From a531335929286c47f64690db438abc8748418b2c Mon Sep 17 00:00:00 2001
From: Sam Burney <sburney@sifnt.net.au>
Date: Sat, 30 Jan 2021 09:39:42 +0000
Subject: pppoe: T3273: Add usage of each default-route mode

---
 docs/configuration/interfaces/pppoe.rst | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

(limited to 'docs/configuration')

diff --git a/docs/configuration/interfaces/pppoe.rst b/docs/configuration/interfaces/pppoe.rst
index 9d10b91f..e6b1f3ef 100644
--- a/docs/configuration/interfaces/pppoe.rst
+++ b/docs/configuration/interfaces/pppoe.rst
@@ -113,7 +113,7 @@ PPPoE options
    timeout period, after which an idle PPPoE link will be disconnected. A
    non-zero idle timeout will never disconnect the link after it first came up.
 
-.. cfgcmd:: set interfaces pppoe <interface> default-route
+.. cfgcmd:: set interfaces pppoe <interface> default-route [auto | force | none]
 
    Use this command to specify whether to automatically add a default route
    pointing to the endpoint of the PPPoE when the link comes up. The default
@@ -122,6 +122,16 @@ PPPoE options
    **default:** A default route to the remote endpoint is automatically added
    when the link comes up (i.e. auto).
 
+   * auto: A default route is added if no other default route (From any
+     source) already exists.
+   * force: A default route is added after removing *all* existing default
+     routes.
+   * none: No default route is installed.
+
+.. note:: In all modes except 'none', all default routes using this interface will be
+   removed when the interface is torn down - even manually installed static
+   interface-routes.
+
 .. cfgcmd:: set interfaces pppoe <interface> idle-timeout <time>
 
    Use this command to set the idle timeout interval to be used with on-demand
@@ -240,7 +250,8 @@ Requirements:
 * With the ``default-route`` option set to ``auto``, VyOS will only add the
   default gateway you receive from your DSL ISP to the routing table if you
   have no other WAN connections. If you wish to use a dual WAN connection,
-  change the ``default-route`` option to ``force``.
+  change the ``default-route`` option to ``force``.  You could also install
+  a static interface-route and set the ``default-route`` option to ``none``.
 * With the ``name-server`` option set to ``none``, VyOS will ignore the
   nameservers your ISP sens you and thus you can fully rely on the ones you
   have configured statically.
-- 
cgit v1.2.3


From 4842a37b7a647eed76904c3fdd4ed706c47f014e Mon Sep 17 00:00:00 2001
From: Sam Burney <sburney@sifnt.net.au>
Date: Sat, 30 Jan 2021 09:53:53 +0000
Subject: pppoe: T3273: Fixed issue with line length

---
 docs/configuration/interfaces/pppoe.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'docs/configuration')

diff --git a/docs/configuration/interfaces/pppoe.rst b/docs/configuration/interfaces/pppoe.rst
index e6b1f3ef..0fdbba42 100644
--- a/docs/configuration/interfaces/pppoe.rst
+++ b/docs/configuration/interfaces/pppoe.rst
@@ -128,9 +128,9 @@ PPPoE options
      routes.
    * none: No default route is installed.
 
-.. note:: In all modes except 'none', all default routes using this interface will be
-   removed when the interface is torn down - even manually installed static
-   interface-routes.
+.. note:: In all modes except 'none', all default routes using this interface
+   will be removed when the interface is torn down - even manually installed
+   static interface-routes.
 
 .. cfgcmd:: set interfaces pppoe <interface> idle-timeout <time>
 
-- 
cgit v1.2.3