From 638e43825c890e95ec30b0359377f0ec68edd19a Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Wed, 17 Nov 2021 18:48:46 +0100 Subject: bond: add note about eve-ng NIC driver (cherry picked from commit fd4e5422b11ad9d908b4c0fcbfa4e76993cb2eb6) --- docs/configuration/interfaces/bonding.rst | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'docs/configuration') diff --git a/docs/configuration/interfaces/bonding.rst b/docs/configuration/interfaces/bonding.rst index 13203d15..e0f2c576 100644 --- a/docs/configuration/interfaces/bonding.rst +++ b/docs/configuration/interfaces/bonding.rst @@ -315,6 +315,16 @@ a per VIF IPv4 address. set interfaces bonding bond0 member interface eth1 set interfaces bonding bond0 member interface eth2 + +.. note:: If you happen to run this in a virtual environment like by EVE-NG + you need to ensure your VyOS NIC is set to use the e1000 driver. Using the + default ``virtio-net-pci`` or the ``vmxnet3`` driver will not work. ICMP + messages will not be properly processed. They are visible on the virtual wire + but will not make it fully up the networking stack. + + You can check your NIC driver by issuing :opcmd:`show interfaces ethernet + eth0 physical | grep -i driver` + Cisco Catalyst ============== -- cgit v1.2.3