From d5628237621e2c5ee6b87aaf54d897514d4d30ae Mon Sep 17 00:00:00 2001 From: LBegnaud Date: Sat, 2 Jan 2021 13:49:48 -0600 Subject: azure: update vnet routing/serial console --- docs/installation/cloud/azure.rst | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'docs/installation') diff --git a/docs/installation/cloud/azure.rst b/docs/installation/cloud/azure.rst index fe6a25bd..e19df986 100644 --- a/docs/installation/cloud/azure.rst +++ b/docs/installation/cloud/azure.rst @@ -14,7 +14,7 @@ Deploy VyOS on Azure. .. figure:: /_static/images/cloud-azure-01.png -3. On the marketplace search ``VyOS`` +3. On the marketplace search ``VyOS`` and choose the appropriate subscription .. figure:: /_static/images/cloud-azure-02.png @@ -26,7 +26,7 @@ Deploy VyOS on Azure. .. figure:: /_static/images/cloud-azure-04.png -6. Click ``Review + create``. After fiew second your deployment will be complete +6. Click ``Review + create``. After a few seconds your deployment will be complete .. figure:: /_static/images/cloud-azure-05.png @@ -51,6 +51,22 @@ instance. Attach the interface in the Azure portal and then start the instance. .. note:: Azure does not allow you attach interface when the instance in the **Running** state. +Absorbing Routes +---------------- + +If using as a router, you will want your LAN interface to absorb some or all of the traffic from your VNET by using a route table applied to the subnet. + +1. Create a route table and browse to **Configuration** + +2. Add one or more routes for networks you want to pass through the VyOS VM. Next hop type **Virtual Appliance** with the **Next Hop Address** of the VyOS ``LAN`` interface. + +.. note:: If you want to create a new default route for VMs on the subnet, use **Address Prefix** ``0.0.0.0/0`` Also note that if you want to use this as a typical edge device, you'll want masquerade NAT for the ``WAN`` interface. + +Serial Console +-------------- + +Azure has a way to access the serial console of a VM, but this needs to be configured on the VyOS. It's there by default, but keep it in mind if you are replacing config.boot and rebooting: ``set system console device ttyS0 speed '9600'`` + References ---------- https://azure.microsoft.com -- cgit v1.2.3