From 3c4d9ec2e93740eb9bd398736b228af356d2b2a8 Mon Sep 17 00:00:00 2001 From: Nicolas Fort Date: Wed, 27 Dec 2023 07:45:07 -0300 Subject: System Conntrack: update commands for timeout rules; update commands for ignore rules, since both ipv4 and ipv6 rules are supported. --- docs/configuration/system/conntrack.rst | 149 ++++++++++++++++++++------------ 1 file changed, 93 insertions(+), 56 deletions(-) (limited to 'docs/configuration') diff --git a/docs/configuration/system/conntrack.rst b/docs/configuration/system/conntrack.rst index 68a4f2b8..6ed5fef7 100644 --- a/docs/configuration/system/conntrack.rst +++ b/docs/configuration/system/conntrack.rst @@ -46,9 +46,23 @@ Configure | Use `delete system conntrack modules` to deactive all modules. | Or, for example ftp, `delete system conntrack modules ftp`. +.. cfgcmd:: set system conntrack tcp half-open-connections <1-21474836> + :defaultvalue: -Define Conection Timeouts -========================= + Set the maximum number of TCP half-open connections. + +.. cfgcmd:: set system conntrack tcp loose + :defaultvalue: + + Policy to track previously established connections. + +.. cfgcmd:: set system conntrack tcp max-retrans <1-2147483647> + :defaultvalue: + + Set the number of TCP maximum retransmit attempts. + +Contrack Timeouts +================= VyOS supports setting timeouts for connections according to the connection type. You can set timeout values for generic connections, for ICMP @@ -82,34 +96,48 @@ states. Set the timeout in secounds for a protocol or state. - You can also define custom timeout values to apply to a specific subset of connections, based on a packet and flow selector. To do this, you need to create a rule defining the packet and flow selector. -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> description +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + description Set a rule description. +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + destination address +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + source address -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> destination address -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> source address - - set a destination and/or source address. Accepted input: + Set a destination and/or source address. Accepted input for ipv4: .. code-block:: none - IP address to match - Subnet to match - - - IP range to match - ! Match everything except the specified address - ! Match everything except the specified subnet - !- - Match everything except the specified range - -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> destination port -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> source port + set system conntrack timeout custom ipv4 rule <1-999999> [source | destination] address + Possible completions: + IPv4 address to match + IPv4 prefix to match + - IPv4 address range to match + ! Match everything except the specified address + ! Match everything except the specified prefix + !- Match everything except the specified range + + set system conntrack timeout custom ipv6 rule <1-999999> [source | destination] address + Possible completions: + IP address to match + Subnet to match + - + IP range to match + ! Match everything except the specified address + ! Match everything except the specified prefix + !- + Match everything except the specified range + +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + destination port +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + source port Set a destination and/or source port. Accepted input: @@ -123,49 +151,58 @@ create a rule defining the packet and flow selector. The whole list can also be "negated" using '!'. For example: `!22,telnet,http,123,1001-1005`` - - -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol icmp <1-21474836> -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol other <1-21474836> -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp close <1-21474836> -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp close-wait <1-21474836> -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp established <1-21474836> -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp fin-wait <1-21474836> -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp last-ack <1-21474836> -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp syn-recv <1-21474836> -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp syn-sent <1-21474836> -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol tcp time-wait <1-21474836> -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol udp other <1-21474836> -.. cfgcmd:: set system conntrack timeout custom rule <1-9999> protocol udp stream <1-21474836> +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + protocol tcp close <1-21474836> +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + protocol tcp close-wait <1-21474836> +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + protocol tcp established <1-21474836> +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + protocol tcp fin-wait <1-21474836> +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + protocol tcp last-ack <1-21474836> +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + protocol tcp syn-recv <1-21474836> +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + protocol tcp syn-sent <1-21474836> +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + protocol tcp time-wait <1-21474836> +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + protocol udp replied <1-21474836> +.. cfgcmd:: set system conntrack timeout custom [ipv4 | ipv6] rule <1-999999> + protocol udp unreplied <1-21474836> Set the timeout in secounds for a protocol or state in a custom rule. - -.. cfgcmd:: set system conntrack tcp half-open-connections <1-21474836> - :defaultvalue: - - Set the maximum number of TCP half-open connections. - -.. cfgcmd:: set system conntrack tcp loose - :defaultvalue: - - Policy to track previously established connections. - -.. cfgcmd:: set system conntrack tcp max-retrans <1-2147483647> - :defaultvalue: - - Set the number of TCP maximum retransmit attempts. - -.. cfgcmd:: set system conntrack ignore rule <1-9999> description -.. cfgcmd:: set system conntrack ignore rule <1-9999> destination address -.. cfgcmd:: set system conntrack ignore rule <1-9999> destination port -.. cfgcmd:: set system conntrack ignore rule <1-9999> inbound-interface -.. cfgcmd:: set system conntrack ignore rule <1-9999> protocol -.. cfgcmd:: set system conntrack ignore rule <1-9999> source address -.. cfgcmd:: set system conntrack ignore rule <1-9999> source port +Conntrack ignore rules +====================== Customized ignore rules, based on a packet and flow selector. +.. cfgcmd:: set system conntrack ignore [ipv4 | ipv6] rule <1-999999> + description +.. cfgcmd:: set system conntrack ignore [ipv4 | ipv6] rule <1-999999> + destination address +.. cfgcmd:: set system conntrack ignore [ipv4 | ipv6] rule <1-999999> + destination port +.. cfgcmd:: set system conntrack ignore [ipv4 | ipv6] rule <1-999999> + inbound-interface +.. cfgcmd:: set system conntrack ignore [ipv4 | ipv6] rule <1-999999> + protocol +.. cfgcmd:: set system conntrack ignore [ipv4 | ipv6] rule <1-999999> + source address +.. cfgcmd:: set system conntrack ignore [ipv4 | ipv6] rule <1-999999> + source port +.. cfgcmd:: set system conntrack ignore [ipv4 | ipv6] rule <1-999999> + tcp flags [not] + + Allowed values fpr TCP flags: ``ack``, ``cwr``, ``ecn``, ``fin``, ``psh``, + ``rst``, ``syn`` and ``urg``. Multiple values are supported, and for + inverted selection use ``not``, as shown in the example. + +Conntrack log +============= + .. cfgcmd:: set system conntrack log icmp destroy .. cfgcmd:: set system conntrack log icmp new .. cfgcmd:: set system conntrack log icmp update -- cgit v1.2.3