From 0c19693d3dc4cd69ba48738155855fed3d1ff5af Mon Sep 17 00:00:00 2001 From: Robert Göhler Date: Sun, 24 Nov 2019 21:26:34 +0100 Subject: Style: change .. cfcmd:: to ..cfgcmd:: --- docs/interfaces/geneve.rst | 8 ++++---- docs/interfaces/wireless.rst | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'docs/interfaces') diff --git a/docs/interfaces/geneve.rst b/docs/interfaces/geneve.rst index ce0273b9..4090b2e5 100644 --- a/docs/interfaces/geneve.rst +++ b/docs/interfaces/geneve.rst @@ -30,15 +30,15 @@ Geneve Header: | Variable Length Options | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -.. cfcmd:: set interfaces geneve gnv0 address '192.0.2.2/24' +.. cfgcmd:: set interfaces geneve gnv0 address '192.0.2.2/24' Create GENEVE tunnel listening on local address `192.0.2.2/24`. -.. cfcmd:: set interfaces geneve gnv0 remote '172.18.204.10' +.. cfgcmd:: set interfaces geneve gnv0 remote '172.18.204.10' Specify the IP address of the other end of the tunnel. -.. cfcmd:: set interfaces geneve gnv0 vni '1000' +.. cfgcmd:: set interfaces geneve gnv0 vni '1000' :abbr:`VNI (Virtual Network Identifier)` is an identifier for a unique element of a virtual network. In many situations this may represent an L2 segment, @@ -47,6 +47,6 @@ packets. The VNI MAY be used as part of ECMP forwarding decisions or MAY be used as a mechanism to distinguish between overlapping address spaces contained in the encapsulated packet when load balancing across CPUs. -.. cfcmd:: set interfaces geneve gnv0 mtu +.. cfgcmd:: set interfaces geneve gnv0 mtu Set interface :abbr:`MTU (Maximum Transfer Unit)` size. diff --git a/docs/interfaces/wireless.rst b/docs/interfaces/wireless.rst index 13eef0fe..1ae64644 100644 --- a/docs/interfaces/wireless.rst +++ b/docs/interfaces/wireless.rst @@ -25,7 +25,7 @@ its MAC address) and configured to run in monitor mode. To be able to use the wireless interfaces you will first need to set a regulatory domain with the country code of your locaion. -.. cfcmd:: set system wifi-regulatory-domain DE +.. cfgcmd:: set system wifi-regulatory-domain DE Configure system wide Wi-Fi regulatory domain. A reboot is required for this change to be enabled. -- cgit v1.2.3