From 8587946d16aaae6f5495c1e591220f88005cd276 Mon Sep 17 00:00:00 2001 From: Christian Poessinger Date: Mon, 3 Aug 2020 15:04:14 +0200 Subject: build-vyos: ease build instructions --- docs/contributing/build-vyos.rst | 597 ++++++++++++++------------------------- 1 file changed, 219 insertions(+), 378 deletions(-) (limited to 'docs/contributing/build-vyos.rst') diff --git a/docs/contributing/build-vyos.rst b/docs/contributing/build-vyos.rst index e1800816..42be06a0 100644 --- a/docs/contributing/build-vyos.rst +++ b/docs/contributing/build-vyos.rst @@ -1,59 +1,63 @@ .. _build: -Building VyOS -============= +########## +Build VyOS +########## -There are different ways you can build VyOS. +************* +Prerequisites +************* -Building using a :ref:`Docker` container, although not the only way, is the -easiest way as all dependencies are managed for you. It also allows you to -build ARM images on a x86 host. +There are different ways you can build VyOS. -However, you can also set up your own build machine and :ref:`build from source`. +Building using a :ref:`build_docker` container, although not the only way, is the +easiest way as all dependencies are managed for you. However, you can also +set up your own build machine and run a :ref:`build_native`. -.. note:: Starting with VyOS 1.2 the release model of VyOS has changed. - VyOS is now **free as in speech, but not as in beer**. This means - that while VyOS is still an open source project, the release ISOs are no - longer free and can only be obtained via subscription, or by contributing to - the community. +.. note:: Starting with VyOS 1.2 the release model of VyOS has changed. VyOS + is now **free as in speech, but not as in beer**. This means that while + VyOS is still an open source project, the release ISOs are no longer free + and can only be obtained via subscription, or by contributing to the + community. - The source code remains public and an ISO can be built - using the process outlined here. + The source code remains public and an ISO can be built using the process + outlined in this chapter. This will guide you though the process of building a VyOS ISO using Docker_. This process has been tested on clean installs of Debian Jessie, Stretch, and Buster. -.. _build docker: +.. _build_docker: Docker ------- +====== Installing Docker_ and prerequisites: .. code-block:: none $ sudo apt-get update - $ sudo apt-get install -y apt-transport-https ca-certificates curl \ - gnupg2 software-properties-common + $ sudo apt-get install -y apt-transport-https ca-certificates curl gnupg2 software-properties-common $ curl -fsSL https://download.docker.com/linux/debian/gpg | sudo apt-key add - - $ sudo add-apt-repository "deb [arch=amd64] \ - https://download.docker.com/linux/debian $(lsb_release -cs) stable" + $ sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/debian $(lsb_release -cs) stable" $ sudo apt-get update $ sudo apt-get install -y docker-ce -To be able to use Docker_ without ``sudo``, the current non-root user can be added to the -``docker`` group by calling: ``sudo usermod -aG docker yourusername`` +To be able to use Docker_ without ``sudo``, the current non-root user must be +added to the ``docker`` group by calling: ``sudo usermod -aG docker +yourusername``. -.. note:: Doing so grants privileges equivalent to the ``root`` user! It is recommended to remove the non-root user from the ``docker`` group after building the VyOS ISO. See also https://docs.docker.com/install/linux/linux-postinstall/#manage-docker-as-a-non-root-user +.. hint:: Doing so grants privileges equivalent to the ``root`` user! It is + recommended to remove the non-root user from the ``docker`` group after + building the VyOS ISO. See also `Docker as non-root`_. .. note:: The build process needs to be built on a local file system, building on SMB or NFS shares will result in the container failing to build properly! VirtualBox Drive Share is also not an option as block device operations are not implemented and the drive is always mounted as "nodev" -Build Docker Container -^^^^^^^^^^^^^^^^^^^^^^ +Build Container +--------------- The container can built by hand or by fetching the pre-built one from DockerHub. Using the pre-built containers from the `VyOS DockerHub organisation`_ will @@ -65,6 +69,9 @@ vyos-build repository). downloaded from DockerHub if it is not found on your local machine when you build the ISO. +Dockerhub +^^^^^^^^^ + To manually download the container from DockerHub, run: .. code-block:: none @@ -72,134 +79,197 @@ To manually download the container from DockerHub, run: $ docker pull vyos/vyos-build:crux # For VyOS 1.2 $ docker pull vyos/vyos-build:current # For rolling release +Build from source +^^^^^^^^^^^^^^^^^ + The container can also be built directly from source: .. code-block:: none - $ git clone -b crux --single-branch https://github.com/vyos/vyos-build # For VyOS 1.2 - $ git clone -b current --single-branch https://github.com/vyos/vyos-build # For rolling release + # For VyOS 1.2 (crux) + $ git clone -b crux --single-branch https://github.com/vyos/vyos-build + # For VyOS 1.3 (equuleus, current) + $ git clone -b current --single-branch https://github.com/vyos/vyos-build + $ cd vyos-build $ docker build -t vyos/vyos-build:crux docker # For VyOS 1.2 $ docker build -t vyos/vyos-build docker # For rollign release -.. note:: Since VyOS has switched to Debian (10) Buster in its ``master`` branch, - the that the used is different from the one used for ``crux`` branch. Hence you - will need one separate container for each branch +.. note:: Since VyOS has switched to Debian (10) Buster in its ``current`` branch, + you will require individual container for `current` and `crux` builds. -.. _build_iso: +Tips and Tricks +^^^^^^^^^^^^^^^ -Build ISO -^^^^^^^^^ - -If you have not build your own Docker image, you need to clone the repository to your local machine: - -.. code-block:: none - - $ git clone -b crux --single-branch https://github.com/vyos/vyos-build # For VyOS 1.2 - $ git clone -b current --single-branch https://github.com/vyos/vyos-build # For rolling release - -Now a fresh build of the VyOS ISO can begin. Change directory to the ``vyos-build`` directory and run: +You can create yourself some handy Bash aliases to always launch the latest - +per release train (`current` or `crux`) - container. Add the following to your +``.bash_aliases`` file: .. code-block:: none - $ cd vyos-build - $ docker run --rm -it --privileged -v $(pwd)/vyos-build:/vyos -w /vyos vyos/vyos-build:crux bash # For VyOS 1.2 - $ docker run --rm -it --privileged -v $(pwd)/vyos-build:/vyos -w /vyos vyos/vyos-build bash # For rolling release - vyos_bld@d4220bb519a0:/vyos# ./configure --architecture amd64 \ - --build-by "your@email.tld" \ - --build-type release --version 1.2.5 - vyos_bld@d4220bb519a0:/vyos# sudo make iso + alias vybld='docker pull vyos/vyos-build:current && docker run --rm -it \ + -v "$(pwd)":/vyos \ + -v "$HOME/.gitconfig":/etc/gitconfig \ + -v "$HOME/.bash_aliases":/home/vyos_bld/.bash_aliases \ + -v "$HOME/.bashrc":/home/vyos_bld/.bashrc \ + -w /vyos --privileged --sysctl net.ipv6.conf.lo.disable_ipv6=0 \ + -e GOSU_UID=$(id -u) -e GOSU_GID=$(id -g) \ + vyos/vyos-build:current bash' -When the build is successful, the resulting iso can be found inside the ``build`` -directory as ``live-image-[architecture].hybrid.iso``. + alias vybld_crux='docker pull vyos/vyos-build:crux && docker run --rm -it \ + -v "$(pwd)":/vyos \ + -v "$HOME/.gitconfig":/etc/gitconfig \ + -v "$HOME/.bash_aliases":/home/vyos_bld/.bash_aliases \ + -v "$HOME/.bashrc":/home/vyos_bld/.bashrc \ + -w /vyos --privileged --sysctl net.ipv6.conf.lo.disable_ipv6=0 \ + -e GOSU_UID=$(id -u) -e GOSU_GID=$(id -g) \ + vyos/vyos-build:crux bash' -.. note:: Attempting to use the docker build image on MacOS or Windows will fail - as docker does not expose all the filesystem feature required to the container. - Building within a VirtualBox server on Mac or Windows is however possible. - -Good luck! +Now you are prepared with two new aliases ``vybld`` and ``vybld_crux`` to spwan +your development containers in your current working directory. -.. note: Make sure to choose the matching container for the version of VyOS - that is being built, ``vyos/vyos-build:crux`` for VyOS 1.2 (crux) and - ``vyos/vyos-build`` for rolling release. - -.. _build source: +.. _build_native: -From source ------------ +Native Build +============ -To build from source, you will need: +To build VyOS natively you require a properly configured build host with the +following Debian versions installed: -- Debian Buster for VyOS 1.2 -- Debian Stretch for the rolling releases +- Debian Jessie for VyOS 1.2 (crux) +- Debian Buster for VyOS 1.3 (equuleus, current) - aka the rolling release To start, clone the repository to your local machine: .. code-block:: none - $ git clone -b crux --single-branch https://github.com/vyos/vyos-build # For VyOS 1.2 - $ git clone -b current --single-branch https://github.com/vyos/vyos-build # For rolling release + # For VyOS 1.2 (crux) + $ git clone -b crux --single-branch https://github.com/vyos/vyos-build + + # For VyOS 1.3 (equuleus, current) + $ git clone -b current --single-branch https://github.com/vyos/vyos-build For the packages required, you can refer to the ``docker/Dockerfile`` file in the repository_. The ``./configure`` script will also warn you if any dependencies are missing. -Once you have the required dependencies, you may configure the build by -running ``./configure`` with your options. For details, refer to -:ref:`Customizing the build`. +Once you have the required dependencies installed, you may proceed with the +steps descirbed in :ref:`build_iso`. + + +.. _build_iso: + +********* +Build ISO +********* + +Now as you are aware of the prerequisites we can continue and build our own +ISO from source. For this we have to fetch the latest source code from GitHub. +Please note as this will differ for both `current` and `crux`. + +.. code-block:: none + + # For VyOS 1.2 (crux) + $ git clone -b crux --single-branch https://github.com/vyos/vyos-build + + # For VyOS 1.3 (equuleus, current) + $ git clone -b current --single-branch https://github.com/vyos/vyos-build + +Now a fresh build of the VyOS ISO can begin. Change directory to the ``vyos-build`` directory and run: + +.. code-block:: none + + $ cd vyos-build + # For VyOS 1.2 (crux) + $ docker run --rm -it --privileged -v $(pwd):/vyos -w /vyos vyos/vyos-build:crux bash -Once you have configured your build, build the ISO by running: + # For VyOS 1.3 (equuleus, current) + $ docker run --rm -it --privileged -v $(pwd):/vyos -w /vyos vyos/vyos-build bash + +Start the build: .. code-block:: none - $ sudo make iso + vyos_bld@d4220bb519a0:/vyos# ./configure --architecture amd64 --build-by "j.randomhacker@vyos.io" + vyos_bld@d4220bb519a0:/vyos# sudo make iso + +When the build is successful, the resulting iso can be found inside the ``build`` +directory as ``live-image-[architecture].hybrid.iso``. + +Good luck! + +.. hint:: Attempting to use the Docker build image on MacOS will fail as + Docker does not expose all the filesystem feature required to the container. + Building within a VirtualBox server on Mac however possible. + +.. hint:: Building VyOS on Windows WSL2 with Docker integrated into WSL2 will work + like a charm. No problems are known so far! + +.. _build source: -The successfully built ISO should now be in the ``build/`` directory as -``live-image-[architecture].hybrid.iso``. .. _customize: -Customizing the build ---------------------- +Customize +========= This ISO can be customized with the following list of configure options. The full and current list can be generated with ``./configure --help``: .. code-block:: none - -h, --help show this help message and exit - --architecture ARCHITECTURE - Image target architecture (amd64 or i586 or armhf) - --build-by BUILD_BY Builder identifier (e.g. jrandomhacker@example.net) - --custom-package CUSTOM_PACKAGES - Custom packages to install from repositories - --build-type BUILD_TYPE - Build type, release or development - --debian-security-mirror DEBIAN_SECURITY_MIRROR - Debian security updated mirror - --version VERSION Version number (release builds only) - --debian-mirror DEBIAN_MIRROR - Debian repository mirror for ISO build - --vyos-mirror VYOS_MIRROR - VyOS package mirror - --pbuilder-debian-mirror PBUILDER_DEBIAN_MIRROR - Debian repository mirror for pbuilder env bootstrap - --debug Enable debug output - --custom-apt-entry CUSTOM_APT_ENTRY - Custom APT entry - --custom-apt-key CUSTOM_APT_KEY - Custom APT key file - -Customized packages -^^^^^^^^^^^^^^^^^^^ + $ ./configure --help + usage: configure [-h] [--architecture ARCHITECTURE] [--build-by BUILD_BY] + [--debian-mirror DEBIAN_MIRROR] + [--debian-security-mirror DEBIAN_SECURITY_MIRROR] + [--pbuilder-debian-mirror PBUILDER_DEBIAN_MIRROR] + [--vyos-mirror VYOS_MIRROR] [--build-type BUILD_TYPE] + [--version VERSION] [--build-comment BUILD_COMMENT] [--debug] + [--custom-apt-entry CUSTOM_APT_ENTRY] + [--custom-apt-key CUSTOM_APT_KEY] + [--custom-package CUSTOM_PACKAGE] + + optional arguments: + -h, --help show this help message and exit + --architecture ARCHITECTURE + Image target architecture (amd64 or i386 or armhf) + --build-by BUILD_BY Builder identifier (e.g. jrandomhacker@example.net) + --debian-mirror DEBIAN_MIRROR + Debian repository mirror for ISO build + --debian-security-mirror DEBIAN_SECURITY_MIRROR + Debian security updates mirror + --pbuilder-debian-mirror PBUILDER_DEBIAN_MIRROR + Debian repository mirror for pbuilder env bootstrap + --vyos-mirror VYOS_MIRROR + VyOS package mirror + --build-type BUILD_TYPE + Build type, release or development + --version VERSION Version number (release builds only) + --build-comment BUILD_COMMENT + Optional build comment + --debug Enable debug output + --custom-apt-entry CUSTOM_APT_ENTRY + Custom APT entry + --custom-apt-key CUSTOM_APT_KEY + Custom APT key file + --custom-package CUSTOM_PACKAGE + Custom package to install from repositories + +.. _build_custom_packages: + +Packages +-------- If you are brave enough to build yourself an ISO image containing any modified package from our GitHub organisation - this is the place to be. -Building an ISO with a customized package is in no way different then building -a regular (customized or not) ISO image. Simply place your modified `*.deb` -package inside the `packages` folder within `vyos-build`. You may need to create -the folder in advance. +Any "modified" package may refer to an altered version of e.g. vyos-1x package +that you would like to test before filing a PullRequest on GitHub. + +Building an ISO with any customized package is in no way different then +building a regular (customized or not) ISO image. Simply place your modified +`*.deb` package inside the `packages` folder within `vyos-build`. The build +process will then pickup your custom package and integrate it into your ISO. Troubleshooting --------------- @@ -229,307 +299,78 @@ during ISO build. .. _build_packages: -Build packages --------------- - -VyOS requires a bunch of packages which are VyOS specific and thus can not be -found in any Debian Upstream mirrror. Those packages can be found at the -`VyOS GitHub project`_ and there is a nice helper script available to build and -list those individual packages. - -``scripts/build-packages`` provides an easy interface to automate the process -of building all VyOS related packages that are not part of the upstream Debian -version. Execute it in the root of the ``vyos-build`` directory to start -compilation. - -.. code-block:: none - - $ scripts/build-packages -h - usage: build-packages [-h] [-c | -k | -f] [-v] [-l] [-b BUILD [BUILD ...]] - [-p] [--blacklist BLACKLIST [BLACKLIST ...]] - - optional arguments: - -h, --help show this help message and exit - -c, --clean Re-clone required Git repositories - -k, --keep Keep modified Git repositories - -f, --fetch Fetch sources only, no build - -v, --verbose Increase logging verbosity for each occurance - -l, --list-packages List all packages to build - -b BUILD [BUILD ...], --build BUILD [BUILD ...] - Whitespace separated list of packages to build - -p, --parallel Build on all CPUs - --blacklist BLACKLIST [BLACKLIST ...] - Do not build/report packages when calling --list - -Git repositoriers are automatically fetched and build on demand. If you want to -work offline you can fetch all source code first with the ``-f`` option. - -The easiest way to compile is with the above mentioned Docker -container, it includes all dependencies for compiling supported packages. - -.. code-block:: none - - $ cd vyos-build - $ docker run --rm -it -v $(pwd):/vyos -w /vyos \ - --sysctl net.ipv6.conf.lo.disable_ipv6=0 \ - vyos-build scripts/build-packages - -.. note:: ``--sysctl net.ipv6.conf.lo.disable_ipv6=0`` is required to build the - ``vyos-strongswan`` package - -.. note:: Prior to executing this script you need to create or build the Docker - container and checkout all packages you want to compile. - -Alternatively, on your build server run: - -.. code-block:: none - - $ sudo sysctl -w net.ipv6.conf.lo.disable_ipv6=0 - $ cd vyos-build - $ chmod +x scripts/build-packages - $ ./scripts/build-packages +******** +Packages +******** -Building single package(s) -^^^^^^^^^^^^^^^^^^^^^^^^^^ +VyOS itself comes with a bunch of packages which are specific to our system and +thus can not be found in any Debian mirrror. Those packages can be found at the +`VyOS GitHub project`_ in their source format can can easily be compiled into +a custom Debian (*.deb) package. -To build a single package use the same script as above but specify packages with -``-b``. +The easiest way to compile your package is with the above mentioned +:ref:`build_docker` container, it includes all required dependencies for +all VyOS related packages. -If building using Docker: +Assume we want to build the vyos-1x package on our own and modify it to our +needs. We first need to clone the repository from GitHub. .. code-block:: none + $ git clone https://github.com/vyos/vyos-1x - $ cd vyos-build - $ docker run --rm -it -v $(pwd):/vyos -w /vyos \ - --sysctl net.ipv6.conf.lo.disable_ipv6=0 \ # Only needed for `vyos-strongswan` - vyos-build scripts/build-packages -b +Build +===== -.. note:: ``vyos-strongswan`` will only compile on a Linux system, running on - macOS or Windows might result in a unit test deadlock (it never exits). - -If building on build server: +Launch Docker container and build package .. code-block:: none + # For VyOS 1.3 (equuleus, current) + $ docker run --rm -it --privileged -v $(pwd):/vyos -w /vyos vyos/vyos-build bash - $ sudo sysctl -w net.ipv6.conf.lo.disable_ipv6=0 # Only needed for `vyos-strongswan` - $ cd vyos-build - $ chmod +x scripts/build-packages - $ ./scripts/build-packages -b + # Change to source directory + $ cd vyos-1x -Building single package(s) from your own repositories -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + # Build DEB + $ dpkg-buildpackage -uc -us -tc -b -You can also build packages that are not from the default git repositories, -for example from your own forks of the official VyOS repositories. - -First create a directory "packages" at the top level of the vyos-build -repository and clone your package into it (creating a subdirectory with the -package contents). Then checkout the correct branch or commit you want to build -before building the package. - -Example using ``git@github.com:myname/vyos-1x.git`` repository to build vyos-1x: +After a minute or two you will find the generated DEB packages next to the vyos-1x +source directory: .. code-block:: none - $ cd vyos-build - $ mkdir packages - $ cd packages - $ git clone git@github.com:myname/vyos-1x.git - $ cd .. + # ls -al ../vyos-1x*.deb + -rw-r--r-- 1 vyos_bld vyos_bld 567420 Aug 3 12:01 ../vyos-1x_1.3dev0-1847-gb6dcb0a8_all.deb + -rw-r--r-- 1 vyos_bld vyos_bld 3808 Aug 3 12:01 ../vyos-1x-vmware_1.3dev0-1847-gb6dcb0a8_amd64.deb -If building using Docker: +Install +======= -.. code-block:: none +To take your newly created package on a test drive you can simply SCP it to a +running VyOS instance and install the new *.deb package over the current +running one. - $ docker run --rm -it -v $(pwd):/vyos -w /vyos \ - --sysctl net.ipv6.conf.lo.disable_ipv6=0 \ # Only needed for `vyos-strongswan` - vyos-build scripts/build-packages -b vyos-1x - -If building on build server: +Just install using the following commands: .. code-block:: none - $ sudo sysctl -w net.ipv6.conf.lo.disable_ipv6=0 # Only needed for `vyos-strongswan` - $ ./scripts/build-packages -b vyos-1x + vyos@vyos:~$ dpkg --install /tmp/vyos-1x_1.3dev0-1847-gb6dcb0a8_all.deb + (Reading database ... 58209 files and directories currently installed.) + Preparing to unpack .../vyos-1x_1.3dev0-1847-gb6dcb0a8_all.deb ... + Unpacking vyos-1x (1.3dev0-1847-gb6dcb0a8) over (1.3dev0-1847-gb6dcb0a8) ... + Setting up vyos-1x (1.3dev0-1847-gb6dcb0a8) ... + Processing triggers for rsyslog (8.1901.0-1) ... -.. note:: You need to git pull manually after you commit to the remote and - before rebuilding, the local repository won't be updated automatically. +You can also place the generated *.deb into your ISO build environment to +include it in a custom iso, see :ref:`build_custom_packages` for more +information. .. warning:: Any packages in the packages directory will be added to the iso during build, replacing the upstream ones. Make sure you delete them (both the source directories and built deb packages) if you want to build an iso from purely upstream packages. - -.. _upstream_packages: - -Upstream packages ------------------ - -Many base system packages are pulled straight from Debian's main and contrib -repositories, but there are exceptions. - -This chapter lists those exceptions and gives you a brief overview what we -have done on those packages. If you only want to build yourself a fresh ISO -you can completely skip this chapter. It may become interesting once you have -a VyOS deep dive. - -vyos-netplug -^^^^^^^^^^^^ - -Due to issues in the upstream version that sometimes set interfaces down, a -modified version is used. - -The source is located at https://github.com/vyos/vyos-netplug - -In the future, we may switch to using systemd infrastructure instead. Building -it doesn't require a special procedure. - -keepalived -^^^^^^^^^^ - -Keepalived normally isn't updated to newer feature releases between Debian -versions, so we are building it from source. - -Debian does keep their package in git, but it's upstream tarball imported into -git without its original commit history. To be able to merge new tags in, we -keep a fork of the upstream repository with packaging files imported from -Debian at https://github.com/vyos/keepalived-upstream - -strongswan -^^^^^^^^^^ - -Our StrongSWAN build differs from the upstream: - -- strongswan-nm package build is disabled since we don't use NetworkManager -- Patches for DMVPN are merged in - -The source is at https://github.com/vyos/vyos-strongswan - -DMVPN patches are added by this commit: -https://github.com/vyos/vyos-strongswan/commit/1cf12b0f2f921bfc51affa3b81226 - -Our op mode scripts use the python-vici module, which is not included in -Debian's build, and isn't quite easy to integrate in that build. For this -reason we debianize that module by hand now, using this procedure: - -0. Install https://pypi.org/project/stdeb/ -1. `cd vyos-strongswan` -2. `./configure --enable-python-eggs` -3. `cd src/libcharon/plugins/vici/python` -4. `make` -5. `python3 setup.py --command-packages=stdeb.command bdist_deb` - -The package ends up in deb_dist dir. - -ppp -^^^ - -Properly renaming PPTP and L2TP interfaces to pptpX and l2tpX from generic and -non-informative pppX requires a patch that is neither in the upstream nor in -Debian. - -We keep a fork of Debian's repo at https://github.com/vyos/ppp-debian - -The patches for pre-up renaming are: - -* https://github.com/vyos/ppp-debian/commit/e728180026a051d2a96396276e7e4ae -* https://github.com/vyos/ppp-debian/commit/f29ba8d9ebb043335a096d70bcd07e9 - -Additionally, there's a patch for reopening the log file to better support -logging to files, even though it's less essential: -https://github.com/vyos/ppp-debian/commit/dd2ebd5cdcddb40230dc4cc43d374055f - -The patches were written by Stephen Hemminger back in the Vyatta times. - -mdns-repeater -^^^^^^^^^^^^^ - -This package doesn't exist in Debian. A debianized fork is kept at -https://github.com/vyos/mdns-repeater - -No special build procedure is required. - -udp-broadcast-relay -^^^^^^^^^^^^^^^^^^^ - -This package doesn't exist in Debian. A debianized fork is kept at -https://github.com/vyos/udp-broadcast-relay - -No special build procedure is required. - -Linux kernel -^^^^^^^^^^^^ - -In the past a fork of the Kernel source code was kept at the well-known -location of https://github.com/vyos/vyos-kernel - where it is kept for history. - -Nowadays the Kernel we use is the upstream source code which is patched -with two additional patches from the good old Vyatta times which never made it -into the mainstream Kernel. The patches can be found here: -https://github.com/vyos/vyos-build-kernel/tree/master/patches/kernel and are -automatically applied to the Kernel by the Jenkins Pipeline which is used to -generate the Kernel binaries. - -The Pipeline script not only builds the Kernel with the configuration named -``x86_64_vyos_defconfig`` which is located in the vyos-build-kernel repository, -too - but in addition also builds some Intel out-of-tree drivers, WireGuard -(as long it is not upstreamed) and Accel-PPP. - -The ``Jenkinsfile`` tries to be as verbose as possible on each individual build -step. - -Linux Firmware -^^^^^^^^^^^^^^ - -More and more hardware cards require an additional firmware which is not open -source. The Kernel community hosts a special linux-firmware Git repository -with all available binary files which can be loaded by the Kernel. - -The ``vyos-build`` repository fetches a specific commit of the linux-firmware -repository and embeds those binaries into the resulting ISO image. This step is -done in the ``data/live-build-config/hooks/live/40-linux-firmware.chroot`` file. - -If the firmware needs to be updated it is sufficient to just exchange the Git -commit id we reference in our build. - -Intel NIC drivers -^^^^^^^^^^^^^^^^^ - -We do not make use of the building Intel NIC drivers except for e1000e. Main -reason is that the out of tree Intel drivers seem be perform a bit better, -e.q. have proper receive-side-scaling and multi-queue support. - -Drivers are build as part of the Kernel Pipeline - read above. - -Accel-PPP -^^^^^^^^^ - -Accel-PPP used to be an upstream fork for quite some time but now has been -converted to make use of the upstream source code and build system. - -It is build as part of the Kernel Pipeline - read above. - -hvinfo -^^^^^^ - -A fork with packaging changes for VyOS is kept at https://github.com/vyos/hvinfo - -The original repo is at https://github.com/dmbaturin/hvinfo - -It's an Ada program and requires GNAT and gprbuild for building, dependencies -are properly specified so just follow debuild's suggestions. - -Per-file modifications -^^^^^^^^^^^^^^^^^^^^^^ - -vyos-replace package replaces the upstream dhclient-script with a modified -version that is aware of the VyOS config. - .. _Docker: https://www.docker.com - +.. _`Docker as non-root`: https://docs.docker.com/install/linux/linux-postinstall/#manage-docker-as-a-non-root-user .. _VyOS DockerHub organisation: https://hub.docker.com/u/vyos - .. _repository: https://github.com/vyos/vyos-build - .. _VyOS GitHub project: https://github.com/vyos -- cgit v1.2.3