v1.2.3